Thermodynamic Modeling and Mechanical Properties of Mg-Zn-{Y, Ce} Alloys: Review

Re-assessment of the Mg–Zn–Ce system focusing on the phase equilibria in Mg-rich corner

(2020) Hui Shi et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Microstructure, creep behavior and corrosion resistance in the ultrafine-grained surface layer of Mg-6Zn-0.2Y-0.4Ce-0.5Zr alloy processed by surfacing friction treatment

(2020) Chunquan Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring grain refinement through thickness in magnesium alloy via stationary shoulder friction stir processing and copper backing plate

(2020) Vivek Patel et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility

(2019) Aiyue Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure Evolution of Ultra-Fine-Grained AZ31 B Magnesium Alloy Produced by Submerged Friction Stir Processing

(2019) Ali Shahnam et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Recrystallization behavior and its relationship with deformation mechanisms of a hot rolled Mg-Zn-Ca-Zr alloy

(2019) J. Victoria-Hernández et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review: Past, present and future of grain refining of magnesium castings

(2019) Erdem Karakulak   Journal of Magnesium and Alloys

Effects of friction stir process and subsequent aging treatment on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy

(2019) Bing Li et al.   MATERIALS CHARACTERIZATION

Simultaneously improving elastic modulus and damping capacity of extruded Mg-Gd-Y-Zn-Mn alloy via alloying with Si

(2019) Di Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

On the role of Sc or Er micro-alloying in the microstructure evolution of Al-Mg alloy sheets during annealing

(2019) Le Fu et al.   MATERIALS CHARACTERIZATION

Hot compression deformation behavior of Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy

(2019) Cong Wang et al.   MATERIALS CHARACTERIZATION

Effect of substitution of Zn with Ni on microstructure evolution and mechanical properties of LPSO dominant Mg–Y–Zn alloys

(2019) Jinbei Lyu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of impurity reduction on dynamic recrystallization, texture evolution and mechanical anisotropy of rolled AZ31 alloy

(2019) Di Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A simultaneous increase of elastic modulus and ductility by Al and Li additions in Mg-Gd-Zn-Zr-Ag alloy

(2019) Teng Tu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain hardening behavior of Mg–Y alloys after extrusion process

(2019) Chaoyue Zhao et al.   Journal of Magnesium and Alloys

Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion

(2018) W.T. Sun et al.   ACTA MATERIALIA

Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion

(2018) M.G. Jiang et al.   ACTA MATERIALIA

Influence of sealing post-treatments on the corrosion resistance of PEO coated AZ91 magnesium alloy

(2018) B. Mingo et al.   APPLIED SURFACE SCIENCE

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

(2018) Wei Zhang et al.   PHILOSOPHICAL MAGAZINE

The effect of Y addition on recrystallization and mechanical properties of Mg–6Zn–xY–0.5Ce–0.4Zr alloys

(2018) Lizi Liu et al.   VACUUM

Simultaneously enhanced strength and corrosion resistance of Mg–3Al–1Zn alloy sheets with nano-grained surface layer produced by sliding friction treatment

(2017) W.T. Huo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure, microtexture and precipitation in the ultrafine-grained surface layer of an Al-Zn-Mg-Cu alloy processed by sliding friction treatment

(2017) Yanxia Chen et al.   MATERIALS CHARACTERIZATION

The depth-dependent gradient deformation bands in a sliding friction treated Al-Zn-Mg-Cu alloy

(2017) Yanxia Chen et al.   MATERIALS CHARACTERIZATION

Dynamic precipitation behavior and mechanical property of an Mg 94 Y 4 Zn 2 alloy prepared by multi-pass successive equal channel angular pressing

(2017) Huan Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of Zn addition on the mechanical properties and texture of extruded Mg-Zn-Ca-Ce magnesium alloy sheets

(2017) Guangang Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of LPSO phase dominant Mg 85.8 Y 7.1 Zn 7.1 and Mg 85.8 Y 7.1 Ni 7.1 alloys

(2017) S.M. Zhu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Gradient shear banding in a magnesium alloy induced by sliding friction treatment

(2017) W. Zhang et al.   VACUUM

Dynamic recrystallization in nanocrystalline AZ31 Mg-alloy

(2017) W. Zhang et al.   VACUUM

Effect of volume fraction of LPSO phases on corrosion and mechanical properties of Mg-Zn-Y alloys

(2017) C.Q. Li et al.   MATERIALS & DESIGN

Influence of long period stacking ordered phase arrangements on the corrosion behaviour of extruded Mg97Y2Zn1 alloy

(2016) P. Pérez et al.   CORROSION SCIENCE

Thermodynamic modelling and in-situ neutron diffraction investigation of the (Ce + Mg + Zn) system

(2016) Zhijun Zhu et al.   JOURNAL OF CHEMICAL THERMODYNAMICS

Influence of the processing route on the mechanical properties at high temperatures of Mg-Ni-Y-RE alloys containing LPSO-phases

(2016) S. González et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: A review

(2016) Daokui Xu et al.   Progress in Natural Science-Materials International

Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: A review

(2016) Daokui Xu et al.   Progress in Natural Science-Materials International

Ultrafine-grained Al–0.2Sc–0.1Zr alloy: The mechanistic contribution of nano-sized precipitates on grain refinement during the novel process of accumulative continuous extrusion

(2015) Y.F. Shen et al.   ACTA MATERIALIA

Thermodynamic modeling of the Y–Mg–Zn, Gd–Mg–Zn, Tb–Mg–Zn, Dy–Mg–Zn, Ho–Mg–Zn, Er–Mg–Zn, Tm–Mg–Zn and Lu–Mg-Zn systems

(2015) Zhijun Zhu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Critical assessment and optimization of phase diagrams and thermodynamic properties of RE–Zn systems – Part II – Y–Zn, Eu–Zn, Gd–Zn, Tb–Zn, Dy–Zn, Ho–Zn, Er–Zn, Tm–Zn, Yb–Zn and Lu–Zn

(2015) Zhijun Zhu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Ce additions on the age hardening response of Mg–Zn alloys

(2015) Brian Langelier et al.   MATERIALS CHARACTERIZATION

Effect of different post-treatments on the corrosion resistance and tribological properties of AZ91D magnesium alloy coated PEO

(2015) A. Castellanos et al.   SURFACE & COATINGS TECHNOLOGY

Evaluating the effect of yttrium as a solute strengthener in magnesium using in situ neutron diffraction

(2014) N. Stanford et al.   ACTA MATERIALIA

Enhancement of properties in cast Mg–Y–Zn rod processed by severe plastic deformation

(2014) Rimma Lapovok et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Optimization of strength by microstructural refinement of MgY2Zn1 alloy during extrusion and ECAP processing

(2014) G. Garces et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Surface nanocrystallization of Cu and Ta by sliding friction

(2014) Y.S. Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring microstructure of Mg–Zn–Y alloys with quasicrystal and related phases for high mechanical strength

(2014) Alok Singh   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Highly ordered 10H-type long-period stacking order phase in a Mg–Zn–Y ternary alloy

(2014) Michiaki Yamasaki et al.   SCRIPTA MATERIALIA

Phase Equilibria of the Ce-Mg-Zn Ternary System at 300 °C

(2014) Ahmad Mostafa et al.   Metals

Physics and model of strengthening by parallel stacking faults

(2013) W. W. Jian et al.   APPLIED PHYSICS LETTERS

Investigation of rare earth sealing of porous micro-arc oxidation coating formed on AZ91D magnesium alloy

(2013) M. Laleh et al.   JOURNAL OF RARE EARTHS

Improved ductility of magnesium alloys by a simple shear process followed by annealing

(2013) Hua Zhang et al.   SCRIPTA MATERIALIA

Phase equilibria and transformations in ternary Mg-rich Mg–Y–Zn alloys

(2012) J. Gröbner et al.   ACTA MATERIALIA

Corrosion Behavior of Mg–Zn–Y Alloy with Long-period Stacking Ordered Structures

(2012) Jinshan Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of long period stacking ordered phase on the microstructure, texture and mechanical properties of extruded Mg–Y–Zn alloy

(2012) L.B. Tong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Intermetallics and phase relations of Mg-Zn-Ce alloys at 400 °C

(2012) Ming-li HUANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy

(2011) Michiaki Yamasaki et al.   ACTA MATERIALIA

Corrosion and wear properties of PEO coatings formed on AM60B alloy in NaAlO2 electrolytes

(2011) Xijin Li et al.   APPLIED SURFACE SCIENCE

Critical assessment and thermodynamic modeling of Mg–Zn, Mg–Sn, Sn–Zn and Mg–Sn–Zn systems

(2011) P. Ghosh et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

The isothermal section of the phase diagram of Ce–Mg–Zn ternary system at 470 K

(2011) V. Pavlyuk et al.   INTERMETALLICS

High temperature processing of Mg–Zn–Y alloys containing quasicrystal phase for high strength

(2011) Alok Singh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) alloy

(2011) S.W. Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Ce on microstructures and mechanical properties of rapidly solidified Mg–Zn alloy

(2011) T Zhou et al.   MATERIALS SCIENCE AND TECHNOLOGY

Microstructure, Texture and Mechanical Properties of Mg-Zn-Ce Alloy Extruded at Different Temperatures

(2011) Yasumasa Chino et al.   MATERIALS TRANSACTIONS

Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy

(2010) K. Hagihara et al.   ACTA MATERIALIA

The 18R and 14H long-period stacking ordered structures in Mg–Y–Zn alloys

(2010) Y.M. Zhu et al.   ACTA MATERIALIA

Effects of yttrium and zinc addition on the microstructure and mechanical properties of Mg–Y–Zn alloys

(2010) Bin Chen et al.   JOURNAL OF MATERIALS SCIENCE

Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy

(2010) Yasumasa Chino et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of calcium on the texture, microstructure and mechanical properties of extruded Mg–Mn–Ca alloys

(2010) N. Stanford   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-ductility magnesium–zinc–cerium extrusion alloys

(2010) A.A. Luo et al.   SCRIPTA MATERIALIA

Key R&D activities for development of new types of wrought magnesium alloys in China

(2010) Fu-sheng PAN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructures and mechanical properties of Mg-2%Zn-0.4%RE alloys

(2010) Qi-chi LE et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation

(2009) J.D. Robson et al.   ACTA MATERIALIA

Experimental study and thermodynamic assessment of ternary Mg–Zn–Ce phase relations focused on Mg-rich alloys

(2009) Chen-nan Chiu et al.   INTERMETALLICS

Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys

(2009) L. Gao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A new hexagonal phase displaying pseudo-icosahedral symmetry in Zn–Mg–Y alloy

(2009) M.R. Li et al.   SCRIPTA MATERIALIA

Partial phase relationships of Mg-Zn-Ce system at 350 °C

(2009) Ming-li HUANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Thermodynamic assessment of the Ca–Zn, Sr–Zn, Y–Zn and Ce–Zn systems

(2008) Philip J. Spencer et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys

(2008) Ming Liu et al.   CORROSION SCIENCE

Solid solution strengthening behaviors in binary Mg–Y single phase alloys

(2008) L. Gao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Experimental study of the Ce–Mg–Zn phase diagram at 350°C via diffusion couple techniques

(2008) D. Kevorkov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Electrochemical corrosion behavior of composite MAO/sol–gel coatings on magnesium alloy AZ91D using combined micro-arc oxidation and sol–gel technique

(2008) Wei Shang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The equilibrium phase diagram of the magnesium–copper–yttrium system

(2008) Mohammad Mezbahul-Islam et al.   JOURNAL OF CHEMICAL THERMODYNAMICS

The recrystallization and texture of magnesium–zinc–cerium alloys

(2008) L MACKENZIE et al.   SCRIPTA MATERIALIA

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys

(2008) N. Stanford et al.   SCRIPTA MATERIALIA

Thermodynamic assessment of the Zn–Y and Al–Zn–Y systems

(2007) X.J. Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Thermodynamic modeling of the Ce–Zn and Pr–Zn systems

(2007) C.P. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterization and properties of nanocrystalline surface layer in Mg alloy induced by surface mechanical attrition treatment

(2007) Ying-hui Wei et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Development of Mg–6.0%Zn–1.0%Y–0.6%Ce–0.6%Zr magnesium alloy and its microstructural evolution during processing

(2007) Xuefeng Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING