Application of the electric resistance tomographic technique to investigate its efficacy in cuttings transport in horizontal drilling scenarios

Investigation of cuttings transport in a horizontal well with high-speed visualization and electrical resistance tomography technique

(2021) Mohammad Mojammel Huque et al.   Journal of Natural Gas Science and Engineering

Investigating the Characteristics of Two-Phase Flow Using Electrical Capacitance Tomography (ECT) for Three Pipe Orientations

(2020) Zeyad Almutairi et al.   Processes

A novel gas/liquid two-phase flow imaging method through electrical resistance tomography with DDELM-AE sparse dictionary

(2020) Bo Li et al.   Sensor Review

Flow Regime, Slug Frequency and Wavelet Analysis of Air/Newtonian and Air/non-Newtonian Two-Phase Flow

(2020) Munzarin Morshed et al.   Applied Sciences-Basel

Effect of the Particle Size on the Near-Wall Turbulence Characteristics of the Polymer Fluid Flow and the Critical Velocity Required for Particle Removal from the Sand Bed Deposited in Horizontal Wells

(2020) Mehmet Meric Hirpa et al.   Energies

Process Monitoring of Antisolvent Based Crystallization in Low Conductivity Solutions Using Electrical Impedance Spectroscopy and 2-D Electrical Resistance Tomography

(2020) Guruprasad Rao et al.   Applied Sciences-Basel

Measuring solid cuttings transport in Newtonian fluid across horizontal annulus using electrical resistance tomography (ERT)

(2020) M. Fahed Qureshi et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Experimental investigation of hole cleaning in directional drilling by using nano-enhanced water-based drilling fluids

(2019) Natalie Vanessa Boyou et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Improving the performance of oil based mud and water based mud in a high temperature hole using nanosilica nanoparticles

(2019) Allan Katende et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Experimental investigation of the effect of drill pipe rotation on improving hole cleaning using water-based mud enriched with polypropylene beads in vertical and horizontal wellbores

(2019) Nursyafiqah S. Heshamudin et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Cuttings Transport Using Pulsed Drilling Fluid in the Horizontal Section of the Slim-Hole: An Experimental and Numerical Simulation Study

(2019) Xiaohua Zhu et al.   Energies

A perspective on dual purpose gas hydrate and corrosion inhibitors for flow assurance

(2019) Ali Qasim et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Hole cleaning and drilling fluid sweeps in horizontal and deviated wells: Comprehensive review

(2019) Husameldin Mahmoud et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Experimental investigation on an aerated mixing vessel through electrical resistance tomography (ERT) and response surface methodology (RSM)

(2018) Divya Malik et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Performance of polyethylene and polypropylene beads towards drill cuttings transportation in horizontal wellbore

(2018) Hadyan Hakim et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

A new equation for predicting settling velocity of solid spheres in fiber containing power-law fluids

(2018) Liu Qingling et al.   POWDER TECHNOLOGY

Transient Coupling of Swab/Surge Pressure and In-situ Stress for Wellbore-Stability Evaluation During Tripping

(2018) Feifei Zhang et al.   SPE JOURNAL

Tetramethyl ammonium chloride as dual functional inhibitor for methane and carbon dioxide hydrates

(2018) Muhammad Saad Khan et al.   FUEL

Nonlinear model predictive control of a Hammerstein Weiner model based experimental managed pressure drilling setup

(2018) Al Amin et al.   ISA TRANSACTIONS

Improving hole cleaning using low density polyethylene beads at different mud circulation rates in different hole angles

(2018) Wong Jenn Yeu et al.   Journal of Natural Gas Science and Engineering

Study of granular flow in silo based on electrical capacitance tomography and optical imaging

(2017) K. Grudzień et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Visualization System for Large-Scale Silo Flow Monitoring Based on ECT Technique

(2017) Krzysztof Grudzien   IEEE SENSORS JOURNAL

Application of Hydrated Basil Seeds (HBS) as the herbal fiber on hole cleaning and filtration control

(2017) Hamed Movahedi et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Hole-cleaning performance comparison of oil-based and water-based drilling fluids

(2017) Sneha Sayindla et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Cuttings-Transport Simulation Combined With Large-Scale-Flow-Loop Experimental Results and Logging-While-Drilling Data for Hole-Cleaning Evaluation in Directional Drilling

(2017) Shigemi Naganawa et al.   SPE DRILLING & COMPLETION

Experimental investigation of cuttings bed erosion in horizontal wells using water and drag reducing fluids

(2016) Fabio Ernesto Rodriguez Corredor et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Settling behavior of particles in fiber-containing Herschel Bulkley fluid

(2016) Rida Elgaddafi et al.   POWDER TECHNOLOGY

Transport of small cuttings in solid-liquid flow with inclined slim hole annulus

(2014) Young-Ju Kim et al.   Journal of Mechanical Science and Technology

Electrical resistance tomography: A review of the application of conducting vessel walls

(2014) Suzanna Ridzuan Aw et al.   POWDER TECHNOLOGY

Electrical resistance tomography (ERT) for flow and velocity profile measurement of a single phase liquid in a horizontal pipe

(2013) Mohadeseh Sharifi et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

The parameters measurement of air–water two phase flow using the electrical resistance tomography (ERT) technique in a bubble column

(2013) Haibo Jin et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Cuttings Transport Models and Experimental Visualization of Underbalanced Horizontal Drilling

(2013) Na Wei et al.   MATHEMATICAL PROBLEMS IN ENGINEERING

Fluid bed characterization using Electrical Capacitance Volume Tomography (ECVT), compared to CPFD Software's Barracuda

(2013) Justin M. Weber et al.   POWDER TECHNOLOGY

Determining the viscous behavior of non-Newtonian fluids in a flume using a laminar sheet flow model and Ultrasonic Velocity Profiling (UVP) system

(2012) Rainer Haldenwang et al.   Journal of the Brazilian Society of Mechanical Sciences and Engineering

Hole-Cleaning Performance of Gasified Drilling Fluids in Horizontal Well Sections

(2012) Evren M. Ozbayoglu et al.   SPE JOURNAL

Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation

(2011) Ville Rimpiläinen et al.   CHEMICAL ENGINEERING SCIENCE

Theoretical study of vertical slug flow measurement by data fusion from electromagnetic flowmeter and electrical resistance tomography

(2011) Xiang Deng et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Description of the silo flow and bulk solid pulsation detection using ECT

(2010) Krzysztof Grudzien et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Characterization of polyethersulfone/polyimide blend membranes prepared by a dry/wet phase inversion: Precipitation kinetics, morphology and gas separation

(2010) Junyoung Han et al.   JOURNAL OF MEMBRANE SCIENCE

Critical Fluid Velocities for Removing Cuttings Bed Inside Horizontal and Deviated Wells

(2010) M. E. Ozbayoglu et al.   PETROLEUM SCIENCE AND TECHNOLOGY

Experimental Study and Modeling of Cuttings Transport Using Foam With Drillpipe Rotation

(2010) Mingqin Duan et al.   SPE DRILLING & COMPLETION

CFD and ERT investigations on two-phase flow regimes in vertical and horizontal tubes

(2009) A. Parvareh et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER