Superhydrophobic/Superhydrophilic Hybrid Copper Surface Enhanced Micro Heat Pipe by Using Laser Selective Texturing

Influence of groove parameters on the thermal hydraulic performance of a composite porous vapor chamber: a numerical study

(2020) Qing-Hui Wang et al.   APPLIED THERMAL ENGINEERING

Paper Title: Effect of the working fluid transportation in the copper composite wick on the evaporation efficiency of a flat loop heat pipe

(2020) Jiayin Xu et al.   APPLIED THERMAL ENGINEERING

Thermal performance of a thin flat heat pipe with grooved porous structure

(2020) Minghan Zhu et al.   APPLIED THERMAL ENGINEERING

Laser engineering of biomimetic surfaces

(2020) E. Stratakis et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Perspectives on the spark plasma sintering process

(2020) Zuhair A. Munir et al.   Journal of Materials Science

Experimental Investigation on the Vapor Chambers with Sintered Copper Powder Wick

(2020) Dou Huang et al.   Journal of Thermal Science

Relative contribution of wettability Alteration and interfacial tension reduction in EOR: A critical review

(2020) Xiao Deng et al.   JOURNAL OF MOLECULAR LIQUIDS

Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications

(2019) Davoud Jafari et al.   APPLIED THERMAL ENGINEERING

Optimization design of grooved evaporator wick structures in vapor chamber heat spreaders

(2019) Baotong Li et al.   APPLIED THERMAL ENGINEERING

Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants

(2018) Martinus A. Arie et al.   APPLIED THERMAL ENGINEERING

Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes

(2018) Heng Tang et al.   APPLIED THERMAL ENGINEERING

Thermal performance of the flat micro-heat pipe with the wettability gradient surface by laser fabrication

(2018) Xiaozhu Xie et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Liquid–vapor phase behavior and operating characteristics of the capillary evaporator of a loop heat pipe at start-up

(2018) M. Nishikawara et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior

(2018) Swee Leong Sing et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

New evaporator structure for micro loop heat pipes

(2017) Kazuki Fukushima et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Enhancement of thermal performance of micro heat pipes using wettability gradients

(2017) Manjinder Singh et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Smart design of wettability-patterned gradients on substrate-independent coated surfaces to control unidirectional spreading of droplets

(2017) Huaping Wu et al.   Soft Matter

Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting

(2016) Y.J. Liu et al.   ACTA MATERIALIA

Thermal performance of ultra-thin flattened heat pipes with composite wick structure

(2016) Yong Li et al.   APPLIED THERMAL ENGINEERING

An ultra-thin miniature loop heat pipe cooler for mobile electronics

(2016) Guohui Zhou et al.   APPLIED THERMAL ENGINEERING

Cryogenic flat-panel gas-gap heat switch

(2016) S. Vanapalli et al.   CRYOGENICS

Rapid processing and assembly of semiconductor thermoelectric materials for energy conversion devices

(2016) Ahmed El-Desouky et al.   MATERIALS LETTERS

Investigation of ultra-thin flattened heat pipes with sintered wick structure

(2015) Yong Li et al.   APPLIED THERMAL ENGINEERING

An asymmetrical vapor chamber with multiscale micro/nanostructured surfaces

(2014) Zhen Sun et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Wettability patterning for high-rate, pumpless fluid transport on open, non-planar microfluidic platforms

(2014) Aritra Ghosh et al.   LAB ON A CHIP

A novel method for manufacturing sintered aluminium heat pipes (SAHP)

(2013) M. Ameli et al.   APPLIED THERMAL ENGINEERING

Experimental investigations of flat plate heat pipes with interlaced narrow grooves or channels as capillary structure

(2013) Chen Wang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Directional wetting on chemically patterned substrates

(2012) E.S. Kooij et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Loop Heat Pipes: A Review of Fundamentals, Operation,and Design

(2011) Amrit Ambirajan et al.   HEAT TRANSFER ENGINEERING

Do surfaces with mixed hydrophilic and hydrophobic areas enhance pool boiling?

(2010) Amy Rachel Betz et al.   APPLIED PHYSICS LETTERS

Design and Test of Carbon Nanotube Biwick Structure for High-Heat-Flux Phase Change Heat Transfer

(2010) Qingjun Cai et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Biomimetic Artificial Surfaces Quantitatively Reproduce the Water Repellency of a Lotus Leaf

(2008) Vassilia Zorba et al.   ADVANCED MATERIALS