Characterisation of Wood Particles Used in the Particleboard Production as a Function of Their Moisture Content
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Characterisation of Wood Particles Used in the Particleboard Production as a Function of Their Moisture Content
Authors
Keywords
-
Journal
Materials
Volume 15, Issue 1, Pages 48
Publisher
MDPI AG
Online
2021-12-23
DOI
10.3390/ma15010048
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Potential of Brewer’s Spent Grain as a Potential Replacement of Wood in pMDI, UF or MUF Bonded Particleboard
- (2021) Marius Cătălin Barbu et al. Polymers
- Effect of face-layer moisture content and face–core–face ratio of mats on the temperature and vapor pressure behavior during hot-pressing of wood-based panel manufacturing
- (2021) Kazushige Murayama et al. JOURNAL OF WOOD SCIENCE
- Properties of Eco-Friendly Particleboards Bonded with Lignosulfonate-Urea-Formaldehyde Adhesives and pMDI as a Crosslinker
- (2021) Pavlo Bekhta et al. Materials
- Acoustic Properties of Larch Bark Panels
- (2021) Eugenia Mariana Tudor et al. Forests
- Thermophysical Properties of Larch Bark Composite Panels
- (2021) Lubos Kristak et al. Polymers
- Alternative lignocellulosic raw materials in particleboard production: A review
- (2021) Marta Pędzik et al. INDUSTRIAL CROPS AND PRODUCTS
- Analyzing bulk density and void fraction: B. Effect of moisture content and compression pressure
- (2020) Haim Kalman et al. POWDER TECHNOLOGY
- New insight into the use of latent catalysts for the synthesis of urea formaldehyde adhesives and the mechanical properties of medium density fiberboards bonded with them
- (2019) Ali Dorieh et al. EUROPEAN POLYMER JOURNAL
- Three bulk density measurement methods provide different results for commercial scale harvests of willow biomass chips
- (2019) Mark H. Eisenbies et al. BIOMASS & BIOENERGY
- The effect of mat layers moisture content on some properties of particleboard
- (2019) Abdullah Istek et al. Drvna Industrija
- Characteristics of straw particles of selected grain species purposed for the production of lignocellulose particleboards
- (2019) Dorota Dukarska et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Experimental determination of the compression resistance of differently shaped wood particles as influencing parameter on wood-reduced particleboard manufacturing
- (2017) Jan T. Benthien et al. European Journal of Wood and Wood Products
- Improving characteristics of melamine–urea–formaldehyde resin by addition of blocked polyurethane prepolymer
- (2016) Jun Jiang et al. European Journal of Wood and Wood Products
- Construction particleboards made from rapeseed straw glued with hybrid pMDI/PF resin
- (2016) Dorota Dukarska et al. European Journal of Wood and Wood Products
- Size, shape and flow characterization of ground wood chip and ground wood pellet particles
- (2016) Hamid Rezaei et al. POWDER TECHNOLOGY
- Airflow versus pressure drop for a mixture of bulk wood chips and bark at different moisture contents
- (2015) Ireneusz Grubecki BIOSYSTEMS ENGINEERING
- Effect of Particle Size and Geometry on the Performance of Single-layer and Three-layer Particleboard Made from Sunflower Seed Husks
- (2015) Camelia N. Cosereanu et al. BioResources
- The temperature behaviour inside the mat of wood-based panel during hot pressing under various manufacturing conditions
- (2014) Muhammad Navis Rofii et al. JOURNAL OF WOOD SCIENCE
- The Influences of Drying Temperature of Wood Particles on the Quality Properties of Particleboard Composite
- (2013) Bünyamin Sarı et al. DRYING TECHNOLOGY
- Moisture-dependent physical properties of Moringa oleifera seed relevant in bulk handling and mechanical processing
- (2012) Ndubisi A. Aviara et al. INDUSTRIAL CROPS AND PRODUCTS
- Blowout conditions and properties of isocyanate resin bonded particleboard manufactured from high-moisture particles using an air-injection press
- (2012) Hideaki Korai et al. JOURNAL OF WOOD SCIENCE
- Physical Properties for Flow Characterization of Ground Biomass from Douglas Fir Wood
- (2012) K. Tannous et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Physical properties of solid biomass
- (2011) M.R. Wu et al. BIOMASS & BIOENERGY
- Development of an air-injection press for preventing blowout of particleboard I: effects of an air-injection press on board properties
- (2011) Hideaki Korai et al. JOURNAL OF WOOD SCIENCE
- Physical and flow properties of pecan shells—Particle size and moisture effects
- (2011) B. Littlefield et al. POWDER TECHNOLOGY
- Selected properties of particleboard panels manufactured from rice straws of different geometries
- (2010) Xianjun Li et al. BIORESOURCE TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started