Tribological behavior of ZK60 magnesium matrix composite reinforced by hybrid MWCNTs/B4C prepared by stir casting method
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Tribological behavior of ZK60 magnesium matrix composite reinforced by hybrid MWCNTs/B4C prepared by stir casting method
Authors
Keywords
Tribological behavior, ZK60 magnesium alloy, Hybrid reinforcement, MWCNTs, B, 4, C
Journal
TRIBOLOGY INTERNATIONAL
Volume 165, Issue -, Pages 107299
Publisher
Elsevier BV
Online
2021-10-02
DOI
10.1016/j.triboint.2021.107299
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Synthesis, physico-mechanical and microstructural characterization of Al6063/SiC/PKSA hybrid reinforced composites
- (2021) P. P. Ikubanni et al. Scientific Reports
- Tribological behaviour of AZ31 magnesium alloy reinforced by bimodal size B4C after precipitation hardening
- (2021) Seyed Kiomars Moheimani et al. Journal of Magnesium and Alloys
- Tensile properties and microstructure of ZK60/SiCw composite after extrusion and aging
- (2020) Morteza Tayebi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation of mechanical properties and biocorrosion behavior of in situ and ex situ Mg composite for orthopedic implants
- (2020) Morteza Tayebi et al. Materials Science & Engineering C-Materials for Biological Applications
- Wear behavior of the friction stir alloyed AZ31 Mg at different volume fractions of Al particles reinforcement and its enhanced quality attributes
- (2020) Prakash K. Sahu et al. TRIBOLOGY INTERNATIONAL
- Tribological behaviour of self-lubricating Mg matrix composites reinforced with silicon carbide and tungsten disulfide
- (2020) Juanjuan Zhu et al. TRIBOLOGY INTERNATIONAL
- 1Influence of graphene oxide additive on the tribological and electrochemical corrosion properties of a PEO coating prepared on AZ31 magnesium alloy
- (2020) Yulin Zhang et al. TRIBOLOGY INTERNATIONAL
- Creep Behavior of ZK60 Alloy and ZK60/SiCw Composite After Extrusion and Precipitation Hardening
- (2020) Morteza Tayebi et al. METALS AND MATERIALS INTERNATIONAL
- The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel
- (2020) H.R. Jafarian et al. Journal of Materials Research and Technology-JMR&T
- Improvement of thermal properties of Al/Cu/SiC composites by tailoring the reinforcement microstructure and comparison to thermoelastic models
- (2020) Morteza Tayebi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development of wear maps of in-situ TiC+TiB2 reinforced AZ91 Mg matrix composite with varying microstructural conditions
- (2019) B.N. Sahoo et al. TRIBOLOGY INTERNATIONAL
- Effect of Al-B4C nanocomposite filler manufactured by accumulative roll bonding (ARB) method on the microstructure and mechanical properties of weldings prepared by tungsten inert gas welding
- (2019) Mohammad Sadegh Bayati et al. Materials Research Express
- Investigating the effect of SiC particles on the physical and thermal properties of Al6061/SiCp composite
- (2019) Reza Zare et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of CNT on microstructure, dry sliding wear and compressive mechanical properties of AZ61 magnesium alloy
- (2019) Song Jeng Huang et al. Journal of Materials Research and Technology-JMR&T
- Thermal expansion behavior of Al–B4C composites by powder metallurgy
- (2019) Morteza Tayebi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tribological effects of carbon nanotubes on magnesium alloy AZ31 and analyzing aging effects on CNTs/AZ31 composites fabricated by stir casting process
- (2019) Aqeel Abbas et al. TRIBOLOGY INTERNATIONAL
- Effect of laser shock peening on tribological properties of magnesium alloy ZK60
- (2019) Yu Guo et al. TRIBOLOGY INTERNATIONAL
- Lubrication characteristics and wear mechanism mapping for hybrid aluminium metal matrix composite sliding under surfactant functionalized MWCNT-oil
- (2019) Harpreet Singh et al. TRIBOLOGY INTERNATIONAL
- Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy
- (2018) Bo Mao et al. APPLIED SURFACE SCIENCE
- Hall-Petch relationship in Mg alloys: A review
- (2018) Huihui Yu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of hybrid ratio on friction and wear behavior of AZ91D matrix nanocomposites under oil lubricated conditions
- (2018) Xia ZHOU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites
- (2018) L. Reinert et al. WEAR
- Effect of yttria and benzotriazole doping on wear/corrosion responses of alumina-based nanostructured films
- (2018) Saeid Mersagh Dezfuli et al. CERAMICS INTERNATIONAL
- Deposition of Ni-tungsten carbide nanocomposite coating by TIG welding: Characterization and control of microstructure and wear/corrosion responses
- (2018) Masoud Sabzi et al. CERAMICS INTERNATIONAL
- The effect of pouring temperature and surface angle of vortex casting on microstructural changes and mechanical properties of 7050Al-3 wt% SiC composite
- (2018) S.H. Mousavi Anijdan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of friction stir welded AA6092/SiC metal matrix composite
- (2018) Omar S. Salih et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites
- (2018) Yu Pan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of SiC particles on thermal conductivity of Al-4%Cu/SiC composites
- (2017) Hassan Sharifi et al. HEAT AND MASS TRANSFER
- Alumina-Silica Composite Coatings on Aluminum by Plasma Electrolytic Oxidation: The Effect of Coating Time on Microstructure, Phase, and Corrosion Behavior
- (2017) A. Khakzad et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Dry sliding wear behavior of open-cell Al-Mg/Al 2 O 3 and Al-Mg/SiC-Al 2 O 3 composite preforms produced by a pressureless infiltration technique
- (2017) Hassan Sharifi et al. TRIBOLOGY INTERNATIONAL
- Maximizing the benefit of aluminizing to AZ31 alloy by surface nanocrystallization for elevated resistance to wear and corrosive wear
- (2017) Meisam Nouri et al. TRIBOLOGY INTERNATIONAL
- Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites
- (2017) S. García-Rodríguez et al. WEAR
- Investigation of Microstructure, Mechanical and Wear Behaviour of B4C Particulate Reinforced Magnesium Matrix Composites by Powder Metallurgy
- (2017) Fatih Aydin et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting
- (2017) C. Kannan et al. Journal of Advanced Research
- Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles
- (2016) Linlin Yuan et al. TRIBOLOGY INTERNATIONAL
- Dry tribological behavior of Mg/SiC p composites at room and elevated temperatures
- (2016) F. Labib et al. WEAR
- Investigation on wear properties of AZ31-MWCNT nanocomposites fabricated through mechanical alloying and powder metallurgy
- (2016) Jayakumar Jayaraman et al. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
- Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review
- (2015) Emad Omrani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool geometry, rotation and travel speeds effects on the properties of dissimilar magnesium/aluminum friction stir welded lap joints
- (2015) J. Mohammadi et al. MATERIALS & DESIGN
- Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations
- (2015) J. Mohammadi et al. MATERIALS CHARACTERIZATION
- Development of electroless Ni–P/nano-WC composite coatings and investigation on its properties
- (2015) Hong Luo et al. SURFACE & COATINGS TECHNOLOGY
- Dry sliding frictional characteristics of ZE10 and AZ80 magnesium strips under plastic deformation
- (2015) Maziar Ramezani et al. TRIBOLOGY INTERNATIONAL
- Effect of Tricalcium Magnesium Silicate Coating on the Electrochemical and Biological Behavior of Ti-6Al-4V Alloys
- (2015) Hossein Maleki-Ghaleh et al. PLoS One
- Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing
- (2014) X.J. Wang et al. MATERIALS & DESIGN
- An investigation into the dissolution characteristics of γ precipitates in Mg-3Al-Zn alloy
- (2014) Javad Mohammadi et al. Materials Research-Ibero-american Journal of Materials
- Investigations on mechanical properties of aluminum hybrid composites
- (2014) Dora Siva Prasad et al. Journal of Materials Research and Technology-JMR&T
- Dry sliding wear behavior of AM50B magnesium alloy
- (2013) C. Taltavull et al. MATERIALS & DESIGN
- Effect of SiC concentration in electrolyte on Ni–SiC composite coating properties
- (2013) E Aghaie et al. SURFACE ENGINEERING
- Wear Behavior of Multiwalled Carbon Nanotube/AZ31 Composite Obtained by Friction Stir Processing
- (2013) Mahdiyeh Jamshidijam et al. TRIBOLOGY TRANSACTIONS
- Microstructure and mechanical properties of the motorcycle cylinder body of AM60B magnesium alloy formed by combining die casting and forging
- (2012) Jufu Jiang et al. MATERIALS & DESIGN
- Dynamic recrystallization behavior of particle reinforced Mg matrix composites fabricated by stir casting
- (2012) X.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy
- (2010) Seong-Gu Hong et al. ACTA MATERIALIA
- A friction model for dry contacts during metal-forming processes
- (2010) Maziar Ramezani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Isothermal forging of AZ91 reinforced with 10vol.% silicon carbon particles
- (2010) K.K. Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications
- (2009) Ke Chu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Microstructure evolution and mechanical properties of a particulate reinforced magnesium matrix composites forged at elevated temperatures
- (2009) K.K. Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Highly thermal conductive metal/carbon composites by pulsed electric current sintering
- (2009) Toshiyuki Ueno et al. SYNTHETIC METALS
- Fabrication and properties of graphite flakes/metal composites for thermal management applications
- (2008) R. Prieto et al. SCRIPTA MATERIALIA
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now