Analysis of surface texture of plateau-honed cylinder liner – A review
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Analysis of surface texture of plateau-honed cylinder liner – A review
Authors
Keywords
Cylinder texture, Two-process surfaces, Plateau honing, Segmentation, Modelling
Journal
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Volume 72, Issue -, Pages 807-822
Publisher
Elsevier BV
Online
2021-08-12
DOI
10.1016/j.precisioneng.2021.08.001
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions
- (2021) Bifeng Yin et al. International Journal of Engine Research
- Reducing engine oil and fuel consumptions by multidimensional laser surface texturing on cylinder surface
- (2021) Zhengyang Kang et al. Journal of Manufacturing Processes
- Surfaces—topography and topology
- (2020) Gert W Wolf Surface Topography-Metrology and Properties
- Plateau honing of a diesel engine cylinder with special topography and reasonable machining time
- (2020) Babak Sadizade et al. TRIBOLOGY INTERNATIONAL
- Material ratio curve as information on the state of surface topography—A review
- (2020) Pawel Pawlus et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A review of methods of random surface topography modeling
- (2020) Pawel Pawlus et al. TRIBOLOGY INTERNATIONAL
- The Effect of Honing Angle and Roughness Height on the Tribological Performance of CuNiCr Iron Liner
- (2019) Ma et al. Metals
- Effect of grain size and number of strokes on Rk parameters and emptiness coefficient in honing process
- (2019) Guilherme Henrique Caetano Barros et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Adaptive indirect neural network model for roughness in honing processes
- (2019) Irene Buj-Corral et al. TRIBOLOGY INTERNATIONAL
- Improvement of the Rpq parameter calculation
- (2018) W. Grabon et al. MEASUREMENT
- Evolutions of cylinder liner surface texture and tribological performance of piston ring-liner assembly
- (2018) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Effect of waviness and roughness on cylinder liner friction
- (2018) Eduardo Tomanik et al. TRIBOLOGY INTERNATIONAL
- The combined effect of surface texturing and DLC coating on the functional properties of internal combustion engines
- (2018) Waldemar Koszela et al. TRIBOLOGY INTERNATIONAL
- The effect of plateau honing on the friction and wear of cylinder liners
- (2018) Eun-Seok Kim et al. WEAR
- Low friction and emission cylinder liner surfaces and the influence of surface topography and scale
- (2018) C. Anderberg et al. TRIBOLOGY INTERNATIONAL
- Influence on friction from piston ring design, cylinder liner roughness and lubricant properties
- (2017) Markus Söderfjäll et al. TRIBOLOGY INTERNATIONAL
- Effects of honed cylinder liner surface texture on tribological properties of piston ring-liner assembly in short time tests
- (2017) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Quantification of folded metal in cylinder bores through surface relocation
- (2017) R.B. Obara et al. WEAR
- Multi-scale and multi-fractal analysis of abrasive wear signature of honing process
- (2017) H. Zahouani et al. WEAR
- Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines
- (2016) K. Deepak Lawrence et al. APPLIED SURFACE SCIENCE
- Study of manufacturing and measurement reproducibility on a laser textured structured surface
- (2016) Gavin D. MacAulay et al. MEASUREMENT
- Indirect model for roughness in rough honing processes based on artificial neural networks
- (2016) Maurici Sivatte-Adroer et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Determination of fundamental parameters for the cross-hatched cylinder liner micro-geometry
- (2016) N Biboulet et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Modeling of the cylinder liner “zero-wear” process by two-scale homogenization technique
- (2016) Xianghui Meng et al. WEAR
- Overview of automotive engine friction and reduction trends–Effects of surface, material, and lubricant-additive technologies
- (2016) Victor W. Wong et al. Friction
- Modeling and simulative analysis of the micro-finishing process
- (2015) Petra Kersting et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- 3D surface parameters (ISO 25178-2): Actual meaning of Spk and its relationship to Vmp
- (2015) Luiz Alberto Franco et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Roughness variations in cylinder liners induced by honing tools’ wear
- (2015) F. Cabanettes et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Cross hatched texture influence on the load carrying capacity of oil control rings
- (2015) N. Biboulet et al. TRIBOLOGY INTERNATIONAL
- Smoothness and plateauness contributions to the running-in friction and wear of stratified helical slide and plateau honed cylinder liners
- (2015) M. Yousfi et al. WEAR
- The Effect Of Reference Plane On Values Of Areal Surface Topography Parameters From Cylindrical Elements
- (2014) Przemysław Podulka et al. Metrology and Measurement Systems
- Global energy consumption due to friction in trucks and buses
- (2014) Kenneth Holmberg et al. TRIBOLOGY INTERNATIONAL
- Proposals of methods of oil capacity calculation
- (2014) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- A new procedure for characterizing textured surfaces with a deterministic pattern of valley features
- (2013) A Godi et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Modification of Robust Filtering of Stratified Surface Topography
- (2013) Paweł Dobrzański et al. Metrology and Measurement Systems
- A plateau–valley separation method for textured surfaces with a deterministic pattern
- (2013) Alessandro Godi et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Modelling of surface finish and material removal rate in rough honing
- (2013) Irene Buj-Corral et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- The analysis of directionality of honed cylinder liners surfaces
- (2013) P. Pawlus et al. SCANNING
- Running-in wear modeling of honed surface for combustion engine cylinderliners
- (2013) S. Mezghani et al. WEAR
- Morphologic segmentation algorithms for extracting individual surface features from areal surface topography maps
- (2013) Nicola Senin et al. Surface Topography-Metrology and Properties
- Macroscopic simulation of the liner honing process
- (2012) Benoit Goeldel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Algorithms for morphological profile filters and their comparison
- (2012) Shan Lou et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Improving tribological behaviour of piston ring–cylinder liner frictional pair by liner surface texturing
- (2012) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- Modeling of worn surface topography formed in a low wear process
- (2012) Rafal Reizer et al. WEAR
- The effect of groove texture patterns on piston-ring pack friction
- (2011) S. Mezghani et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Effect of Initial Cylinder Liner Honing Surface Roughness on Aircraft Piston Engine Performances
- (2011) Paweł Woś et al. TRIBOLOGY LETTERS
- Bandwidth characteristics and comparisons of surface texture measuring instruments
- (2010) Richard Leach et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions
- (2010) Wieslaw Grabon et al. TRIBOLOGY INTERNATIONAL
- The use of surface segmentation methods to characterise laser zone surface structure on hard disc drives
- (2010) Liam Blunt et al. WEAR
- Multiscale study of finish-honing process in mass production of cylinder liner
- (2010) L. Sabri et al. WEAR
- The effect of cylinder liner surface topography on abrasive wear of piston–cylinder assembly in combustion engine
- (2010) J. Michalski et al. WEAR
- Characterisation of worn cylinder liner surfaces by segmentation of honing and wear scratches
- (2010) Z. Dimkovski et al. WEAR
- The study of cylinder liner plateau honing process
- (2009) P. Pawlus et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Digital filtering of surface topography: Part II. Applications of robust and valley suppression filters
- (2009) Pawel Dobrzanski et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear
- (2009) Z. Dimkovski et al. WEAR
- Alternative descriptions of roughness for cylinder liner production
- (2008) C. Anderberg et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Friction and wear bench tests of different engine liner surface finishes
- (2008) Eduardo Tomanik TRIBOLOGY INTERNATIONAL
- New cylinder liner surfaces for low oil consumption
- (2008) Staffan Johansson et al. TRIBOLOGY INTERNATIONAL
- A Study of Torn and Folded Metal (TFM) on Honed Cylinder Bore Surfaces
- (2008) P. S. Gupte et al. TRIBOLOGY TRANSACTIONS
- Simulation of cylinder ‘zero-wear’ process
- (2008) Paweł Pawlus et al. WEAR
- Simulation of stratified surface topographies
- (2007) Pawel Pawlus WEAR
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started