Improving intermetallic compounds inhomogeneity of Ti/Al butt joints by dual laser-beam bilateral synchronous welding-brazing

Interface characteristics and reaction mechanism of steel/Al welds produced by magnetic field assisted laser welding-brazing

(2021) Fei Yan et al.   OPTICS AND LASER TECHNOLOGY

Effects of melt temperature on the magnetic treated refinement of eutectic and primary phases in Al-Fe binary alloy melt by measuring thermopower

(2020) Qing Lan et al.   JOURNAL OF CRYSTAL GROWTH

Microstructure and tensile properties of Ti/Al dissimilar joint by laser welding-brazing at subatmospheric pressure

(2020) Xi Chen et al.   Journal of Manufacturing Processes

Study on the shear performance and fracture mechanism of T-joints for 2219 aluminum alloy by dual laser-beam bilateral synchronous welding

(2020) Yanqiu Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Study on 2219 Al-Cu alloy T-joint used dual laser beam bilateral synchronous welding: Parameters optimization based on the simulation of temperature field and residual stress

(2020) Shuai Chen et al.   OPTICS AND LASER TECHNOLOGY

Research on interfacial layer of laser-welded aluminum to titanium

(2019) Ping Jiang et al.   MATERIALS CHARACTERIZATION

Effects of laser power on the interfacial intermetallic compounds and mechanical properties of dual-spot laser welded–brazed Ti/Al butt joint

(2019) Peng Li et al.   OPTICS AND LASER TECHNOLOGY

Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys

(2018) Yaqoob Mohsin Baqer et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing

(2018) Yufeng Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

TIG welding-brazing of Ti6Al4V and Al5052 in overlap configuration with assistance of zinc foil

(2018) Haodong Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of dual laser beam on dissimilar welding-brazing of aluminum to galvanized steel

(2018) Masoud Mohammadpour et al.   OPTICS AND LASER TECHNOLOGY

Low temperature heat treatments of AA5754-Ti6Al4V dissimilar laser welds: Microstructure evolution and mechanical properties

(2018) P. Leo et al.   OPTICS AND LASER TECHNOLOGY

Microstructural characterization and mechanical performance of Al–Cu–Li alloy electron beam welded joint

(2018) Li Zhao et al.   AEROSPACE SCIENCE AND TECHNOLOGY

Off-Set and Focus Effects on Grade 5 Titanium to 6061 Aluminum Alloy Fiber Laser Weld

(2018) Giuseppe Casalino et al.   Materials

The influence of heat input on microstructure and mechanical properties for dissimilar welding of galvanized steel to 6061 aluminum alloy in a zero-gap lap joint configuration

(2017) Chunming Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Aluminum to titanium laser welding-brazing in V-shaped groove

(2017) I. Tomashchuk et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructural characterization and mechanical properties of Al/Ti joint welded by CMT method—Assisted hybrid magnetic field

(2017) Q.J. Sun et al.   MATERIALS & DESIGN

Effect of friction spot welding (FSpW) on the surface corrosion behavior of overlapping AA6181-T4/Ti-6Al-4V joints

(2017) G.S. Vacchi et al.   MATERIALS & DESIGN

Flux-free laser joining of aluminum and galvanized steel

(2015) Sascha Frank   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Direct keyhole laser welding of aluminum alloy AA5754 to titanium alloy Ti6Al4V

(2015) I. Tomashchuk et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Self-consistent modeling of keyhole and weld pool dynamics in tandem dual beam laser welding of aluminum alloy

(2015) Shengyong Pang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Yb–YAG laser offset welding of AA5754 and T40 butt joint

(2015) Giuseppe Casalino et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys

(2015) R.I. Rodriguez et al.   MATERIALS & DESIGN

Generation and characterization of T40/A5754 interfaces with lasers

(2014) Patrice Peyre et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and Tensile Behavior of Laser Arc Hybrid Welded Dissimilar Al and Ti Alloys

(2014) Ming Gao et al.   Materials

Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove

(2012) Zhihua Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer

(2012) Ming Gao et al.   SCRIPTA MATERIALIA

Improving interfacial reaction nonhomogeneity during laser welding–brazing aluminum to titanium

(2011) Shuhai Chen et al.   MATERIALS & DESIGN

Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process

(2010) Shuhai Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Si diffusion behavior during laser welding-brazing of Al alloy and Ti alloy with Al-12Si filler wire

(2010) Shu-hai CHEN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Influence of interfacial reaction layer morphologies on crack initiation and propagation in Ti/Al joint by laser welding–brazing

(2009) Yanbin Chen et al.   MATERIALS & DESIGN

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications. Part II: Resistance to fatigue crack propagation and fracture

(2009) W. V. Vaidya et al.   MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK

Dual beam method for laser welding of galvanized steel: Experimentation and prospects

(2009) Salman Iqbal et al.   OPTICS AND LASER TECHNOLOGY