Synergistic Effects of MWCNTs and High-Pressure Torsion-Induced Grain Refinement on Microhardness, Tribological Properties, and Corrosion Behavior of Cu and Cu/MWCNT Nanocomposites

Fabrication of carbon nanotubes/Cu composites with orthotropic mechanical and tribological properties

(2021) Zhong Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Role of Carbon Nanotubes on Mechanical Properties of SiC-B4C-Ni Hybrid Composites Fabricated By Reactive Spark Plasma Sintering

(2021) Milad Bahamirian et al.   CERAMICS INTERNATIONAL

Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating

(2021) Jilin Xie et al.   Journal of Manufacturing Processes

Microstructure and mechanical properties of dissimilar NiTi/Ti6Al4V joints via back-heating assisted friction stir welding

(2021) Huaibo Deng et al.   Journal of Manufacturing Processes

Mechanochemical reactions of GaN-Al2O3 interface at the nanoasperity contact: Roles of crystallographic polarity and ambient humidity

(2021) Jian Guo et al.   Friction

Defect engineering of rutile TiO2 ceramics: Route to high voltage stability of colossal permittivity

(2021) Yang Yu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Facile Synthesis of Co9S8 Nanocages as an Electrochemical Sensor for Luteolin Detection

(2021) Hao Cheng et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Ultrathin Diamond Nanofilms—Development, Challenges, and Applications

(2021) Stephan Handschuh‐Wang et al.   Small

Facile Synthesis of Copper(I) Oxide Nanochains and the Photo-Thermal Conversion Performance of Its Nanofluids

(2021) Zhongjin Ni et al.   Coatings

Chemical environment and magnetic moment effects on point defect formations in CoCrNi-based concentrated solid-solution alloys

(2020) Huaqing Guan et al.   ACTA MATERIALIA

Microstructural, mechanical and thermal properties of microwave sintered Cu-MWCNT nanocomposites

(2020) Marjan Darabi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synergistic role of carbon nanotube and SiCn reinforcements on mechanical properties and corrosion behavior of Cu-based nanocomposite developed by flake powder metallurgy and spark plasma sintering process

(2020) M.R. Akbarpour et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Higher mechanical and thermal properties of Cu-rGO composites

(2020) Faisal Nazeer et al.   VACUUM

Effect of carbon fiber on the braking performance of copper-based brake pad under continuous high-energy braking conditions

(2020) Peng Zhang et al.   WEAR

Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell

(2020) H. Mousa Mirabad et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical, tribological and electrical properties of Cu-CNT composites fabricated by flake powder metallurgy method

(2019) M.R. Akbarpour et al.   Archives of Civil and Mechanical Engineering

Wear properties of copper and copper composites powders consolidated by high-pressure torsion

(2019) Mohamed Ibrahim Abd El Aal   Friction

Point defect model for the corrosion of steels in supercritical water: Part I, film growth kinetics

(2019) Yanhui Li et al.   CORROSION SCIENCE

Enhanced tensile properties and electrical conductivity of Cu-CNT nanocomposites processed via the combination of flake powder metallurgy and high pressure torsion methods

(2019) M.R. Akbarpour et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The significance of dispersion of nano-SiO2 on early age hydration of cement pastes

(2019) Pan Feng et al.   MATERIALS & DESIGN

Corrosion behaviour of cast and deformed copper-carbon nanotube composite wires in chloride media

(2018) Pyry-Mikko Hannula et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of CNTs content on the microstructures and properties of CNTs/Cu composite by microwave sintering

(2018) Bohua Duan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Wear and friction behavior of self-lubricating hybrid Cu-(SiC + x CNT) composites

(2018) M.R. Akbarpour et al.   COMPOSITES PART B-ENGINEERING

Microstructural and mechanical characteristics of hybrid SiC/Cu composites with nano- and micro-sized SiC particles

(2018) M.R. Akbarpour et al.   CERAMICS INTERNATIONAL

Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites

(2018) Faisal Nazeer et al.   COMPOSITES PART B-ENGINEERING

Investigation of Copper–Carbon Nanotube Composites as Global VLSI Interconnects

(2017) Zi-Han Cheng et al.   IEEE TRANSACTIONS ON NANOTECHNOLOGY

Mechanical properties and microstructure characterization of well-dispersed carbon nanotubes reinforced copper matrix composites

(2017) Hui Deng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Novel synthesizing and characterization of copper matrix composites reinforced with carbon nanotubes

(2017) Hu Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanoindentation and wear behaviour of copper based hybrid composites reinforced with SiC and MWCNTs synthesized by spark plasma sintering

(2017) H.M. Mallikarjuna et al.   VACUUM

Analysis of Load Transfer Mechanism in Cu Reinforced with Carbon Nanotubes Fabricated by Powder Metallurgy Route

(2016) Mohammad Reza Akbarpour   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu–CNT nanocomposite

(2015) M.R. Akbarpour et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hardness−strength relationships in fine and ultra-fine grained metals processed through constrained groove pressing

(2015) F. Khodabakhshi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication and material characterization of copper and copper–CNT micropillars

(2015) S Ghanbari et al.   Materials Research Express

Corrosion behaviour of stainless steel fibre-reinforced copper metal matrix composite with reference to electrochemical response of its constituents

(2014) Ashraf Bakkar et al.   CORROSION SCIENCE

A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites

(2013) S.J. Yoo et al.   CARBON

Effect of nanoparticle content on the microstructural and mechanical properties of nano-SiC dispersed bulk ultrafine-grained Cu matrix composites

(2013) M.R. Akbarpour et al.   MATERIALS & DESIGN

Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles

(2013) M.R. Akbarpour et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

One hundred fold increase in current carrying capacity in a carbon nanotube–copper composite

(2013) Chandramouli Subramaniam et al.   Nature Communications

Protecting copper from electrochemical degradation by graphene coating

(2012) R.K. Singh Raman et al.   CARBON

The tribological properties and mechanism of wear of Cu-based sintered powder materials containing molybdenum disulfide and molybdenum diselenite under unlubricated sliding against copper

(2012) A.M. Kovalchenko et al.   WEAR

Corrosion behaviour of multiwall carbon nanotube/magnesium composites in 3.5% NaCl

(2011) Metehan C. Turhan et al.   ELECTROCHIMICA ACTA

Microstructure and hardness of copper–carbon nanotube composites consolidated by High Pressure Torsion

(2011) P. Jenei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Investigation on wear mechanism of thermochemically fabricated W–Cu composites

(2010) M. Hashempour et al.   WEAR

Manufacturing and tribological properties of copper matrix/carbon nanotubes composites

(2010) C.B. Lin et al.   WEAR

Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process

(2009) Walid M. Daoush et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development and performance analysis of novel cast copper–SiC–Gr hybrid composites

(2008) C.S. Ramesh et al.   MATERIALS & DESIGN

The Role of Interfacial Oxygen Atoms in the Enhanced Mechanical Properties of Carbon-Nanotube-Reinforced Metal Matrix Nanocomposites

(2008) Kyung Tae Kim et al.   Small

Strengthening of copper matrix composites by nickel-coated single-walled carbon nanotube reinforcements

(2008) Chulju Kim et al.   SYNTHETIC METALS