A review of online condition monitoring and maintenance strategy for cylinder liner-piston rings of diesel engines

Nano Serpentine Powders as Lubricant Additive: Tribological Behaviors and Self-Repairing Performance on Worn Surface

(2020) Binbin Wang et al.   Nanomaterials

A review of recent advances in tribology

(2020) Yonggang Meng et al.   Friction

Intelligent prediction of engine failure through computational image analysis of wear particle

(2020) Suvendu Mohanty et al.   ENGINEERING FAILURE ANALYSIS

Algorithm development for acoustic emission measurement in high-frequency ranges and its application on a large two-stroke marine diesel engine

(2020) Xuan Thin Dong et al.   MEASUREMENT

Online oil debris monitoring of rotating machinery: A detailed review of more than three decades

(2020) Jiayi Sun et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Self-repairing properties of complex titanium grease containing hydroxyl silicate

(2019) Qu Jianjun et al.   TRIBOLOGY INTERNATIONAL

An Investigation into the Acoustic Emissions of Internal Combustion Engines with Modelling and Wavelet Package Analysis for Monitoring Lubrication Conditions

(2019) Nasha Wei et al.   Energies

Combustion parameters estimation based on multi-channel vibration acceleration signals

(2019) Xiuliang Zhao et al.   APPLIED THERMAL ENGINEERING

Automatic classification of severe and mild wear in worn surface images using histograms of oriented gradients as descriptor

(2019) C. Gonzalez-Arias et al.   WEAR

Integrated model of BP neural network and CNN algorithm for automatic wear debris classification

(2019) S. Wang et al.   WEAR

Effects of thread groove width in cylinder liner surface on performances of diesel engine

(2019) Xiang Rao et al.   WEAR

Predicting condition based on oil analysis – A case study

(2019) Hugo Raposo et al.   TRIBOLOGY INTERNATIONAL

Using acoustic emission to characterize friction and wear in dry sliding steel contacts

(2019) Zhe Geng et al.   TRIBOLOGY INTERNATIONAL

Online wear characterisation of rolling element bearing using wear particle morphological features

(2019) Yeping Peng et al.   WEAR

Numerical study of the self-excited thermoacoustic vibrations occurring in combustion system

(2019) Yuanhang Zhang et al.   APPLIED THERMAL ENGINEERING

Tribological solutions for engine piston ring surfaces: an overview on the materials and manufacturing

(2019) Rita Ferreira et al.   MATERIALS AND MANUFACTURING PROCESSES

The influence of different surface textures on wears in cylinder liner piston rings

(2019) Xiang Rao et al.   Surface Topography-Metrology and Properties

Ferrograph Analysis With Improved Particle Segmentation and Classification Methods

(2019) Shuo Wang et al.   JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING

Electrostatic induced charge signal extraction based on waveform characteristic in time domain

(2019) Chao Wang et al.   POWDER TECHNOLOGY

Friction modifiers effects on tribological behaviour of bainitic rail steels

(2019) Maha Messaadi et al.   TRIBOLOGY INTERNATIONAL

Phase-based time domain averaging (PTDA) for fault detection of a gearbox in an industrial robot using vibration signals

(2019) Yunhan Kim et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Model-based surface roughness estimation using acoustic emission signals

(2019) P. Feng et al.   TRIBOLOGY INTERNATIONAL

Mechanical wear debris feature, detection, and diagnosis: A review

(2018) Wei HONG et al.   Chinese Journal of Aeronautics

Short-time Fourier transform with the window size fixed in the frequency domain

(2018) Carlos Mateo et al.   DIGITAL SIGNAL PROCESSING

Combustion parameter estimation for ICE from surface vibration using frequency spectrum analysis

(2018) Shaobo Ji et al.   MEASUREMENT

Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques

(2018) S. Delvecchio et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A graphic pattern feature-mapping-based data-driven condition monitoring method for diesel engine malfunction identification and classification

(2018) Yiqing Li et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

A dilute-and-shoot sample preparation strategy for new and used lubricating oils for Ca, P, S and Zn determination by total reflection X-ray fluorescence

(2018) Mariana F.B. Mota et al.   SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY

Massing a laser-induced breakdown spectroscopy plasma with atomic absorption spectroscopy

(2018) Jonathan Merten et al.   SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY

Prediction of wear trend of engines via on-line wear debris monitoring

(2018) Wei Cao et al.   TRIBOLOGY INTERNATIONAL

Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles

(2018) Fatima Leonor Guzman Borda et al.   TRIBOLOGY INTERNATIONAL

A new statistical model for acoustic emission signals generated from sliding contact in machine elements

(2018) P. Borghesani et al.   TRIBOLOGY INTERNATIONAL

Behavior of acoustic emissions at the onset of sliding friction

(2018) Hiroo Taura et al.   TRIBOLOGY INTERNATIONAL

Bi-Gaussian stratified effect of rough surfaces on acoustic emission under a dry sliding friction

(2018) Songtao Hu et al.   TRIBOLOGY INTERNATIONAL

The tribological performances of modified magnesium silicate hydroxide as lubricant additive

(2018) Kai Gao et al.   TRIBOLOGY INTERNATIONAL

Tribological properties of attapulgite/La2O3 nanocomposite as lubricant additive for a steel/steel contact

(2018) Feng Nan et al.   RSC Advances

Insight into tribological problems of green ship and corresponding research progresses

(2018) Yuwei Sun et al.   Friction

Marine diesel engine failure simulator based on thermodynamic model

(2018) Jose Antonio Pagán Rubio et al.   APPLIED THERMAL ENGINEERING

Vibration Characteristics of Compression Ignition Engines Fueled with Blended Petro-Diesel and Fischer-Tropsch Diesel Fuel from Coal Fuels

(2018) Tiantian Yang et al.   Energies

Fault detection of injectors in diesel engines using vibration time-frequency analysis

(2018) Ahmad Taghizadeh-Alisaraei et al.   APPLIED ACOUSTICS

A signal processing framework for operational modal analysis in time and frequency domain

(2018) A. Brandt   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Restoration of low-informative image for robust debris shape measurement in on-line wear debris monitoring

(2018) Hongkun Wu et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Development of a novel knock characteristic detection method for gasoline engines based on wavelet-denoising and EMD decomposition

(2018) Fengrong Bi et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A review on lubricant condition monitoring information analysis for maintenance decision support

(2018) James M. Wakiru et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Real time identification of the internal combustion engine combustion parameters based on the vibration velocity signal

(2017) Xiuliang Zhao et al.   JOURNAL OF SOUND AND VIBRATION

A CWT-based methodology for piston slap experimental characterization

(2017) M. Buzzoni et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A history of cepstrum analysis and its application to mechanical problems

(2017) Robert B. Randall   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Acoustic emission characteristics of a single cylinder diesel generator at various loads and with a failing injector

(2017) Brian Dykas et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A comparison of cepstral editing methods as signal pre-processing techniques for vibration-based bearing fault detection

(2017) Cédric Peeters et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

The State of the Art of Hidden Markov Models for Predictive Maintenance of Diesel Engines

(2017) António Simões et al.   QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL

Modeling and experimental investigations on the relationship between wear debris concentration and wear rate in lubrication systems

(2017) Bin Fan et al.   TRIBOLOGY INTERNATIONAL

Lubricating oil conditioning sensors for online machine health monitoring – A review

(2017) Xiaoliang Zhu et al.   TRIBOLOGY INTERNATIONAL

Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with Biodiesel

(2017) Guoxing Li et al.   Applied Sciences-Basel

2D nanomaterials as lubricant additive: A review

(2017) Huaping Xiao et al.   MATERIALS & DESIGN

Wear Characterization by an On-Line Ferrograph Image

(2017) T H Wu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Piston scuffing fault and its identification in an IC engine by vibration analysis

(2016) Ashkan Moosavian et al.   APPLIED ACOUSTICS

Assessment and Prediction of Lubricant Oil Properties Using Infrared Spectroscopy and Advanced Predictive Analytics

(2016) Carolina T. Pinheiro et al.   ENERGY & FUELS

An oil monitoring method of wear evaluation for engine hot tests

(2016) Bin Fan et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Tribological performance of nanoparticles as lubricating oil additives

(2016) M. Gulzar et al.   JOURNAL OF NANOPARTICLE RESEARCH

Analysis of time-domain signals of piezoelectric strain sensors on slow spinning planetary gearboxes

(2016) Martin-Christopher Noll et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Shape classification of wear particles by image boundary analysis using machine learning algorithms

(2016) Wei Yuan et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signals

(2016) Jian Chen et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

The Vibration Monitoring Methods and Signal Processing Techniques for Structural Health Monitoring: A Review

(2015) D. Goyal et al.   ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING

In-cylinder pressure-based direct techniques and time frequency analysis for combustion diagnostics in IC engines

(2015) S. d’Ambrosio et al.   ENERGY CONVERSION AND MANAGEMENT

Fault diagnosis approach for rotating machinery based on dynamic model and computational intelligence

(2015) Junhong Zhang et al.   MEASUREMENT

Experimental modeling of Wiener filters estimated on an operating diesel engine

(2015) Julie Drouet et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Time domain cyclostationarity signal-processing tools

(2015) François Léonard   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Normalization and source separation of acoustic emission signals for condition monitoring and fault detection of multi-cylinder diesel engines

(2015) Weiliang Wu et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

On the identification of piston slap events in internal combustion engines using tribodynamic analysis

(2015) N. Dolatabadi et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Application of extraction induced by emulsion breaking for trace multi-element determination in jet fuel by inductively coupled plasma-mass spectrometry

(2015) Yang-Ming He et al.   SPECTROSCOPY LETTERS

Methyl oleate as matrix simulacrum for the simultaneous determination of metals in biodiesel samples by flame atomic emission spectroscopy

(2015) Conny Cerai Ferreira et al.   TALANTA

Advanced silicate-based lubricant additive induced diamond-like carbon structured restoration layer

(2015) Jing Zhang et al.   TRIBOLOGY INTERNATIONAL

Multisensor information integration for online wear condition monitoring of diesel engines

(2015) Wei Cao et al.   TRIBOLOGY INTERNATIONAL

Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles

(2015) M. Gulzar et al.   TRIBOLOGY INTERNATIONAL

Tribological behaviors and wear mechanisms of ultrafine magnesium aluminum silicate powders as lubricant additive

(2015) Feng Nan et al.   TRIBOLOGY INTERNATIONAL

Friction Modifier Additives

(2015) Hugh Spikes   TRIBOLOGY LETTERS

Prediction on wear of a spur gearbox by on-line wear debris concentration monitoring

(2015) Song Feng et al.   WEAR

Spur gear tooth root crack detection using time synchronous averaging under fluctuating speed

(2014) Nizar Ahamed et al.   MEASUREMENT

Measurement and analysis of instantaneous torque and angular velocity variations of a low speed two stroke diesel engine

(2014) Francisco J. Jiménez Espadafor et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Condition monitoring and fault diagnosis of diesel engines using instantaneous angular speed analysis

(2014) Tian R Lin et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Synthesis and characterization of rapeseed oil bio-lubricant dispersed with nano copper oxide: Its effect on wear and frictional behavior of piston ring–cylinder liner combination

(2014) S Arumugam et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

3D Surface Characterizations of Wear Particles Generated from Lubricated Regular Concave Cylinder Liners

(2014) Zhiwei Guo et al.   TRIBOLOGY LETTERS

Wear Condition Monitoring and Working Pattern Recognition of Piston Rings and Cylinder Liners Using On-Line Visual Ferrograph

(2014) Wei Cao et al.   TRIBOLOGY TRANSACTIONS

Imaged wear debris separation for on-line monitoring using gray level and integrated morphological features

(2014) Tonghai Wu et al.   WEAR

The segmentation of wear particles in ferrograph images based on an improved ant colony algorithm

(2014) Jingqiu Wang et al.   WEAR

Advancement and current status of wear debris analysis for machine condition monitoring: a review

(2013) Manoj Kumar et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

Application of power spectrum, cepstrum, higher order spectrum and neural network analyses for induction motor fault diagnosis

(2013) B. Liang et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

On-line Oil Monitoring and Diagnosis

(2013) José Salgueiro et al.   STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING

Application of the extraction induced by emulsion breaking for the determination of Cu, Fe and Mn in used lubricating oils by flame atomic absorption spectrometry

(2013) Luiz Fernando S. Caldas et al.   TALANTA

Watershed-Based Morphological Separation of Wear Debris Chains for On-Line Ferrograph Analysis

(2013) Hongkun Wu et al.   TRIBOLOGY LETTERS

A wear particle identification method by combining principal component analysis and grey relational analysis

(2013) Jingqiu Wang et al.   WEAR

Review of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals

(2013) Patricia Henriquez et al.   IEEE Transactions on Systems Man Cybernetics-Systems

Technology of self-repairing and reinforcement of metal worn surface

(2013) Yi Xu et al.   Advances in Manufacturing

Effect of instantaneous rotational speed on the analysis of measured diesel engine cylinder pressure data

(2012) Antonis K. Antonopoulos et al.   ENERGY CONVERSION AND MANAGEMENT

Non-destructive testing of marine diesel engines using integration of ferrographic analysis and spectrum analysis

(2012) Chenxing Sheng et al.   INSIGHT

Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives

(2012) Xiaoyun Song et al.   MATERIALS RESEARCH BULLETIN

A review on empirical mode decomposition in fault diagnosis of rotating machinery

(2012) Yaguo Lei et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Long-term surface restoration effect introduced by advanced silicate based lubricant additive

(2012) Jing Zhang et al.   TRIBOLOGY INTERNATIONAL

Tribological Effects of BN and MoS2 Nanoparticles Added to Polyalphaolefin Oil in Piston Skirt/Cylinder Liner Tests

(2012) Nicholaos G. Demas et al.   TRIBOLOGY LETTERS

Description of Wear Debris from On-Line Ferrograph Images by Their Statistical Color

(2012) Tonghai Wu et al.   TRIBOLOGY TRANSACTIONS

Cylinders diagnosis system of a 1MW internal combustion engine through vibrational signal processing using DWT technique

(2011) L. Barelli et al.   APPLIED ENERGY

An ant-inspired algorithm for detection of image edge features

(2011) S. Ali Etemad et al.   APPLIED SOFT COMPUTING

The synchronous (time domain) average revisited

(2011) S. Braun   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Effect of thermal activation on the tribological behaviours of serpentine ultrafine powders as an additive in liquid paraffin

(2011) H.L. Yu et al.   TRIBOLOGY INTERNATIONAL

Characterization and auto-restoration mechanism of nanoscale serpentine powder as lubricating oil additive under high temperature

(2011) Xiaowen Qi et al.   TRIBOLOGY INTERNATIONAL

An engine fault diagnosis system using intake manifold pressure signal and Wigner–Ville distribution technique

(2010) Jian-Da Wu et al.   EXPERT SYSTEMS WITH APPLICATIONS

Size effects of SiO2 nanoparticles as oil additives on tribology of lubricant

(2010) De‐Xing Peng et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

Current status of machine prognostics in condition-based maintenance: a review

(2010) Ying Peng et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Application of chemometrics and FTIR for determination of viscosity index and base number of motor oils

(2010) Mohammad Ahamd Al-Ghouti et al.   TALANTA

Study of the Regenerated Layer on the Worn Surface of a Cylinder Liner Lubricated by a Novel Silicate Additive in Lubricating Oil

(2010) Wen Yue et al.   TRIBOLOGY TRANSACTIONS

Engine Wear Monitoring with OLVF

(2010) Yali Zhang et al.   TRIBOLOGY TRANSACTIONS

Tribological behavior of copper nanoparticles as additives in oil

(2009) Y. Choi et al.   CURRENT APPLIED PHYSICS

Misfire identification in a four-stroke four-cylinder petrol engine using decision tree

(2009) S. Babu Devasenapati et al.   EXPERT SYSTEMS WITH APPLICATIONS

Real-time diagnostic system using acoustic emission for a cylinder liner in a large two-stroke diesel engine

(2009) Jang Kyu Kim et al.   International Journal of Precision Engineering and Manufacturing

EMD-based fault diagnosis for abnormal clearance between contacting components in a diesel engine

(2009) Yujun Li et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive

(2009) H.L. Yu et al.   TRIBOLOGY INTERNATIONAL

A New On-Line Visual Ferrograph

(2009) T. H. WU et al.   TRIBOLOGY TRANSACTIONS

Diagnosis of internal combustion engine through vibration and acoustic pressure non-intrusive measurements

(2008) L. Barelli et al.   APPLIED THERMAL ENGINEERING

Time-frequency analysis of single-point engine-block vibration measurements for multiple excitation-event identification

(2008) S. Vulli et al.   JOURNAL OF SOUND AND VIBRATION

Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant

(2008) He-long YU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Acoustic Emission and Its Relationship with Friction and Wear for Sliding Contact

(2008) H. S. Benabdallah et al.   TRIBOLOGY TRANSACTIONS

Interpretation of mechanical signals using an improved Hilbert–Huang transform

(2007) Wen-Xian Yang   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Time domain averaging across all scales: A novel method for detection of gearbox faults

(2007) Enayet B. Halim et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Automated classification of wear particles based on their surface texture and shape features

(2007) Gwidon P. Stachowiak et al.   TRIBOLOGY INTERNATIONAL

An in situ mechanism for self-replenishing powder transfer films: Experiments and modeling

(2007) C.F. Higgs et al.   WEAR