Nonlinear vibration analysis of coated blisks in the presence of stiffness mistuning identification

Modelling method and mistuning amplification analysis of the forced response for coated blisks in the presence of coatings-material nonlinearity

(2020) Xianfei Yan et al.   THIN-WALLED STRUCTURES

Dynamic model order reduction of blisks with nonlinear damping coatings using amplitude dependent mistuning

(2019) Mainak Mitra et al.   INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS

Effect of TGO on the tensile failure behavior of thermal barrier coatings

(2019) Le Wang et al.   Frontiers of Mechanical Engineering

Modeling method of coating thickness random mistuning and its effect on the forced response of coated blisks

(2019) Xianfei Yan et al.   AEROSPACE SCIENCE AND TECHNOLOGY

Forced vibration analysis of the hard-coating blisk considering the strain-dependent manner of the hard-coating damper

(2018) Feng Gao et al.   AEROSPACE SCIENCE AND TECHNOLOGY

Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade–disk

(2018) Haifeng Gao et al.   AEROSPACE SCIENCE AND TECHNOLOGY

An effective coating material solution and modeling technique for damping oriented design of thin walled mechanical components

(2018) Stefano Amadori et al.   COMPOSITE STRUCTURES

Analytical analysis of forced vibration of the hard-coating cylindrical shell with material nonlinearity and elastic constraint

(2018) Yue Zhang et al.   COMPOSITE STRUCTURES

Forced Response Analysis of a Mistuned Blisk Using Noncyclic Reduced-Order Models

(2018) Mauricio Gutierrez Salas et al.   JOURNAL OF PROPULSION AND POWER

Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors

(2018) Lukas Schwerdt et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Optimal design of the hard-coating blisk using nonlinear dynamic analysis and multi-objective genetic algorithm

(2018) Feng Gao et al.   COMPOSITE STRUCTURES

Nonlinear finite element modeling and vibration analysis of the blisk deposited strain-dependent hard coating

(2018) Feng Gao et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Forced Response Analysis of a Mistuned, Compressor Blisk Comparing Three Different Reduced Order Model Approaches

(2017) Mauricio Gutierrez Salas et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Models for blisks with large blends and small mistuning

(2017) Weihan Tang et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Efficient computational techniques for mistuning analysis of bladed discs: A review

(2017) Jie Yuan et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Multiobjective optimization of hard coating parameters designing for damping of the bladed disk

(2017) Yugang Chen et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING

Vibration Characteristics and Damping Analysis of the Blisk-Deposited Hard Coating Using the Rayleigh-Ritz Method

(2017) Feng Gao et al.   Coatings

Vibration and damping analysis of the bladed disk with damping hard coating on blades

(2016) Yugang Chen et al.   AEROSPACE SCIENCE AND TECHNOLOGY

Solution of natural characteristics of a hard-coating plate based on Lindstedt–Poincaré perturbation method and its valedictions by FEM and measurement

(2015) Z. X. Yang et al.   NONLINEAR DYNAMICS

Component-Mode Reduced-Order Models for Geometric Mistuning of Integrally Bladed Rotors

(2014) Joseph A. Beck et al.   AIAA JOURNAL

The vibration and buckling of sandwich cylindrical shells covered by different coatings subjected to the hydrostatic pressure

(2014) A.H. Sofiyev   COMPOSITE STRUCTURES

An Experimental Technique for the Evaluation of Strain Dependent Material Properties of Hard Coatings

(2014) Shad A. Reed et al.   SHOCK AND VIBRATION

Reduced Order Modeling of a Bladed Rotor With Geometric Mistuning Via Estimated Deviations in Mass and Stiffness Matrices

(2013) Yasharth Bhartiya et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

A component damping identification method for mistuned blisks

(2013) D.E. Holland et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Reduced-Order Modeling Approach for Blisks with Large Mass, Stiffness, and Geometric Mistuning

(2012) Andrew Madden et al.   AIAA JOURNAL

A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disks

(2011) P. Vargiu et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

A Reduced-Order Model of Detuned Cyclic Dynamical Systems With Geometric Modifications Using a Basis of Cyclic Modes

(2010) Moustapha Mbaye et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

A Methodology for Predicting the Response of Blades With Nonlinear Coatings

(2010) Sergio Filippi et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Management of the variability of vibration response levels in mistuned bladed discs using robust design concepts. Part 2

(2010) Y.-J. Chan et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Management of the variability of vibration response levels in mistuned bladed discs using robust design concepts. Part 1

(2010) Y.-J. Chan et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Asymptotic Description of Maximum Mistuning Amplification of Bladed Disk Forced Response

(2009) Carlos Martel et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Reduced-Order Model of a Bladed Rotor With Geometric Mistuning

(2009) Alok Sinha   JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME

Determination of mechanical properties of non-linear coatings from measurements with coated beams

(2008) Peter J. Torvik   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES