- Home
- Publications
- Publication Search
- Publication Details
Title
A review of the frictional contact in rock cutting with a PDC bit
Authors
Keywords
Rock cutting, Wear flat surface, Contact stress, Friction coefficient, Blunt PDC bit, Indentation test
Journal
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
Volume 208, Issue -, Pages 109665
Publisher
Elsevier BV
Online
2021-10-19
DOI
10.1016/j.petrol.2021.109665
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Rate Effect in Frictional Contact on Porous Rocks
- (2021) Yaneng Zhou et al. Rock Mechanics and Rock Engineering
- Numerical Modeling of Frictional Contact Between a Blunt Tool and Quasi-Brittle Rock
- (2019) George Z. Voyiadjis et al. ROCK MECHANICS AND ROCK ENGINEERING
- Experimental study of the force response and chip formation in rock cutting
- (2019) Weiji Liu et al. Arabian Journal of Geosciences
- Performance of polycrystalline diamond compact bit based on laboratory tests assuming geothermal well drilling
- (2019) Kuniyuki Miyazaki et al. GEOTHERMICS
- Study on integrated effect of PDC double cutters
- (2019) Pengju Chen et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Development of a Cutting Force Model for a Single PDC Cutter Based on the Rock Stress State
- (2019) Wei Li et al. ROCK MECHANICS AND ROCK ENGINEERING
- Experimental investigations on deformation of soft rock during cutting
- (2018) Shwetabh Yadav et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Estimation of rock strength using scratch test by a miniature disc cutter on rock cores or inside boreholes
- (2018) A. Naeimipour et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- An experimental study of the effect of back rake angle in rock cutting
- (2018) Iman Rostamsowlat et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Analysis of rock cutting process with a blunt PDC cutter under different wear flat inclination angles
- (2018) Iman Rostamsowlat et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Cutter layout optimization for reduction of lateral force on PDC bit using Kriging and particle swarm optimization methods
- (2018) Yachao Ma et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Investigation on bit stick-slip vibration with random friction coefficients
- (2018) Hongyuan Qiu et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Effect of Cutting Tool Properties and Depth of Cut in Rock Cutting: An Experimental Study
- (2018) Iman Rostamsowlat ROCK MECHANICS AND ROCK ENGINEERING
- Upper bound analytic mechanics model for rock cutting and its application in field testing
- (2018) Qi Wang et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Experimental investigation on the effect of wear flat inclination on the cutting response of a blunt tool in rock cutting
- (2018) Iman Rostamsowlat et al. Acta Geotechnica
- Influence of polycrystalline diamond compact bit geometric parameters on drilling performance during gas drainage borehole in soft coal seam
- (2018) Xiaoming Han et al. Advances in Mechanical Engineering
- Numerical and analytical study of rate effects on drilling forces under bottomhole pressure
- (2018) Mohamed Amri et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Imaging the formation process of cuttings: Characteristics of cuttings and mechanical specific energy in single PDC cutter tests
- (2018) Zhen Cheng et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- The improved rock breaking efficiency of an annular-groove PDC bit
- (2018) Huang Kuilin et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Evaluation of rock abrasiveness class based on the wear mechanisms of PDC cutters
- (2018) Changhao Wang et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Mechanical specific energy versus depth of cut in rock cutting and drilling
- (2017) Yaneng Zhou et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Investigation on random vibration of a drillstring
- (2017) Hongyuan Qiu et al. JOURNAL OF SOUND AND VIBRATION
- Simultaneous Identification of Rock Strength and Fracture Properties Via Scratch Test
- (2017) Xianqun He et al. ROCK MECHANICS AND ROCK ENGINEERING
- On the critical failure mode transition depth for rock cutting with different back rake angles
- (2017) Xianqun He et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Chipping and crushing mechanisms in orthogonal rock cutting
- (2016) Demeng Che et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Quality and wear behavior of graded polycrystalline diamond compact cutters
- (2016) M. Yahiaoui et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Influence of friction and rake angle on the formation of built-up edge during the rock cutting process
- (2016) Pradeep L. Menezes INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Rock cutting characteristics on soft-to-hard rocks under different cutter inclinations
- (2016) H. Munoz et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Independent analyses of cutting and friction forces applied on a single polycrystalline diamond compact cutter
- (2016) M. Yahiaoui et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Relative Significance of Multiple Parameters on the Mechanical Specific Energy and Frictional Responses of Polycrystalline Diamond Compact Cutters
- (2016) Babak Akbari et al. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME
- Chip Formation and Force Responses in Linear Rock Cutting: An Experimental Study
- (2016) Demeng Che et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- The investigation of rock indentation simulation based on discrete element method
- (2016) Xiaohua Zhu et al. KSCE Journal of Civil Engineering
- The effects of chamfer and back rake angle on PDC cutters friction
- (2016) Babak Akbari et al. Journal of Natural Gas Science and Engineering
- Rebuttal: Shallow wide groove scratch tests do not give fracture toughness
- (2015) Jeen-Shang Lin et al. ENGINEERING FRACTURE MECHANICS
- Micro-destructive cutting techniques for the characterization of natural limestone
- (2015) Magdalini Theodoridou et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Finite element modeling of rock cutting and its fragmentation process
- (2015) Maria C. Jaime et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- A review of drillstring vibration modeling and suppression methods
- (2015) Ahmad Ghasemloonia et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Modeling the ductile–brittle failure mode transition in rock cutting
- (2014) Yaneng Zhou et al. ENGINEERING FRACTURE MECHANICS
- Discussion: Strength-to-fracture scaling in scratching
- (2014) Ange-Therese Akono et al. ENGINEERING FRACTURE MECHANICS
- Experimental study of force responses in polycrystalline diamond face turning of rock
- (2014) Demeng Che et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- On the critical failure mode transition depth for rock cutting
- (2013) Yaneng Zhou et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- A study on PDC drill bits quality
- (2013) M. Yahiaoui et al. WEAR
- Rock strength determination from scratch tests
- (2012) Thomas Richard et al. ENGINEERING GEOLOGY
- Discrete element modeling of tool-rock interaction II: rock indentation
- (2012) Haiying Huang et al. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
- Discrete element modeling of tool-rock interaction I: rock cutting
- (2012) H. Huang et al. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
- Bit/rock interface laws in directional drilling
- (2012) Luc Perneder et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- On the correlation of scratch testing using separated elastoplastic and rigid plastic descriptions of the representative stress
- (2012) Per-Lennart Larsson MATERIALS & DESIGN
- Fracture and Fatigue of Polycrystalline-Diamond Compacts
- (2012) Kris Zacny SPE DRILLING & COMPLETION
- Scratch test model for the determination of fracture toughness
- (2010) Ange-Therese Akono et al. ENGINEERING FRACTURE MECHANICS
- Cutting Efficiency of a Single PDC Cutter on Hard Rock
- (2010) G. Hareland et al. JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY
- On scratch testing of pressure-sensitive polymeric coatings
- (2009) Fredrik Wredenberg et al. Journal of Coatings Technology and Research
- Drilling response of drag bits: Theory and experiment
- (2008) Emmanuel Detournay et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Scratch testing of metals and polymers: Experiments and numerics
- (2008) Fredrik Wredenberg et al. WEAR
- Intrinsic Length Scales in Tool-Rock Interaction
- (2008) Haiying Huang et al. International Journal of Geomechanics
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started