Performance Assessment of Graphene Oxide–Reinforced Sustainable Geopolymer Concrete

Effects of graphene oxide on microstructure and mechanical properties of graphene oxide-geopolymer composites

(2020) Xinhao Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of graphene oxide dosage on the deterioration properties of cement pastes exposed to an intense nitric acid environment

(2020) Murugan Muthu et al.   CONSTRUCTION AND BUILDING MATERIALS

Resistance of graphene oxide-modified cement pastes to hydrochloric acid attack

(2020) Murugan Muthu et al.   CONSTRUCTION AND BUILDING MATERIALS

Physicochemical properties of alkali activated GGBS and fly ash geopolymeric recycled concrete

(2019) Jianhe Xie et al.   CONSTRUCTION AND BUILDING MATERIALS

Impact of graphene oxide and highly reduced graphene oxide on cement based composites

(2019) Tanvir S. Qureshi et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative study of geopolymer and alkali activated slag concrete comprising waste foundry sand

(2019) Bavita Bhardwaj et al.   CONSTRUCTION AND BUILDING MATERIALS

Probability of failure of RCA concrete with ternary blended cements

(2019) Sumit Arora et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of graphene oxide on mechanical and durability performance of concrete

(2019) S.C. Devi et al.   Journal of Building Engineering

Influence of graphene oxide in a chemically activated fly ash

(2018) Gang Xu et al.   FUEL

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

Construction and demolition waste management in China through the 3R principle

(2018) Beijia Huang et al.   RESOURCES CONSERVATION AND RECYCLING

Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature

(2018) Mohammad Ali Yazdi et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate

(2018) Jianhe Xie et al.   COMPOSITES PART B-ENGINEERING

Properties of Cement Mortar and Ultra-High Strength Concrete Incorporating Graphene Oxide Nanosheets

(2017) Liulei Lu et al.   Nanomaterials

Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica

(2016) Partha Sarathi Deb et al.   CEMENT & CONCRETE COMPOSITES

The effect of high temperature on the design of blast furnace slag and coarse fly ash-based geopolymer mortar

(2016) Gökhan Kürklü   COMPOSITES PART B-ENGINEERING

Comparative effects of pristine and ball-milled graphene oxide on physico-chemical characteristics of cement mortar nanocomposites

(2016) Snigdha Sharma et al.   CONSTRUCTION AND BUILDING MATERIALS

Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash

(2016) Musaad Zaheer Nazir Khan et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials

(2016) Maria Criado et al.   Materials

Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature

(2015) Pradip Nath et al.   CEMENT & CONCRETE COMPOSITES

A mix design procedure for low calcium alkali activated fly ash-based concretes

(2015) M. Talha Junaid et al.   CONSTRUCTION AND BUILDING MATERIALS

Geopolymer concrete: A review of some recent developments

(2015) B. Singh et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

(2014) Pradip Nath et al.   CONSTRUCTION AND BUILDING MATERIALS

Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash

(2014) M. Albitar et al.   KSCE Journal of Civil Engineering

The mechanical properties of fly ash-based geopolymer concrete with alkaline activators

(2013) Gum Sung Ryu et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of iron making slags on strength and microstructure of fly ash geopolymer

(2012) S.K. Nath et al.   CONSTRUCTION AND BUILDING MATERIALS

Binding mechanism and properties of alkali-activated fly ash/slag mortars

(2012) Maochieh Chi et al.   CONSTRUCTION AND BUILDING MATERIALS

Design of self-compacting concrete with ground granulated blast furnace slag

(2012) P. Dinakar et al.   MATERIALS & DESIGN

New cements for the 21st century: The pursuit of an alternative to Portland cement

(2011) Caijun Shi et al.   CEMENT AND CONCRETE RESEARCH

NaOH-activated ground fly ash geopolymer cured at ambient temperature

(2011) Kiatsuda Somna et al.   FUEL

Technical and commercial progress in the adoption of geopolymer cement

(2011) Jannie S.J. Van Deventer et al.   MINERALS ENGINEERING

Utilization of waste foundry sand (WFS) in concrete manufacturing

(2011) Rafat Siddique et al.   RESOURCES CONSERVATION AND RECYCLING

Utilization of fly ash blends from pulverized coal and fluidized bed combustions in geopolymeric materials

(2010) Prinya Chindaprasirt et al.   CEMENT & CONCRETE COMPOSITES

A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements

(2010) Chao Li et al.   CEMENT AND CONCRETE RESEARCH

Graphene Oxide, Highly Reduced Graphene Oxide, and Graphene: Versatile Building Blocks for Carbon-Based Materials

(2010) Owen C. Compton et al.   Small

Effect of used-foundry sand on the mechanical properties of concrete

(2008) Rafat Siddique et al.   CONSTRUCTION AND BUILDING MATERIALS