Novel functional separator with self-assembled MnO2 layer via a simple and fast method in lithium-sulfur battery

Ge/Carbon Atomic‐Scale Hybrid Anode Material: A New‐Type Micro‐Nano Gradient Porous Structure with High Cycling Stability

(2021) Xiaodong Guo et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

(2021) Jie Zhu et al.   FUEL

Sulfur-Embedded FeS2 as a High-Performance Cathode for Room Temperature All-Solid-State Lithium–Sulfur Batteries

(2020) Jean Pierre Mwizerwa et al.   ACS Applied Materials & Interfaces

Sandwich‐like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

(2020) Rongrong Li et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

In-Situ Assembled VS4 as a Polysulfide Mediator for High-Loading Lithium–Sulfur Batteries

(2020) Liu Luo et al.   ACS Energy Letters

MnO2 supported on acrylic cloth as functional separator for high-performance lithium–sulfur batteries

(2020) Yinze Zuo et al.   JOURNAL OF POWER SOURCES

Dual-site lattice modification regulated cationic ordering for Ni-rich cathode towards boosted structural integrity and cycle stability

(2020) Chunliu Xu et al.   CHEMICAL ENGINEERING JOURNAL

Lithium/Oxygen Incorporation and Microstructural Evolution during Synthesis of Li-Rich Layered Li[Li0.2 Ni0.2 Mn0.6 ]O2 Oxides

(2019) Weibo Hua et al.   Advanced Energy Materials

MnO2-decorated graphene aerogel with dual-polymer interpenetrating network as an efficient hybrid host for Li-S batteries

(2019) Shunyuan Tan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In Situ Generated Li2S–C Nanocomposite for High-Capacity and Long-Life All-Solid-State Lithium Sulfur Batteries with Ultrahigh Areal Mass Loading

(2019) Hefeng Yan et al.   NANO LETTERS

Enhancing performance of Li–S batteries by coating separator with MnO @ yeast-derived carbon spheres

(2019) Guilin Feng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of layered membrane electrolytes with spin coating technique as anhydrous proton exchange membranes

(2019) Quantong Che et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

In situ-grown compressed NiCo2S4 barrier layer for efficient and durable polysulfide entrapment

(2019) Shaozhuan Huang et al.   NPG Asia Materials

A Dual‐Functional Conductive Framework Embedded with TiN‐VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li–S Full Batteries

(2019) Yu Yao et al.   ADVANCED MATERIALS

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

(2019) Yao Xiao et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Enhanced sodium storage property of sodium vanadium phosphate via simultaneous carbon coating and Nb5+ doping

(2019) Xiaohong Liu et al.   CHEMICAL ENGINEERING JOURNAL

Effective Dual Polysulfide Rejection by a Tannic Acid/FeIII Complex-Coated Separator in Lithium–Sulfur Batteries

(2018) Hong Zhang et al.   ACS Applied Materials & Interfaces

Spherical Macroporous Carbon Nanotube Particles with Ultrahigh Sulfur Loading for Lithium–Sulfur Battery Cathodes

(2018) Donghee Gueon et al.   ACS Nano

Ultrafine and polar ZrO 2 -inlaid porous nitrogen-doped carbon nanofiber as efficient polysulfide absorbent for high-performance lithium-sulfur batteries with long lifespan

(2018) Ya Li et al.   CHEMICAL ENGINEERING JOURNAL

Nanoconfined Oxidation Synthesis of N-Doped Carbon Hollow Spheres and MnO2 Encapsulated Sulfur Cathode for Superior Li-S Batteries

(2018) Jiadong Shen et al.   CHEMISTRY-A EUROPEAN JOURNAL

Polymeric multilayer-modified manganese dioxide with hollow porous structure as sulfur host for lithium sulfur batteries

(2018) Mengxue He et al.   ELECTROCHIMICA ACTA

Trapping polysulfides by chemical adsorption barrier of Li x La y TiO 3 for enhanced performance in lithium-sulfur batteries

(2018) Guilin Feng et al.   ELECTROCHIMICA ACTA

Vertical Co9S8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries

(2018) Jiarui He et al.   Energy & Environmental Science

Interfacing soluble polysulfides with a SnO 2 functionalized separator: An efficient approach for improving performance of Li-S battery

(2018) Yinyu Xiang et al.   JOURNAL OF MEMBRANE SCIENCE

Nano-TiO 2 decorated carbon coating on the separator to physically and chemically suppress the shuttle effect for lithium-sulfur battery

(2018) Hongyuan Shao et al.   JOURNAL OF POWER SOURCES

A Layered-Tunnel Intergrowth Structure for High-Performance Sodium-Ion Oxide Cathode

(2018) Yao Xiao et al.   Advanced Energy Materials

Exposing {010} Active Facets by Multiple-Layer Oriented Stacking Nanosheets for High-Performance Capacitive Sodium-Ion Oxide Cathode

(2018) Yao Xiao et al.   ADVANCED MATERIALS

α-MoO3 spheres as effective polysulfides adsorbent for high sulfur content cathode in lithium-sulfur batteries

(2018) Penghui Ji et al.   JOURNAL OF POWER SOURCES

Recessed Deposition of TiN into N-doped Carbon as a Cathode Host for Superior Li-S Batteries Performance

(2018) Zhenyu Xing et al.   Nano Energy

Manipulating Polysulfide Conversion with Strongly Coupled Fe3 O4 and Nitrogen Doped Carbon for Stable and High Capacity Lithium-Sulfur Batteries

(2018) Ke Lu et al.   ADVANCED FUNCTIONAL MATERIALS

Electrospun Ti4O7/C conductive nanofibers as interlayer for lithium-sulfur batteries with ultra long cycle life and high-rate capability

(2018) Ya Guo et al.   CHEMICAL ENGINEERING JOURNAL

A novel CuS/graphene-coated separator for suppressing the shuttle effect of lithium/sulfur batteries

(2018) Haipeng Li et al.   APPLIED SURFACE SCIENCE

Integrated Design of MnO2 @Carbon Hollow Nanoboxes to Synergistically Encapsulate Polysulfides for Empowering Lithium Sulfur Batteries

(2017) Sarish Rehman et al.   Small

A High-Efficiency Sulfur/Carbon Composite Based on 3D Graphene Nanosheet@Carbon Nanotube Matrix as Cathode for Lithium-Sulfur Battery

(2017) Ze Zhang et al.   Advanced Energy Materials

Freestanding carbon encapsulated mesoporous vanadium nitride nanowires enable highly stable sulfur cathodes for lithium-sulfur batteries

(2017) Xingxing Li et al.   Nano Energy

Designing high-energy lithium–sulfur batteries

(2016) Zhi Wei Seh et al.   CHEMICAL SOCIETY REVIEWS

Suppression of the polysulfide-shuttle behavior in Li–S batteries through the development of a facile functional group on the polypropylene separator

(2016) Xingwen Yu et al.   Materials Horizons

Li-ion battery materials: present and future

(2015) Naoki Nitta et al.   Materials Today

Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries

(2014) Zhiyong Zhang et al.   ELECTROCHIMICA ACTA

Lithium-Sulfur Batteries: Electrochemistry, Materials, and Prospects

(2013) Ya-Xia Yin et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries

(2013) Jia-Qi Huang et al.   Energy & Environmental Science

Challenges and Prospects of Lithium–Sulfur Batteries

(2012) Arumugam Manthiram et al.   ACCOUNTS OF CHEMICAL RESEARCH

A composite of sulfur and polypyrrole–multi walled carbon combinatorial nanotube as cathode for Li/S battery

(2012) Xiao Liang et al.   JOURNAL OF POWER SOURCES

Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries

(2011) Juchen Guo et al.   NANO LETTERS

Li–O2 and Li–S batteries with high energy storage

(2011) Peter G. Bruce et al.   NATURE MATERIALS

Electrical Energy Storage for the Grid: A Battery of Choices

(2011) B. Dunn et al.   SCIENCE

Advances in Li–S batteries

(2010) Xiulei Ji et al.   JOURNAL OF MATERIALS CHEMISTRY

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries

(2009) Xiulei Ji et al.   NATURE MATERIALS