Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure

Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys

(2021) Huiya Yang et al.   SCRIPTA MATERIALIA

Study about improving mechanism of electrical conductivity of AA1070Al treated by a novel composite boron treatment with trace Ti

(2021) Hui Ye et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy

(2020) Eli Vandersluis et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Influences of Fe, Mn and Y additions on microstructure and mechanical properties of hypoeutectic Al–7%Si alloy

(2020) Qinglin Li et al.   INTERMETALLICS

Effect of rare earth Y and Al–Ti–B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy

(2020) Wanwu Ding et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Alloy design strategies to increase strength and its trade-offs together

(2020) Seung Zeon Han et al.   PROGRESS IN MATERIALS SCIENCE

Effects of solution heat treatment time on the as-quenched microstructure, hardness and electrical conductivity of B319 aluminum alloy

(2020) Eli Vandersluis et al.   JOURNAL OF ALLOYS AND COMPOUNDS

An investigation on primary Si refinement by Sr and Sb additions in a hypereutectic Al-Si alloy

(2020) Reza Haghayeghi et al.   MATERIALS LETTERS

Effect of Modification with Different Contents of Sb and Sr on the Thermal Conductivity of Hypoeutectic Al-Si Alloy

(2020) Jin Guo et al.   Metals

Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy

(2019) Shengwei Yuan et al.   JOURNAL OF MATERIALS SCIENCE

The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment

(2019) Xiaoli Cui et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions of different cooling rates

(2019) Guoling Mao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synchronous improvement of electrical and mechanical performance of A356 alloy reinforced by boron coupling nano-AlNp

(2019) Mengjie Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The improvement of boron treatment efficiency and electrical conductivity of AA1070Al achieved by trace Ti assistant

(2018) Xiaoli Cui et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of hot extrusion and subsequent T6 treatment on the microstructure evolution and tensile properties of an Al-6Si-2Cu-0.5Mg alloy

(2018) Cong Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of deformation and annealing on electrical conductivity, mechanical properties and texture of Al-Mg-Si alloy cables

(2018) Jiayi Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influences of different Zr additions on the microstructure, room and high temperature mechanical properties of an Al-7Si-0.4Mg alloy modified with 0.25%Er

(2018) Marco Colombo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Breaking the trade-off relation of strength and electrical conductivity in pure Al wire by controlling texture and grain boundary

(2018) J.P. Hou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Three principles for preparing Al wire with high strength and high electrical conductivity

(2018) J.P. Hou et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

The effect of Sr on the microstructure and wear properties of AlSi5Cu1Mg alloy

(2018) Jianbin Zhu et al.   Advances in Mechanical Engineering

Effects of casting and heat treatment processes on the thermal conductivity of an Al-Si-Cu-Fe-Zn alloy

(2017) J.K. Chen et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Comparison of Si Refinement Efficiency of Electromagnetic Stirring and Ultrasonic Treatment for a Hypereutectic Al-Si Alloy

(2017) Reza Haghayeghi et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Effect of Al-5Ti-0.62C-0.2Ce Master Alloy on the Microstructure and Tensile Properties of Commercial Pure Al and Hypoeutectic Al-8Si Alloy

(2017) Wanwu Ding et al.   Metals

Synergistic effect of Sr and La on the microstructure and mechanical properties of A356.2 alloy

(2017) Chuanrong Qiu et al.   MATERIALS & DESIGN

Precipitation phenomena in ultrafine grained Al–Mg–Si alloy with heterogeneous microstructure

(2016) Witold Chrominski et al.   ACTA MATERIALIA

Influences of Fe, Si and homogenization on electrical conductivity and mechanical properties of dilute Al–Mg–Si alloy

(2016) Qingru Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al–Mg–Si alloys

(2015) X. Sauvage et al.   ACTA MATERIALIA

Modification of eutectic Si in Al–Si alloys with Eu addition

(2015) J.H. Li et al.   ACTA MATERIALIA

Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum

(2015) Xiaoli Cui et al.   MATERIALS & DESIGN

Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice

(2014) Abdul Khaliq et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Optimization of homogenization for a low alloyed AlMgSi alloy

(2013) Yucel Birol   MATERIALS CHARACTERIZATION

Removal of Vanadium from Molten Aluminum—Part II. Kinetic Analysis and Mechanism of VB2 Formation

(2013) Abdul Khaliq et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Removal of Vanadium from Molten Aluminum-Part I. Analysis of VB2 Formation

(2013) Abdul Khaliq et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Solid-solution copper alloys with high strength and high electrical conductivity

(2013) Kazunari Maki et al.   SCRIPTA MATERIALIA

Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

(2012) J. H. Li et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A new method for determining dynamic grain structure evolution during hot aluminum extrusion

(2011) A. Güzel et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The effect of extrusion speed on the structure and corrosion properties of aged and non-aged 6063 aluminum alloy

(2011) A. Aytaç et al.   MATERIALS CHEMISTRY AND PHYSICS

Microstructure and mechanical properties of rheo-diecasted A390 alloy

(2010) Jun-wen ZHAO et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

(2009) K. Lu et al.   SCIENCE

Effect of the extrusion conditions on microstructure evolution of the extruded Al–Mg–Si–Cu alloy rods

(2008) Shinobu Kaneko et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Thermal characteristics of heat-treated aluminum high-pressure die-castings

(2008) R.N. Lumley et al.   SCRIPTA MATERIALIA

Effect of Mg and Sr-modification on the mechanical properties of 319-type aluminum cast alloys subjected to artificial aging

(2007) F.J. Tavitas-Medrano et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING