Hierarchical microstructure and strengthening mechanism of Cu-36.8Fe alloy manufactured by selective laser melting

Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe Alloy

(2021) Dawei Yuan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting

(2021) A. Zafari et al.   Materials Research Letters

TiB2- and Fe2P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior

(2021) Min Xie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and dislocation evolution of Cu–Fe interfaces from molecular dynamics simulation

(2021) Y.J. Shen et al.   MATERIALS CHEMISTRY AND PHYSICS

Hierarchical structure in Al-Cu alloys to promote strength/ductility synergy

(2021) S.H. Wu et al.   SCRIPTA MATERIALIA

Atomic scale insights into the rapid crystallization and precipitation behaviors in FeCu binary alloys

(2021) Haodong Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Research progress on selective laser melting (SLM) of magnesium alloys: A review

(2020) Wan-neng Zhang et al.   OPTIK

Effect of W content on the microstructure and properties of Cu-Fe alloy

(2020) Boxue Song et al.   Journal of Materials Research and Technology-JMR&T

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

(2020) Ruidi Li et al.   ACTA MATERIALIA

Pure copper components fabricated by cold spray (CS) and selective laser melting (SLM) technology

(2020) Jian Huang et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure and Strengthening Model of Cu–Fe In-Situ Composites

(2020) Keming Liu et al.   Materials

In-situ synthesis via laser metal deposition of a lean Cu–3.4Cr–0.6Nb (at%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles

(2020) Anoop R Kini et al.   ACTA MATERIALIA

Hierarchical microstructures and deformation behavior of laser direct-metal-deposited Cu–Fe alloys

(2020) Arya Chatterjee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling

(2020) Meng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements

(2019) Yeon Beom Jeong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase field study of the copper precipitation in Fe-Cu alloy

(2019) Jiaming Zhu et al.   ACTA MATERIALIA

Microstructure and properties of CuCr alloy manufactured by selective laser melting

(2019) Yuhong Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and properties of Cu–Fe deformation processed in-situ composite

(2019) Jin Zou et al.   VACUUM

A comparative study on the nanoindentation behavior, wear resistance and in vitro biocompatibility of SLM manufactured CP–Ti and EBM manufactured Ti64 gyroid scaffolds

(2019) Arash Ataee et al.   Acta Biomaterialia

Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting

(2019) Hongyu Wu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting

(2019) Sohei Uchida et al.   MATERIALS & DESIGN

High-resolution Transmission Electron Microscopy Characterization of the Structure of Cu Precipitate in a Thermal-aged Multicomponent Steel

(2019) Lizhan Han et al.   Chinese Journal of Mechanical Engineering

Effects of Stress on Martensite Transformation During Continuous Cooling and Mechanical Response of a Medium-Carbon High-Strength Steel

(2019) Man Liu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Combined Fe and O effects on microstructural evolution and strengthening in Cu–Fe nanocrystalline alloys

(2019) Jinming Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution during temperature gradient zone melting: Cellular automaton simulation and experiment

(2018) Qingyu Zhang et al.   COMPUTATIONAL MATERIALS SCIENCE

Processing optimisation, mechanical properties and microstructural evolution during selective laser melting of Cu-15Sn high-tin bronze

(2018) Zhongfa Mao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development of a new class of high strength copper alloy using immiscibility route in Cu-Fe-Si system: Evolution of hierarchical multi-scale microstructure

(2018) Suman Sarkar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy

(2018) Shichao Liu et al.   MATERIALS & DESIGN

A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

(2018) Jinliang Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of Building Direction on the Oxidation Behavior of Inconel 718 Alloy Fabricated by Additive Manufacture of Electron Beam Melting

(2018) Lv Li et al.   Materials

Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys

(2018) Jinming Guo et al.   ACTA MATERIALIA

Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

(2017) E. Liverani et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Study of microstructure evolution and properties of Cu-Fe microcomposites produced by a pre-alloyed powder method

(2017) Fenglin Wang et al.   MATERIALS & DESIGN

Evolution of crystal structure of Cu precipitates in a low carbon steel

(2017) G. Han et al.   MATERIALS & DESIGN

Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs

(2015) Swee Leong Sing et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Thermal Stability and Properties of Deformation-Processed Cu-Fe In Situ Composites

(2015) Keming Liu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

(2014) M. Simonelli et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Extraordinary strain hardening by gradient structure

(2014) X. Wu et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys

(2013) Y.R. Wen et al.   ACTA MATERIALIA

Effect of external loading on the martensitic transformation – A phase field study

(2013) Amer Malik et al.   ACTA MATERIALIA

Molecular Dynamics virtual testing of thermally aged Fe–Cu microstructures obtained from multiscale simulations

(2013) David Molnar et al.   COMPUTATIONAL MATERIALS SCIENCE

Experimental Investigation of Phase Equilibria in the Cu-Fe-Zr Ternary System

(2013) W. L. Huang et al.   JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION

Low-Temperature Criticality of Martensitic Transformations of Cu Nanoprecipitates inα-Fe

(2013) Paul Erhart et al.   PHYSICAL REVIEW LETTERS

Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic Monte Carlo, molecular dynamics and phase-field simulations

(2012) David Molnar et al.   ACTA MATERIALIA

Phase transformation of Cu precipitates from bcc to fcc in Fe–3Si–2Cu alloy

(2012) Y.-U. Heo et al.   ACTA MATERIALIA

Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder

(2012) Lore Thijs et al.   ACTA MATERIALIA

Effects of solidification rate and temperature gradient on microstructure and crystal orientation of Co32Ni40Al28 alloys

(2011) Junzheng Li et al.   MATERIALS LETTERS

Effects of thermo-mechanical processing and trace amount of carbon addition on tensile properties of Cu–2.5Fe–0.1P alloys

(2009) Eunha Jeong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of coherency on coarsening of second-phase precipitates in Cu-base alloys

(2008) Daizen Watanabe et al.   JOURNAL OF MATERIALS SCIENCE