Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Mechanical behavior of high-entropy alloys

(2021) Weidong Li et al.   PROGRESS IN MATERIALS SCIENCE

Designing L21-strengthened Al-Cr-Fe-Ni-Ti complex concentrated alloys for high temperature applications

(2021) Woo Chul Kim et al.   ACTA MATERIALIA

Deformation mechanisms and texture evolution in high entropy alloy during cold rolling

(2021) Lalit Kaushik et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

(2021) Wujing Fu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Gradient-cell–structured high-entropy alloy with exceptional strength and ductility

(2021) Qingsong Pan et al.   SCIENCE

Stacking fault energy in concentrated alloys

(2021) Mulaine Shih et al.   Nature Communications

Microstructure Evaluation Study of Al5083 Alloy Using EBSD Technique after Processing with Different ECAP Processes and Temperatures

(2021) Muneer Baig et al.   Crystals

Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications

(2021) D.D. Zhang et al.   ACTA MATERIALIA

Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates

(2021) Y.L. Zhao et al.   ACTA MATERIALIA

Superior High‐Temperature Strength in a Supersaturated Refractory High‐Entropy Alloy

(2021) Rui Feng et al.   ADVANCED MATERIALS

Ordered structure and solute-suppressed atomic ordering in iron-cobalt alloys

(2021) Yalin Li et al.   COMPUTATIONAL MATERIALS SCIENCE

Shear punching of a Co20Cr20Fe20Ni20Mn15Cu5 high entropy alloy

(2021) Keyan Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Plasticity-induced stacking fault behaviors of γ’ precipitates in novel CoNi-based superalloys

(2021) W.-W. Xu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy

(2020) Fukai Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy

(2020) Sijing Chen et al.   Nature Communications

Dislocation-particle interactions in magnesium alloys

(2020) C.Y. Wang et al.   ACTA MATERIALIA

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

(2020) X. H. Du et al.   Nature Communications

Clustering, nano-scale precipitation and strengthening of steels

(2020) Zhiping Xiong et al.   PROGRESS IN MATERIALS SCIENCE

Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures

(2020) Lei Fan et al.   Nature Communications

The influence of alloying on the stacking fault energy of gold from density functional theory calculations

(2020) Anuj Goyal et al.   COMPUTATIONAL MATERIALS SCIENCE

Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae

(2019) Peijian Shi et al.   Nature Communications

Design of D022 superlattice with superior strengthening effect in high entropy alloys

(2019) Feng He et al.   ACTA MATERIALIA

Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy

(2019) T. Yang et al.   SCRIPTA MATERIALIA

Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys

(2019) Daixiu Wei et al.   SCRIPTA MATERIALIA

Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures

(2019) M.N. Hasan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

High-entropy alloys

(2019) Easo P. George et al.   Nature Reviews Materials

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

(2019) T.W. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy

(2019) Jian Peng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation behavior and its impact on mechanical properties in an aged carbon-containing Al0.3Cu0.5CrFeNi2 high-entropy alloy

(2019) Kai Zhang et al.   MATERIALS CHARACTERIZATION

Tuning element distribution, structure and properties by composition in high-entropy alloys

(2019) Qingqing Ding et al.   NATURE

Combined effect of nanoparticle and grain refinement on yield stress of nanocomposite

(2019) Yingxin Zhao   PHILOSOPHICAL MAGAZINE

Study of the plastic deformation mechanism of TRIP–TWIP high entropy alloys at the atomic level

(2019) Mehran Bahramyan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Tungsten solubility in L12-ordered Al3Er and Al3Zr nanoprecipitates formed by aging in an aluminum matrix

(2019) Amir R. Farkoosh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy

(2018) B.B. Zhang et al.   ACTA MATERIALIA

Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites

(2018) Z.Y. Ding et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Experimental determination of latent hardening coefficients in FeMnNiCoCr

(2018) Y. Wu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Composition evolution of gamma prime nanoparticles in the Ti-doped CoFeCrNi high entropy alloy

(2018) Bin Han et al.   SCRIPTA MATERIALIA

Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel

(2018) S.S. Xu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

(2018) Yao-Jian Liang et al.   Nature Communications

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

(2018) Zhifeng Lei et al.   NATURE

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

(2018) Zezhou Li et al.   PROGRESS IN MATERIALS SCIENCE

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

(2018) T. Yang et al.   SCIENCE

Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure

(2018) S.W. Wu et al.   ACTA MATERIALIA

Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films

(2017) X.B. Feng et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Mechanical properties of the CoCrFeNiMnV x high entropy alloys in temperature range 4.2–300 K

(2017) Е.D. Tabachnikova et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High-temperature plastic flow of a precipitation-hardened FeCoNiCr high entropy alloy

(2017) J.Y. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Intrinsic properties and strengthening mechanism of monocrystalline Ni-containing ternary concentrated solid solutions

(2017) K. Jin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

(2017) Suihe Jiang et al.   NATURE

High dislocation density–induced large ductility in deformed and partitioned steels

(2017) B. B. He et al.   SCIENCE

Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys

(2017) M. Beyramali Kivy et al.   SCRIPTA MATERIALIA

Effects of nanotwins on the mechanical properties of Al x CoCrFeNi high entropy alloy thin films

(2017) X.B. Feng et al.   SCRIPTA MATERIALIA

The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys

(2017) Y.H. Zhang et al.   SCRIPTA MATERIALIA

Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy

(2017) Jaimyun Jung et al.   npj Computational Materials

Effect of lattice misfit on the evolution of the dislocation structure in Ni-based single crystal superalloys during thermal exposure

(2016) Haibo Long et al.   ACTA MATERIALIA

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

(2016) Zhiming Li et al.   NATURE

Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles

(2015) Z.B. Jiao et al.   ACTA MATERIALIA

Mechanical responses and deformation mechanisms of an AZ31 Mg alloy sheet under dynamic and simple shear deformations

(2015) Amit Pandey et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Brittle intermetallic compound makes ultrastrong low-density steel with large ductility

(2015) Sang-Heon Kim et al.   NATURE

The Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies

(2015) Scott Kirklin et al.   npj Computational Materials

Dislocation glide in Fe–carbon solid solution: From atomistic to continuum level description

(2014) H.A. Khater et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Ostwald ripening in multicomponent alloys

(2013) T. Philippe et al.   ACTA MATERIALIA

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy

(2013) Yuichiro Koizumi et al.   ACTA MATERIALIA

Precipitate strengthening in nanostructured metallic material composites

(2012) N. Abdolrahim et al.   PHILOSOPHICAL MAGAZINE LETTERS

Coarsening resistance at 400°C of precipitation-strengthened Al–Zr–Sc–Er alloys

(2011) Christopher Booth-Morrison et al.   ACTA MATERIALIA

Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging

(2011) I. Gutierrez-Urrutia et al.   ACTA MATERIALIA

The conflicts between strength and toughness

(2011) Robert O. Ritchie   NATURE MATERIALS

Effect of vanadium on atomic ordering characteristics and anti-phase boundary energies of B2–FeCo alloys

(2010) Muratahan Aykol et al.   INTERMETALLICS

Strong Strain Hardening in Nanocrystalline Nickel

(2009) X. L. Wu et al.   PHYSICAL REVIEW LETTERS