Temperature-dependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

(2021) Feng He et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy

(2021) A.K. Chandan et al.   SCRIPTA MATERIALIA

Stacking fault energy in concentrated alloys

(2021) Mulaine Shih et al.   Nature Communications

Unusual dislocation behavior in high-entropy alloys

(2020) Evan Ma   SCRIPTA MATERIALIA

Plastic strain-induced sequential martensitic transformation

(2020) Shaolou Wei et al.   SCRIPTA MATERIALIA

Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase

(2019) Yeqiang Bu et al.   PHYSICAL REVIEW LETTERS

Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy

(2019) Jing Su et al.   ACTA MATERIALIA

Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures

(2019) Z.F. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A promising CoFeNi2V0.5Mo0.2 high entropy alloy with exceptional ductility

(2019) L. Jiang et al.   SCRIPTA MATERIALIA

High-entropy alloys

(2019) Easo P. George et al.   Nature Reviews Materials

Work Hardening Behavior of Fe40Mn40Cr10Co10 High Entropy Alloy Single Crystals Deformed by Twinning and Slip

(2019) S. Picak et al.   ACTA MATERIALIA

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

(2019) T.W. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy

(2019) M. Schneider et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature

(2019) A. K. Chandan et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

(2019) E.P. George et al.   ACTA MATERIALIA

Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al 0.1 CoCrFeNi

(2018) X.D. Xu et al.   ACTA MATERIALIA

Stacking fault energy of face-centered-cubic high entropy alloys

(2018) S.F. Liu et al.   INTERMETALLICS

Realizing strength-ductility combination of coarse-grained Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 alloy via nano-sized, coherent precipitates

(2018) Kaisheng Ming et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Investigation of plastic deformation modes in Al 0.1 CoCrFeNi high entropy alloy

(2018) D. Choudhuri et al.   MATERIALS CHEMISTRY AND PHYSICS

Twinning in metastable high-entropy alloys

(2018) Shuo Huang et al.   Nature Communications

Bidirectional Transformation Enables Hierarchical Nanolaminate Dual-Phase High-Entropy Alloys

(2018) Wenjun Lu et al.   ADVANCED MATERIALS

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

(2018) T. Yang et al.   SCIENCE

Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures

(2018) Kaisheng Ming et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure

(2018) S.W. Wu et al.   ACTA MATERIALIA

Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties

(2017) Zhiming Li et al.   JOM

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

(2017) S.-H. Joo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Remarkable strength of CoCrFeNi high-entropy alloy wires at cryogenic and elevated temperatures

(2017) Wenyi Huo et al.   SCRIPTA MATERIALIA

A crystal plasticity model for twinning- and transformation-induced plasticity

(2016) Su Leen Wong et al.   ACTA MATERIALIA

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

Dislocation transmutation by tension twinning in magnesium alloy AZ31

(2016) Fulin Wang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Orientation dependence of the deformation kink band formation behavior in Zn single crystal

(2016) Koji Hagihara et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel

(2016) Jin-Kyung Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

(2016) Zhiming Li et al.   NATURE

Design of a twinning-induced plasticity high entropy alloy

(2015) Y. Deng et al.   ACTA MATERIALIA

Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys

(2015) Duancheng Ma et al.   ACTA MATERIALIA

On the room temperature deformation mechanisms of a Mg–Y–Zn alloy with long-period-stacking-ordered structures

(2015) Jin-Kyung Kim et al.   ACTA MATERIALIA

Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design

(2015) K.G. Pradeep et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy

(2015) Shuo Huang et al.   SCRIPTA MATERIALIA

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

(2013) A. J. Zaddach et al.   JOM

Application of a Dislocation Density-Based Constitutive Model to Al-Alloyed TWIP Steel

(2013) Jinkyung Kim et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels

(2013) H.K. Yang et al.   SCRIPTA MATERIALIA

A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility

(2013) M.J. Yao et al.   SCRIPTA MATERIALIA

Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel

(2012) I. Gutierrez-Urrutia et al.   ACTA MATERIALIA

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

(2012) David R. Steinmetz et al.   ACTA MATERIALIA

Universal strain–temperature dependence of dislocation structure evolution in face-centered-cubic metals

(2011) P. Landau et al.   ACTA MATERIALIA

Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging

(2011) I. Gutierrez-Urrutia et al.   ACTA MATERIALIA

On the mechanism of twin formation in Fe–Mn–C TWIP steels

(2010) H. Idrissi et al.   ACTA MATERIALIA

Lattice correspondence during twinning in hexagonal close-packed crystals

(2010) M. Niewczas   ACTA MATERIALIA

On the relationship between the twin internal structure and the work-hardening rate of TWIP steels

(2010) H. Idrissi et al.   SCRIPTA MATERIALIA

A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects

(2009) H. El Kadiri et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Effect of stacking-fault energy on deformation twin thickness in Cu–Al alloys

(2008) Y. Zhang et al.   SCRIPTA MATERIALIA

Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels

(2007) O. Bouaziz et al.   SCRIPTA MATERIALIA