A CFD study of particle deposition in three-dimensional heat exchange channel based on an improved deposition model

Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle

(2021) Anusorn Chinsuwan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Improving the efficiency of an exhaust thermoelectric generator based on changes in the baffle distribution of the heat exchanger

(2020) Roozbeh Sheikh et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Heat transfer and ash deposition performance of heat exchange surface in waste incineration flue gas

(2020) Yidan Zhang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical investigation of nanoparticle deposition location and pattern on a sharp-bent tube wall

(2020) Dong-Bin Kwak et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermal Assessment of Nano-Particulate Graphene-Water/Ethylene Glycol (WEG 60:40) Nano-Suspension in a Compact Heat Exchanger

(2019) M. M. Sarafraz et al.   Energies

Perturbation threshold and hysteresis associated with the transition to turbulence in sudden expansion pipe flow

(2019) Minh Quan Nguyen et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW

The deposition characteristics of micron particles in heat exchange pipelines

(2019) Zhimin Han et al.   APPLIED THERMAL ENGINEERING

A parallel high-order compressible flows solver with domain decomposition method in the generalized curvilinear coordinates system

(2019) Arthur Piquet et al.   INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW

Forced convection in a double tube heat exchanger using nanofluids with constant and variable thermophysical properties

(2019) Mohammad Hussein Bahmani et al.   INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW

Heat transfer analysis of Ga-In-Sn in a compact heat exchanger equipped with straight micro-passages

(2019) M.M. Sarafraz et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Turbulent flows in a spiral double-pipe heat exchanger

(2019) Zhe Tian et al.   INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW

Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD

(2019) Turo Välikangas et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer evaluation of a micro heat exchanger cooling with spherical carbon-acetone nanofluid

(2019) Z.X. Li et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental and numerical investigation on particulate fouling characteristics of vortex generators with a hole

(2019) Zhimin Han et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical study on the influence of fine particle deposition characteristics on wall roughness

(2019) Wenpeng Hong et al.   POWDER TECHNOLOGY

Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger

(2018) Mohammad Hussein Bahmani et al.   ADVANCED POWDER TECHNOLOGY

Influence of wet-particle deposition on air-side heat transfer and pressure drop of fin-and-tube heat exchangers

(2018) Feilong Zhan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Fouling characteristics analysis and morphology prediction of heat exchangers with a particulate fouling model considering deposition and removal mechanisms

(2017) Song-Zhen Tang et al.   FUEL

Real-time fouling characteristics of a typical heat exchanger used in the waste heat recovery systems

(2017) Fei-Long Wang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical simulation of particle deposition in duct air flows with uniform, expanding or contracting cross-section

(2016) Hao Lu et al.   ENERGY AND BUILDINGS

Investigation of heat transfer performance and friction factor of a counter-flow double-pipe heat exchanger using nitrogen-doped, graphene-based nanofluids

(2016) Marjan Goodarzi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Numerical model of particle deposition on fin surface of heat exchanger

(2016) Feilong Zhan et al.   INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID

Effects of rib spacing and height on particle deposition in ribbed duct air flows

(2015) Hao Lu et al.   BUILDING AND ENVIRONMENT

Numerical investigation on particle deposition enhancement in duct air flow by ribbed wall

(2015) Hao Lu et al.   BUILDING AND ENVIRONMENT

Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids

(2015) Marjan Goodarzi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Statistical behavior of supersonic turbulent boundary layers with heat transfer at M∞=2

(2015) M.S. Shadloo et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW

A parameter study of tube bundle heat exchangers for fouling rate reduction

(2014) Hui Han et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical simulation of multilayer deposition in an obstructed channel flow

(2013) Gregory Lecrivain et al.   ADVANCED POWDER TECHNOLOGY

Experimental investigation of multilayer particle deposition and resuspension between periodic steps in turbulent flows

(2013) T. Barth et al.   JOURNAL OF AEROSOL SCIENCE

Numerical study of heat-transfer enhancement by punched winglet-type vortex generator arrays in fin-and-tube heat exchangers

(2012) Y.L. He et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Using RANS turbulence models and Lagrangian approach to predict particle deposition in turbulent channel flows

(2011) Naiping Gao et al.   BUILDING AND ENVIRONMENT

Simulation of particle deposition in ventilation duct with a particle–wall impact model

(2009) Hai Jiang et al.   BUILDING AND ENVIRONMENT

Prediction of particle deposition onto indoor surfaces by CFD with a modified Lagrangian method

(2008) Z. Zhang et al.   ATMOSPHERIC ENVIRONMENT