Optimization of the microstructure and mechanical properties of electron beam welded high-strength medium-entropy alloy (NiCoCr)94Al3Ti3

Welding of high-entropy alloys and compositionally complex alloys—an overview

(2021) Michael Rhode et al.   Welding in the World

A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ′-solvus temperature and superior high-temperature strength

(2021) B.X. Cao et al.   SCRIPTA MATERIALIA

Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition

(2021) Xueling Huang et al.   SCRIPTA MATERIALIA

Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

(2021) J.P. Oliveira et al.   SCRIPTA MATERIALIA

Superior strength-ductility synergy in a novel tailored nanoparticles-strengthened medium-entropy alloy

(2021) Hanlin Peng et al.   SCRIPTA MATERIALIA

Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys

(2020) T. Yang et al.   ACTA MATERIALIA

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

(2020) Xiuli Shen et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Short-range order and its impact on the CrCoNi medium-entropy alloy

(2020) Ruopeng Zhang et al.   NATURE

Solid solution strengthening in multiprincipal element fcc and bcc alloys: Analytical approach

(2020) M. Lugovy et al.   Progress in Natural Science-Materials International

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

(2020) X. H. Du et al.   Nature Communications

Interstitials in f.c.c. High Entropy Alloys

(2020) Ian Baker   Metals

Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties

(2020) R. Sokkalingam et al.   MATERIALS AND MANUFACTURING PROCESSES

Enhanced radiation tolerance of the Ni-Co-Cr-Fe high-entropy alloy as revealed from primary damage

(2020) Yeping Lin et al.   ACTA MATERIALIA

Development and characterization of novel Ni-rich high-entropy alloys

(2020) Zuozhe Niu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Welding Parameters on the Liquation Cracking Behavior of High-Chromium Ni-Based Superalloy

(2020) Amirhossein Mashhuriazar et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures

(2020) Lei Fan et al.   Nature Communications

A promising CoFeNi2V0.5Mo0.2 high entropy alloy with exceptional ductility

(2019) L. Jiang et al.   SCRIPTA MATERIALIA

Revealing the Hall-Petch relationship of Al0.1CoCrFeNi high-entropy alloy and its deformation mechanisms

(2019) J. Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterization of high-strength high‑nitrogen austenitic stainless steel synthesized from nitrided powders by spark plasma sintering

(2019) Ling Hu et al.   MATERIALS CHARACTERIZATION

Laser dissimilar weldability of cast and rolled CoCrFeMnNi high-entropy alloys for cryogenic applications

(2019) Hyunbin Nam et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys

(2019) S.R. Reddy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the correlation between L12 nanoparticles and mechanical properties of (NiCo)52+2x(AlTi)4+2xFe29-4xCr15 (x=0-4) high-entropy alloys

(2019) Hanlin Peng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy

(2019) Nikolai Kashaev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ripening of L12 nanoparticles and their effects on mechanical properties of Ni28Co28Fe21Cr15Al4Ti4 high-entropy alloys

(2019) Hanlin Peng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel

(2018) Ran Ding et al.   ACTA MATERIALIA

Mechanical behavior and solid solution strengthening model for face-centered cubic single crystalline and polycrystalline high-entropy alloys

(2018) Jongun Moon et al.   INTERMETALLICS

Laser beam welding of a CoCrFeNiMn-type high entropy alloy produced by self-propagating high-temperature synthesis

(2018) Nikolai Kashaev et al.   INTERMETALLICS

Realizing strength-ductility combination of coarse-grained Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 alloy via nano-sized, coherent precipitates

(2018) Kaisheng Ming et al.   INTERNATIONAL JOURNAL OF PLASTICITY

L12-strengthened high-entropy alloys for advanced structural applications

(2018) Tao Yang et al.   JOURNAL OF MATERIALS RESEARCH

Mechanical properties of a new high entropy alloy with a duplex ultra-fine grained structure

(2018) N.D. Stepanov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming

(2018) Jianjun Xu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel

(2018) B.B. He et al.   SCRIPTA MATERIALIA

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

(2018) Yao-Jian Liang et al.   Nature Communications

Laser weldability of cast and rolled high-entropy alloys for cryogenic applications

(2018) Hyunbin Nam et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

(2018) T. Yang et al.   SCIENCE

Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures

(2018) Y. Tong et al.   ACTA MATERIALIA

Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys

(2017) Y.Y. Zhao et al.   INTERMETALLICS

Direct versus indirect particle strengthening in a strong, ductile FeNiMnAlTi high entropy alloy

(2017) Zhangwei Wang et al.   MATERIALS CHARACTERIZATION

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

(2017) Suihe Jiang et al.   NATURE

Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing

(2017) Shuhei Yoshida et al.   SCRIPTA MATERIALIA

Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation

(2016) N.A.P. Kiran Kumar et al.   ACTA MATERIALIA

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Effect of carbon content and annealing on structure and hardness of the CoCrFeNiMn-based high entropy alloys

(2016) N.D. Stepanov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Interstitial strengthening of a f.c.c. FeNiMnAlCr high entropy alloy

(2016) Zhangwei Wang et al.   MATERIALS LETTERS

Weldability of a high entropy CrMnFeCoNi alloy

(2016) Z. Wu et al.   SCRIPTA MATERIALIA

Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures

(2015) A. Haglund et al.   INTERMETALLICS

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)

(2015) H. M. Daoud et al.   JOM

Single crystal plastic behavior of a single-phase, face-center-cubic-structured, equiatomic FeNiCrCo alloy

(2015) Z. Wu et al.   SCRIPTA MATERIALIA

Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

(2014) Z. Wu et al.   ACTA MATERIALIA

Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification

(2014) S.G. Ma et al.   INTERMETALLICS

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

(2013) J.Y. He et al.   ACTA MATERIALIA

Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys

(2013) R. Sriharitha et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel

(2013) B.B. He et al.   SCRIPTA MATERIALIA

Vacuum heat treatment, deep cryogenic treatment and simultaneous pulse plasma nitriding and tempering of P/M S390MC steel

(2011) Vojteh Leskovšek et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING