New Smart Models for Minimum Fluidization Velocity Forecasting in the Tapered Fluidized Beds Based on Particle Size Distribution

Applying Genetic Programming in Estimation of Frost Layer Thickness on Horizontal and Vertical Plates at Ultra-Low Temperature

(2021) S.H. Hosseini et al.   INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID

An insight into the estimation of frost thermal conductivity on parallel surface channels using kernel based GPR strategy

(2021) Xuejun Zhou et al.   Scientific Reports

Estimation of the minimum spouting velocity and pressure drop in open-sided draft tube spouted beds using genetic programming

(2021) M.A. Moradkhani et al.   POWDER TECHNOLOGY

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

(2021) Mojtaba Rasteh et al.   Particuology

Research on Fluidization performance of different tapered fluidized bed reactors for fluidizing carbon nanotubes

(2020) Wenjuan Bai et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

A general heat transfer correlation for flow condensation in single port mini and macro channels using genetic programming

(2020) S.H. Hosseini et al.   INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID

Distinguishing Liquid Transport Patterns during the Fluidization of Wet Particles with Bed Expansion Behaviors

(2020) Suyang Pan et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

General equation for flow condensation heat transfer coefficient in different orientations of helical coils of smooth tubes using genetic programming

(2020) S.H. Hosseini et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

A general correlation for the frictional pressure drop during condensation in mini/micro and macro channels

(2020) M.A. Moradkhani et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Estimation of the minimum spouting velocity in shallow spouted beds by intelligent approaches: Study of fine and coarse particles

(2019) S.H. Hosseini et al.   POWDER TECHNOLOGY

Evaluation of correlations for minimum fluidization velocity ( Umf ) in gas-solid fluidization

(2018) Aditya Anantharaman et al.   POWDER TECHNOLOGY

Empirical models for minimum fluidization velocity of particles with different size distribution in tapered fluidized beds

(2018) Mojtaba Rasteh et al.   POWDER TECHNOLOGY

Minimum fluidization velocity growth due to bed inventory increase in an Air Dense Medium Fluidized Bed

(2018) Zhijie Fu et al.   CHEMICAL ENGINEERING JOURNAL

Prediction of frost layer over flat plates under natural and forced convection conditions using intelligent and least-square fitting approaches

(2018) S.H. Hosseini et al.   APPLIED THERMAL ENGINEERING

Designing an Efficient Artificial Intelligent Approach for Estimation of Hydrodynamic Characteristics of Tapered Fluidized Bed from Its Design and Operating Parameters

(2017) Mohsen Karimi et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Robust predictive models for estimating frost deposition on horizontal and parallel surfaces

(2017) Alireza Zendehboudi et al.   INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID

Utilization of the RBF network to model the nucleate pool boiling heat transfer properties of refrigerant-oil mixtures with nanoparticles

(2017) Alireza Zendehboudi et al.   JOURNAL OF MOLECULAR LIQUIDS

Influence of particle size distribution on minimum fluidization velocity and bed expansion at elevated pressure

(2017) Rongtao Feng et al.   POWDER TECHNOLOGY

On accurate determination of PVT properties in crude oil systems: Committee machine intelligent system modeling approach

(2015) Amin Shokrollahi et al.   Journal of the Taiwan Institute of Chemical Engineers

Hydrodynamic characteristics of gas–solid tapered fluidized beds: Experimental studies and empirical models

(2015) Mojtaba Rasteh et al.   POWDER TECHNOLOGY

Prediction of the Minimum Spouting Velocity by Genetic Programming Approach

(2014) Seyyed Hossein Hosseini et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Why are Normal Distributions Normal?

(2013) A. Lyon   BRITISH JOURNAL FOR THE PHILOSOPHY OF SCIENCE

Hydrodynamics of three-phase fluidization of a homogeneous ternary mixture of irregular particles

(2012) D.T.K. Dora et al.   CHEMICAL ENGINEERING SCIENCE

Predicting minimum fluidization velocities of multi-component solid mixtures

(2012) Mohammad Asif   Particuology

Investigation of the particle–particle drag in a dense binary fluidized bed

(2012) Zhongxi Chao et al.   POWDER TECHNOLOGY

Segregation of particles in a tapered fluidized bed

(2012) T.M. Gernon et al.   POWDER TECHNOLOGY

The effect of column diameter and bed height on minimum fluidization velocity

(2010) Akhil Rao et al.   AICHE JOURNAL

Axial segregation in bubbling gas-fluidized beds with Gaussian and lognormal distributions of Geldart Group B particles

(2010) Jia Wei Chew et al.   AICHE JOURNAL

Models for prediction of hydrodynamic characteristics of gas–solid tapered and mini-tapered fluidized beds

(2010) M.H. Khani   POWDER TECHNOLOGY

On the minimum fluidization velocity in 2D fluidized beds

(2010) S. Sánchez-Delgado et al.   POWDER TECHNOLOGY

Hydrodynamics of gas-solid fluidization in tapered beds

(2009) J. S. N. Murthy et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

CFD and experimental studies of solids hold-up distribution and circulation patterns in gas–solid fluidized beds

(2008) G.N. Ahuja et al.   CHEMICAL ENGINEERING JOURNAL

Studies on pressure drop and minimum fluidization velocity of gas–solid fluidization of homogeneous well-mixed ternary mixtures in un-promoted and promoted square bed

(2008) H JENA et al.   CHEMICAL ENGINEERING JOURNAL

Theoretical and experimental study on hydrodynamic characteristics of fluidization in air–sand conical beds

(2007) Rachadaporn Kaewklum et al.   CHEMICAL ENGINEERING SCIENCE