Effects of bedding planes on mechanical characteristics and crack evolution of rocks containing a single pre-existing flaw
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effects of bedding planes on mechanical characteristics and crack evolution of rocks containing a single pre-existing flaw
Authors
Keywords
Discrete element method, Bedding plane, Pre-existing flaw, Mechanical characteristics, Crack evolution, Rock slope stability
Journal
ENGINEERING GEOLOGY
Volume 293, Issue -, Pages 106325
Publisher
Elsevier BV
Online
2021-08-09
DOI
10.1016/j.enggeo.2021.106325
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Rate dependency mechanism of crystalline rocks induced by impacts: Insights from grain-scale fracturing and micro heterogeneity
- (2021) X.F. Li et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Full-field strain evolution and characteristic stress levels of rocks containing a single pre-existing flaw under uniaxial compression
- (2020) Liwang Liu et al. Bulletin of Engineering Geology and the Environment
- Geomechanical behaviors of shale after water absorption considering the combined effect of anisotropy and hydration
- (2020) Qiangui Zhang et al. ENGINEERING GEOLOGY
- Mechanical behavior and failure analysis of fracture-filled gneissic granite
- (2020) Yixian Wang et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Experimental Study and Numerical Simulation of the Dynamic Behavior of Transversely Isotropic Phyllite
- (2020) Renjie Wu et al. International Journal of Geomechanics
- Seismic response analysis of a bedding rock slope based on the time-frequency joint analysis method: a case study from the middle reach of the Jinsha River, China
- (2020) Danqing Song et al. ENGINEERING GEOLOGY
- Transgranular fracturing of crystalline rocks and its influence on rock strengths: Insights from a grain-scale continuum–discontinuum approach
- (2020) X.F. Li et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Underlying Mechanisms of Crack Initiation for Granitic Rocks Containing a Single Pre-existing Flaw: Insights From Digital Image Correlation (DIC) Analysis
- (2020) Liwang Liu et al. Rock Mechanics and Rock Engineering
- Fracture evolution in bedded analog rocks containing a structural flaw
- (2019) Ding-Jian Wang et al. ENGINEERING GEOLOGY
- Effect of High Temperature on Deformation Failure Behavior of Granite Specimen Containing a Single Fissure Under Uniaxial Compression
- (2019) Sheng-Qi Yang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Investigation on anisotropy of mechanical properties of Callovo-Oxfordian claystone
- (2019) Chun-Liang Zhang et al. ENGINEERING GEOLOGY
- Stability analysis of anti-dip bedding rock slopes locally reinforced by rock bolts
- (2019) Yun Zheng et al. ENGINEERING GEOLOGY
- Strength and failure characteristics of rock-like material containing single crack under freeze-thaw and uniaxial compression
- (2019) Shibing Huang et al. COLD REGIONS SCIENCE AND TECHNOLOGY
- Mechanical behaviors and acoustic emission fractal characteristics of coal specimens with a pre-existing flaw of various inclinations under uniaxial compression
- (2019) Dexing Li et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- The role of transgranular capability in grain-based modelling of crystalline rocks
- (2019) X.F. Li et al. COMPUTERS AND GEOTECHNICS
- Effect of crack angles on energy characteristics of sandstones under a complex stress path
- (2019) Kang Peng et al. ENGINEERING FRACTURE MECHANICS
- Mechanical behavior of transversely isotropic rocks with non-continuous planar fabrics under compression tests
- (2019) Guowen Xu et al. COMPUTERS AND GEOTECHNICS
- Mechanical characterisation of jointed rock-like material with non-persistent rough joints subjected to uniaxial compression
- (2019) Mostafa Asadizadeh et al. ENGINEERING GEOLOGY
- Mechanical Properties and Failure Patterns of Migmatized Gneiss with Metamorphic Foliation Under UCS Test
- (2019) Andrea Berčáková et al. ROCK MECHANICS AND ROCK ENGINEERING
- Co-effects of bedding planes and parallel flaws on fracture evolution in anisotropic rocks
- (2019) Ding-Jian Wang et al. ENGINEERING GEOLOGY
- Failure mechanism and stabilization of a basalt rock slide with weak layers
- (2018) Demin Xue et al. ENGINEERING GEOLOGY
- Failure characteristics of rock-like materials with single flaws under uniaxial compression
- (2018) Cheng Zhao et al. Bulletin of Engineering Geology and the Environment
- Effect of Grout on Mechanical Properties and Cracking Behavior of Rock-Like Specimens Containing a Single Flaw under Uniaxial Compression
- (2018) Huilin Le et al. International Journal of Geomechanics
- Cracking processes affected by bedding planes in Opalinus shale with flaw pairs
- (2017) S.P. Morgan et al. ENGINEERING FRACTURE MECHANICS
- Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method
- (2016) Yousheng Xie et al. COMPUTERS AND GEOTECHNICS
- Multi-peak deformation behavior of jointed rock mass under uniaxial compression: Insight from particle flow modeling
- (2016) Cheng Cheng et al. ENGINEERING GEOLOGY
- Numerical Study of the Mechanical Behavior of Nonpersistent Jointed Rock Masses
- (2016) M. Bahaaddini et al. International Journal of Geomechanics
- Mechanical properties and failure modes of rock samples with grout-infilled flaws: A particle mechanics modeling
- (2016) Zhihong Zhao et al. Journal of Natural Gas Science and Engineering
- Experimental study on the formation of faults from en-echelon fractures in Carrara Marble
- (2015) Yi Cheng et al. ENGINEERING GEOLOGY
- Discrete element modeling of anisotropic rock under Brazilian test conditions
- (2015) K. Duan et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- A critical review of rock slope failure mechanisms: The importance of structural geology
- (2015) Doug Stead et al. JOURNAL OF STRUCTURAL GEOLOGY
- Assessment of Inherent Anisotropy and Confining Pressure Influences on Mechanical Behavior of Anisotropic Foliated Rocks Under Triaxial Compression
- (2015) Davood Fereidooni et al. ROCK MECHANICS AND ROCK ENGINEERING
- Hybrid Finite-Discrete Element Simulation of the EDZ Formation and Mechanical Sealing Process Around a Microtunnel in Opalinus Clay
- (2015) Andrea Lisjak et al. ROCK MECHANICS AND ROCK ENGINEERING
- A nonlinear criterion for triaxial strength of inherently anisotropic rocks
- (2015) Mahendra Singh et al. ROCK MECHANICS AND ROCK ENGINEERING
- Strength Anisotropy of Berea Sandstone: Results of X-Ray Computed Tomography, Compression Tests, and Discrete Modeling
- (2015) Kwang Yeom Kim et al. ROCK MECHANICS AND ROCK ENGINEERING
- The excavation of a circular tunnel in a bedded argillaceous rock (Opalinus Clay): Short-term rock mass response and FDEM numerical analysis
- (2015) A. Lisjak et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Failure of transversely isotropic rock under Brazilian test conditions
- (2014) André Vervoort et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Anisotropy is Everywhere, to See, to Measure, and to Model
- (2014) Nick Barton et al. ROCK MECHANICS AND ROCK ENGINEERING
- Brazilian Tests on Transversely Isotropic Rocks: Laboratory Testing and Numerical Simulations
- (2014) Xin Tan et al. ROCK MECHANICS AND ROCK ENGINEERING
- Brazilian tensile strength tests on some anisotropic rocks
- (2013) Dinh Quoc Dan et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Continuum–discontinuum analysis of failure mechanisms around unsupported circular excavations in anisotropic clay shales
- (2013) A. Lisjak et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Mechanical and Elastic Properties of Transversely Isotropic Slate
- (2013) R. Gholami et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression
- (2012) M. Bahaaddini et al. COMPUTERS AND GEOTECHNICS
- Anisotropy of elastic moduli, P-wave velocities, and thermal conductivities of Asan Gneiss, Boryeong Shale, and Yeoncheon Schist in Korea
- (2012) Hanna Kim et al. ENGINEERING GEOLOGY
- Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist
- (2012) Jung-Woo Cho et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression
- (2010) C.H. Park et al. ENGINEERING FRACTURE MECHANICS
- Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression
- (2010) Sheng-Qi Yang et al. INTERNATIONAL JOURNAL OF FRACTURE
- Failure of Layered Sandstone under Brazilian Test Conditions: Effect of Micro-Scale Parameters on Macro-Scale Behaviour
- (2010) Abbass Tavallali et al. ROCK MECHANICS AND ROCK ENGINEERING
- Experimental observation of fracture patterns in layered slate
- (2009) B. Debecker et al. INTERNATIONAL JOURNAL OF FRACTURE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started