Numerical-modeling-based assessment of the impact of two-end-type cable support on failure characteristics of yield pillars
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Numerical-modeling-based assessment of the impact of two-end-type cable support on failure characteristics of yield pillars
Authors
Keywords
Two-end-type cable support, Failure characteristics, Coal pillar, Artificial support
Journal
ENGINEERING FAILURE ANALYSIS
Volume 128, Issue -, Pages 105619
Publisher
Elsevier BV
Online
2021-07-17
DOI
10.1016/j.engfailanal.2021.105619
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Numerical study of stability of mining roadways with 6.0-m section coal pillars under influence of repeated mining
- (2021) Ze Xia et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Stability Control of Deep Coal Roadway under the Pressure Relief Effect of Adjacent Roadway with Large Deformation: A Case Study
- (2021) Houqiang Yang et al. Sustainability
- Integration of three-dimensional continuum model and two-dimensional bonded block model for studying the damage process in a granite pillar at the Creighton Mine, Sudbury, Canada
- (2020) Sankhaneel Sinha et al. Journal of Rock Mechanics and Geotechnical Engineering
- Research on mechanism and control of asymmetric deformation of gob side coal roadway with fully mechanized caving mining
- (2020) Xuhui Xu et al. ENGINEERING FAILURE ANALYSIS
- Assessment of the Strength of Inclined Coal Pillars through Numerical Modelling based on the Ubiquitous Joint Model
- (2019) Arka Jyoti Das et al. ROCK MECHANICS AND ROCK ENGINEERING
- Ground Response of a Gob-side Entry in a Longwall Panel Extracting 17 m-Thick Coal Seam: A Case Study
- (2019) G. C. Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Energy Evolution Pattern and Roof Control Strategy in Non-Pillar Mining Method of Goaf-Side Entry Retaining by Roof Cutting—A Case Study
- (2019) Lifeng Li et al. Sustainability
- Numerical modeling for longwall pillar design: a case study from a typical longwall panel in China
- (2018) Guangchao Zhang et al. Journal of Geophysics and Engineering
- Stability of Gate Roads Next to an Irregular Yield Pillar: A Case Study
- (2018) Guorui Feng et al. ROCK MECHANICS AND ROCK ENGINEERING
- Modeling the progressive failure of hard rock pillars
- (2018) H. Rafiei Renani et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Numerical simulation of the pull-out behaviour of fully grouted cable bolts
- (2018) Jianhang Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Numerical Study of Failure Mechanisms and Control Techniques for a Gob-Side Yield Pillar in the Sijiazhuang Coal Mine, China
- (2018) Wen-da Wu et al. ROCK MECHANICS AND ROCK ENGINEERING
- Feasibility investigation of cryogenic effect from liquid carbon dioxide multi cycle fracturing technology in coalbed methane recovery
- (2017) Jizhao Xu et al. FUEL
- Numerical Approach for Goaf-Side Entry Layout and Yield Pillar Design in Fractured Ground Conditions
- (2017) Lishuai Jiang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Analysis of Gateroad Stability in Relation to Yield Pillar Size: A Case Study
- (2017) Guang-chao Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Adaptation assessment of gob-side entry retaining based on geological factors
- (2016) Hongyun Yang et al. ENGINEERING GEOLOGY
- Investigation on the Influence of Abutment Pressure on the Stability of Rock Bolt Reinforced Roof Strata Through Physical and Numerical Modeling
- (2016) Hongpu Kang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Simultaneous pattern and size optimisation of rock bolts for underground excavations
- (2015) Tin Nguyen et al. COMPUTERS AND GEOTECHNICS
- Investigation on support pattern of a coal mine roadway within soft rocks — a case study
- (2015) H.P. Kang et al. INTERNATIONAL JOURNAL OF COAL GEOLOGY
- An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal caving
- (2015) Zizheng Zhang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Determination of Longwall Mining-Induced Stress Using the Strain Energy Method
- (2015) Mohammad Rezaei et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical investigation into effect of rear barrier pillar on stress distribution around a longwall face
- (2015) Ming-he Ju et al. Journal of Central South University
- Numerical Simulation of Squeezing Failure in a Coal Mine Roadway due to Mining-Induced Stresses
- (2014) Fuqiang Gao et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical Modeling for Yield Pillar Design: A Case Study
- (2013) Wenfeng Li et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical Investigation of the Dynamic Mechanical State of a Coal Pillar During Longwall Mining Panel Extraction
- (2012) Hongwei Wang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical simulation of coal pillar strength
- (2008) Ashok Jaiswal et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now