Polyethylene waste gasification syngas analysis and multi-objective optimization using central composite design for simultaneous minimization of required heat and maximization of exergy efficiency

Multi-criteria optimization of a biomass gasification-based combined cooling, heating, and power system integrated with an organic Rankine cycle in different climate zones in China

(2021) C.Y. Li et al.   ENERGY CONVERSION AND MANAGEMENT

Pyrolysis of waste polyethylene in a semi-batch reactor to produce liquid fuel: Optimization of operating conditions

(2021) Ruming Pan et al.   ENERGY CONVERSION AND MANAGEMENT

Comparative study on air gasification of plastic waste and conventional biomass based on coupling of AHP/TOPSIS multi-criteria decision analysis

(2021) Mehran Mojaver et al.   CHEMOSPHERE

A comparison of steam and oxygen fed biomass gasification through a techno-economic-environmental study

(2020) Ahmed AlNouss et al.   ENERGY CONVERSION AND MANAGEMENT

Gasification of plastic waste for synthesis gas production

(2020) Dang Saebea et al.   Energy Reports

Co-gasification of plastic wastes and soda lignin in supercritical water

(2020) Changqing Cao et al.   CHEMICAL ENGINEERING JOURNAL

Copper and calcium-based metal organic framework (MOF) catalyst for biodiesel production from waste cooking oil: A process optimization study

(2020) Unza Jamil et al.   ENERGY CONVERSION AND MANAGEMENT

Kinetic modeling of microalgae growth and CO2 bio-fixation using central composite design statistical approach

(2020) Fares Almomani   SCIENCE OF THE TOTAL ENVIRONMENT

Gasification feasibility of polyethylene, polypropylene, polystyrene waste and their mixture: Experimental studies and modeling

(2020) Isam Janajreh et al.   Sustainable Energy Technologies and Assessments

Optimization of polyvinylamine-modified nanocellulose for chlorpyrifos adsorption by central composite design

(2020) Jie Yang et al.   CARBOHYDRATE POLYMERS

Characteristics of gas from the fluidized bed gasification of refuse paper and plastic fuel (RPF) and wood biomass

(2019) Myo Min Win et al.   WASTE MANAGEMENT

A prediction model using response surface methodology based on cell size and foam density to predict thermal conductivity of polystyrene foams

(2019) Rezgar Hasanzadeh et al.   HEAT AND MASS TRANSFER

Modeling and economic analysis of waste tire gasification in fluidized and fixed bed gasifiers

(2019) Guiyan Zang et al.   WASTE MANAGEMENT

Syngas production from co-pyrolysis and co-gasification of polystyrene and paper with CO2

(2019) N. Déparrois et al.   APPLIED ENERGY

Validation and Application of a Kinetic Model for Downdraft Biomass Gasification Simulation

(2019) Jia Yu et al.   CHEMICAL ENGINEERING & TECHNOLOGY

A novel biobased heterogeneous catalyst derived from Musa acuminata peduncle for biodiesel production – Process optimization using central composite design

(2019) Muthusamy Balajii et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental study on gasification performance of polypropylene (PP) plastics in supercritical water

(2019) Bin Bai et al.   ENERGY

Study of synthesis gas composition, exergy assessment, and multi-criteria decision-making analysis of fluidized bed gasifier

(2019) Parisa Mojaver et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Multi-objective optimization and decision analysis of a system based on biomass fueled SOFC using couple method of entropy/VIKOR

(2019) Parisa Mojaver et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation on gasification characteristics of polyethylene terephthalate (PET) microplastics in supercritical water

(2019) Bin Bai et al.   FUEL

Thermal Conductivity of Low-Density Polyethylene Foams Part II: Deep Investigation using Response Surface Methodology

(2019) Rezgar Hasanzadeh et al.   Journal of Thermal Science

Performance assessment of a combined heat and power system: A novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system part I: Thermodynamic analysis

(2018) Parisa Mojaver et al.   ENERGY CONVERSION AND MANAGEMENT

Exergetic and exergoeconomic assessment of a novel CHP system integrating biomass partial gasification with ground source heat pump

(2018) Xiaofeng Zhang et al.   ENERGY CONVERSION AND MANAGEMENT

Recent advances in the gasification of waste plastics. A critical overview

(2018) Gartzen Lopez et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Preparation and Characterization of Mn0.4Zn0.6Fe2O4 Nanoparticles Supported on Dead Cells of Yarrowia lipolytica as a Novel and Efficient Adsorbent/Biosorbent Composite for the Removal of Azo Food Dyes: Central Composite Design Optimization Study

(2018) Arash Asfaram et al.   ACS Sustainable Chemistry & Engineering

Comparative analysis of wood and solid recovered fuels gasification in a downdraft fixed bed reactor

(2018) G. Vonk et al.   WASTE MANAGEMENT

Experimental investigation on gasification characteristics of plastic wastes in supercritical water

(2018) Bin Bai et al.   RENEWABLE ENERGY

Recent advances in the development of biomass gasification technology: A comprehensive review

(2017) S.K. Sansaniwal et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

(2017) Gartzen Lopez et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Production, use, and fate of all plastics ever made

(2017) Roland Geyer et al.   Science Advances

Catalytic dry reforming of waste plastics from different waste treatment plants for production of synthesis gases

(2016) Juniza Md Saad et al.   WASTE MANAGEMENT

Recovery of copper from PVC multiwire cable waste by steam gasification

(2015) Monika Zabłocka-Malicka et al.   WASTE MANAGEMENT

Energy generation by air gasification of two industrial plastic wastes in a pilot scale fluidized bed reactor

(2014) Umberto Arena et al.   ENERGY

Investigation on syngas production via biomass conversion through the integration of pyrolysis and air–steam gasification processes

(2014) Reza Alipour Moghadam et al.   ENERGY CONVERSION AND MANAGEMENT

Comparison of several glycerol reforming methods for hydrogen and syngas production using Gibbs energy minimization

(2014) Antonio C.D. Freitas et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Enhanced styrene recovery from waste polystyrene pyrolysis using response surface methodology coupled with Box–Behnken design

(2014) Yu Mo et al.   WASTE MANAGEMENT

Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier

(2013) V. Wilk et al.   FUEL

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

(2013) Maite Artetxe et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

(2011) M. Arabiourrutia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research

(2011) E. Butler et al.   Waste and Biomass Valorization

Fluidized bed gasification of waste-derived fuels

(2010) Umberto Arena et al.   WASTE MANAGEMENT

Syngas production from catalytic gasification of waste polyethylene: Influence of temperature on gas yield and composition

(2009) M HE et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Hydrogen production by steam gasification of polypropylene with various nickel catalysts

(2008) Chunfei Wu et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Equilibrium modeling of gasification: Gibbs free energy minimization approach and its application to spouted bed and spout-fluid bed gasifiers

(2008) S. Jarungthammachote et al.   ENERGY CONVERSION AND MANAGEMENT

Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review

(2008) J. Aguado et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH