Corrosion-related failures in heat exchangers

Review of common failures in heat exchangers – Part I: Mechanical and elevated temperature failures

(2020) Murad Ali et al.   ENGINEERING FAILURE ANALYSIS

Failure analysis of the wall tubes of a water-tube boiler

(2017) Camilo A. Duarte et al.   ENGINEERING FAILURE ANALYSIS

Microbially induced rupture of a heat exchanger shell

(2017) Tony Y. Rizk et al.   ENGINEERING FAILURE ANALYSIS

Experimental assessment of thermal grain boundary embrittlement after tubeplate failure in a petrochemical heat exchanger

(2017) Jose L. Otegui et al.   ENGINEERING FAILURE ANALYSIS

Stress corrosion cracking of a circulation water heater tubesheet

(2017) A.R. Khalifeh et al.   ENGINEERING FAILURE ANALYSIS

Failure analysis of multiphase flow corrosion–erosion with three-way injecting water pipe

(2017) Haozhe Jin et al.   ENGINEERING FAILURE ANALYSIS

Effect of deformation-induced phase transformation on AISI 316 stainless steel corrosion resistance

(2017) Nicolae Solomon et al.   ENGINEERING FAILURE ANALYSIS

Impact of Nonuniform Fouling on Operating Temperatures in Heat Exchanger Networks

(2016) Les Jackowski et al.   HEAT TRANSFER ENGINEERING

Failure analysis of AISI 321 tubes of heat exchanger

(2015) J.S. Corte et al.   ENGINEERING FAILURE ANALYSIS

Effects of laser remelting on microstructure and solid particle erosion characteristics of ZrO2–7wt%Y2O3 thermal barrier coating prepared by plasma spraying

(2014) Dongsheng Wang et al.   CERAMICS INTERNATIONAL

Erosion of heat exchangers due to sootblowing

(2013) Wacław Wojnar   ENGINEERING FAILURE ANALYSIS

Microbiologically influenced corrosion (MIC) in stainless steel heat exchanger

(2012) E. Huttunen-Saarivirta et al.   APPLIED SURFACE SCIENCE

Failure analysis of the brass tubes in a lubricating oil cooler

(2011) S. Qu et al.   ENGINEERING FAILURE ANALYSIS

Studying the effect of sensitization on the threshold stress intensity and crack growth for chloride stress corrosion cracking of austenitic stainless steel using circumferential notch tensile technique

(2011) Sarvesh Pal et al.   ENGINEERING FRACTURE MECHANICS

Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part I: Electrochemical corrosion

(2011) Z.-G. Yang et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Failure analysis of welded 0Cr13Al tube bundle in a heat exchanger

(2010) C. Guo et al.   ENGINEERING FAILURE ANALYSIS

Failure analysis of a shell and tube oil cooler

(2010) R. Taherzadeh Mousavian et al.   ENGINEERING FAILURE ANALYSIS

Failure analysis of heat exchanger tubes of four gas coolers

(2010) S.R. Allahkaram et al.   ENGINEERING FAILURE ANALYSIS

Failure analysis of bursting on the inner pipe of a jacketed pipe in a tubular heat exchanger

(2010) Yi Gong et al.   MATERIALS & DESIGN

Failure of hydrocracker heat exchanger tubes in an oil refinery by polythionic acid-stress corrosion cracking

(2009) Η.Μ. Τawancy   ENGINEERING FAILURE ANALYSIS

Erosion–corrosion of heat exchanger tubes

(2009) B. Kuźnicka   ENGINEERING FAILURE ANALYSIS

Failure investigation of heat exchanger plates due to pitting corrosion

(2009) K.M. Deen et al.   ENGINEERING FAILURE ANALYSIS

Effect of flow induced corrosion and erosion on failure of a tubular heat exchanger

(2009) Khalil Ranjbar   MATERIALS & DESIGN

Failure analysis of 316L stainless steel tubing of the high-pressure still condenser

(2008) T.M. Ahmed et al.   ENGINEERING FAILURE ANALYSIS

Understanding localized corrosion

(2008) G.S. Frankel et al.   Materials Today

Cracking of 2.25Cr–1.0Mo steel tube/stationary tube-sheet weldment of a heat-exchanger

(2007) C.R.F. Azevedo et al.   ENGINEERING FAILURE ANALYSIS