FDEM numerical modeling of failure mechanisms of anisotropic rock masses around deep tunnels
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
FDEM numerical modeling of failure mechanisms of anisotropic rock masses around deep tunnels
Authors
Keywords
Anisotropic rock masses, Combined finite-discrete element method (FDEM), Failure mechanism, Composite failure, V-shaped notch failure, Spalling of bedding plane
Journal
COMPUTERS AND GEOTECHNICS
Volume 142, Issue -, Pages 104535
Publisher
Elsevier BV
Online
2021-11-06
DOI
10.1016/j.compgeo.2021.104535
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Sensitivity analysis of fracture energies for the combined finite-discrete element method (FDEM)
- (2021) Penghai Deng et al. ENGINEERING FRACTURE MECHANICS
- Study on the damage evolution of secondary tunnel lining in layered rock stratum
- (2020) Guowen Xu et al. Bulletin of Engineering Geology and the Environment
- Effects of joint surface roughness and orientational anisotropy on characteristics of excavation damage zone in jointed rocks
- (2020) Zhihong Zhao et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Lattice modeling of excavation damage in argillaceous clay formations: Influence of deformation and strength anisotropy
- (2020) Kunhwi Kim et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Numerical appraisal of rock mass anisotropy effect on elastic deformations of a circular tunnel
- (2020) Vahid Maazallahi et al. Arabian Journal of Geosciences
- Analytical Solution for a Deep Circular Tunnel in Anisotropic Ground and Anisotropic Geostatic Stresses
- (2020) Osvaldo P. M. Vitali et al. ROCK MECHANICS AND ROCK ENGINEERING
- Time-dependent crack development processes around underground excavations
- (2020) Penghai Deng et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Acquisition of normal contact stiffness and its influence on rock crack propagation for the combined finite-discrete element method (FDEM)
- (2020) Penghai Deng et al. ENGINEERING FRACTURE MECHANICS
- Stability of large underground caverns excavated in layered rock masses with steep dip angles: a case study
- (2019) Xiuli Ding et al. Bulletin of Engineering Geology and the Environment
- Analysis of a Complex Flexural Toppling Failure of Large Underground Caverns in Layered Rock Masses
- (2019) Ang Li et al. ROCK MECHANICS AND ROCK ENGINEERING
- Supporting mechanism and mechanical behavior of a double primary support method for tunnels in broken phyllite under high geo-stress: a case study
- (2019) Ziquan Chen et al. Bulletin of Engineering Geology and the Environment
- A Case Study on the Asymmetric Deformation Characteristics and Mechanical Behavior of Deep-Buried Tunnel in Phyllite
- (2019) Ziquan Chen et al. ROCK MECHANICS AND ROCK ENGINEERING
- A new classification of failure mechanisms at tunnels in stratified rock masses through physical and numerical modeling
- (2019) Nader Moussaei et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Influence of the softening stress path on crack development around underground excavations: Insights from 2D-FDEM modelling
- (2019) Penghai Deng et al. COMPUTERS AND GEOTECHNICS
- The Mechanical Analysis and Interpretation of the EDZ Formation around Deep Tunnels within Massive Rockmasses Using a Hybrid Finite-Discrete Element Approach: The case of the AECL URL Test Tunnel
- (2018) Ioannis Vazaios et al. CANADIAN GEOTECHNICAL JOURNAL
- Stability analysis and failure mechanism of the steeply inclined bedded rock masses surrounding a large underground opening
- (2018) Ang Li et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Numerical Investigation of Squeezing in Underground Hard Rock Mines
- (2018) Pranay Yadav et al. ROCK MECHANICS AND ROCK ENGINEERING
- A case study on large deformation failure mechanism of deep soft rock roadway in Xin'An coal mine, China
- (2017) Sheng-Qi Yang et al. ENGINEERING GEOLOGY
- Practical Use of the Ubiquitous-Joint Constitutive Model for the Simulation of Anisotropic Rock Masses
- (2017) B. L. Sainsbury et al. ROCK MECHANICS AND ROCK ENGINEERING
- Constitutive representation and damage degree index for the layered rock mass excavation response in underground openings
- (2017) Ding-Ping Xu et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Prediction of Brittle Failure for TBM Tunnels in Anisotropic Rock: A Case Study from Northern Norway
- (2016) Øyvind Dammyr ROCK MECHANICS AND ROCK ENGINEERING
- Theoretical analysis and seismic investigation for TBM jamming in squeezing fissile slate
- (2016) Yu Koizumi et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Evolution of stress-induced borehole breakout in inherently anisotropic rock: Insights from discrete element modeling
- (2016) K. Duan et al. JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
- Enhancement of low-contrast thermograms for detecting the stressed tunnel in horizontally stratified rocks
- (2015) Weili Gong et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Analytical approaches for studying the stability of laminated roof strata
- (2015) Mahdi Shabanimashcool et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Discrete element modelling of the buckling phenomenon in deep hard rock mines
- (2015) Efstratios Karampinos et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- A calibration procedure for two-dimensional laboratory-scale hybrid finite–discrete element simulations
- (2015) B.S.A. Tatone et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Hybrid Finite-Discrete Element Simulation of the EDZ Formation and Mechanical Sealing Process Around a Microtunnel in Opalinus Clay
- (2015) Andrea Lisjak et al. ROCK MECHANICS AND ROCK ENGINEERING
- Shale Failure Mechanics and Intervention Measures in Underground Coal Mines: Results From 50 Years of Ground Control Safety Research
- (2015) M. M. Murphy ROCK MECHANICS AND ROCK ENGINEERING
- Anisotropic Time-Dependent Modeling of Tunnel Excavation in Squeezing Ground
- (2015) Huy Tran Manh et al. ROCK MECHANICS AND ROCK ENGINEERING
- The excavation of a circular tunnel in a bedded argillaceous rock (Opalinus Clay): Short-term rock mass response and FDEM numerical analysis
- (2015) A. Lisjak et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- The impact of the physical model selection and rock mass stratification on the results of numerical calculations of the state of rock mass deformation around the roadways
- (2015) Piotr Małkowski TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Numerical investigation of arching mechanism to underground excavation in jointed rock mass
- (2015) L. He et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Validation of a three-dimensional Finite-Discrete Element Method using experimental results of the Split Hopkinson Pressure Bar test
- (2014) E. Rougier et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- A Closed-Form Solution for Tunnels with Arbitrary Cross Section Excavated in Elastic Anisotropic Ground
- (2014) Huy Tran Manh et al. ROCK MECHANICS AND ROCK ENGINEERING
- Influence of Bedding Angle on Borehole Stability: A Laboratory Investigation of Transverse Isotropic Oil Shale
- (2014) T. Meier et al. ROCK MECHANICS AND ROCK ENGINEERING
- Borehole stability analysis accounting for anisotropies in drilling to weak bedding planes
- (2013) Jincai Zhang INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Continuum–discontinuum analysis of failure mechanisms around unsupported circular excavations in anisotropic clay shales
- (2013) A. Lisjak et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Semi-Analytical Solution for Stresses and Displacements in a Tunnel Excavated in Transversely Isotropic Formation with Non-Linear Behavior
- (2013) The Manh Vu et al. ROCK MECHANICS AND ROCK ENGINEERING
- Geometry and Properties of the Excavation-Induced Fractures at the Meuse/Haute-Marne URL Drifts
- (2013) G. Armand et al. ROCK MECHANICS AND ROCK ENGINEERING
- Laboratory and In Situ Simulation Tests of the Excavation Damaged Zone Around Galleries in Opalinus Clay
- (2013) Vincent Labiouse et al. ROCK MECHANICS AND ROCK ENGINEERING
- Characteristics and mechanisms of large deformation in the Zhegu mountain tunnel on the Sichuan–Tibet highway
- (2013) Lubo Meng et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Anisotropic behaviour of stratified rock masses in tunnelling
- (2012) P. Fortsakis et al. ENGINEERING GEOLOGY
- Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist
- (2012) Jung-Woo Cho et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Numerical Modelling of the Anisotropic Mechanical Behaviour of Opalinus Clay at the Laboratory-Scale Using FEM/DEM
- (2012) Andrea Lisjak et al. ROCK MECHANICS AND ROCK ENGINEERING
- Numerical simulation of the failure mechanism of circular tunnels in transversely isotropic rock masses
- (2012) S.Y. Wang et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Y-Geo: New Combined Finite-Discrete Element Numerical Code for Geomechanical Applications
- (2012) O. K. Mahabadi et al. International Journal of Geomechanics
- Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stability
- (2011) John Coggan et al. INTERNATIONAL JOURNAL OF COAL GEOLOGY
- Analytical solution for a deep tunnel with arbitrary cross section in a transversely isotropic rock mass
- (2011) Zhizen Zhang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Physical model test and numerical analysis on the behavior of stratified rock masses during underground excavation
- (2011) Z.X. Zhang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Lined Circular Tunnels in Elastic Transversely Anisotropic Rock at Depth
- (2010) Antonio Bobet ROCK MECHANICS AND ROCK ENGINEERING
- Y-GUI: A graphical user interface and pre-processor for the combined finite-discrete element code, Y2D, incorporating material heterogeneity
- (2009) O.K. Mahabadi et al. COMPUTERS & GEOSCIENCES
- Modeling the Effects of Heterogeneity and Anisotropy on the Excavation Damaged/Disturbed Zone (EDZ)
- (2009) S. H. Wang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Modeling mechanical layering effects on stability of underground openings in jointed sedimentary rocks
- (2008) Dagan Bakun-Mazor et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Simulation of cracking near a large underground cavern in a discontinuous rock mass using the expanded distinct element method
- (2008) Yujing Jiang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Numerical study on failure mechanism of tunnel in jointed rock mass
- (2008) P. Jia et al. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
- Multi-approach back-analysis of a roof bed collapse in a mining room excavated in stratified rock
- (2007) Leandro R. Alejano et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now