Large tensile plasticity in Zr-based metallic glass/stainless steel interpenetrating-phase composites prepared by high pressure die casting

Metallic glass properties, processing method and development perspective: a review

(2021) Qayyum Halim et al.   The International Journal of Advanced Manufacturing Technology

Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility

(2021) Yunzhuo Lu et al.   ACTA MATERIALIA

Compressive properties of 3-D printed Mg–NiTi interpenetrating-phase composite: Effects of strain rate and temperature

(2021) Mingyang Zhang et al.   COMPOSITES PART B-ENGINEERING

3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency

(2020) Mingyang Zhang et al.   Science Advances

Designing new work-hardenable ductile Ti-based multilayered bulk metallic glass composites with ex-situ and in-situ hybrid strategy

(2020) Shifeng Lin et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Abnormal increase of glass forming ability under rising mold temperature in high pressure die casting

(2019) LH Liu et al.   MATERIALS LETTERS

Recent advances in novel metallic honeycomb structure

(2019) Zhonggang Wang   COMPOSITES PART B-ENGINEERING

Work-hardenable Zr-based bulk metallic glass composites reinforced with ex-situ TiNi fibers

(2019) Jie Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Stochastic deformation and shear transformation zones of the glassy matrix in CuZr-based metallic-glass composites

(2019) S.S. Jiang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

High performance Al/TiB2 composites fabricated by nanoparticle reinforcement and cutting-edge super vacuum assisted die casting process

(2019) Xixi Dong et al.   COMPOSITES PART B-ENGINEERING

Architecture of high-strength aluminum–matrix composites processed by a novel microcasting technique

(2019) Chenwei Shao et al.   NPG Asia Materials

Metal frame reinforced bulk metallic glass composites

(2019) Zu Li et al.   Materials Research Letters

Strengthening Ti-based bulk metallic glass composites containing phase transformable β-Ti via Al addition

(2019) Jinhao Zhang et al.   SCRIPTA MATERIALIA

Effect of structural heterogeneity on serrated flow behavior of Zr-based metallic glass

(2018) L.H. Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A CuZr-based bulk metallic glass composite with excellent mechanical properties by optimizing microstructure

(2018) Song-Shan Jiang et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Modulating work-hardening behaviors and tensile plasticity of in - situ formed ductile dendrite Ti-based bulk metallic glass composites with tailored dendrite composition

(2018) Dingming Liu et al.   SCRIPTA MATERIALIA

Near-Net Forming Complex Shaped Zr-Based Bulk Metallic Glasses by High Pressure Die Casting

(2018) Lehua Liu et al.   Materials

Compressive mechanical properties and failure modes of Zr-based bulk metallic glass composites containing tungsten springs

(2018) S. Chen et al.   MATERIALS & DESIGN

Determination of forming ability of high pressure die casting for Zr-based metallic glass

(2017) L.H. Liu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Serration and noise behaviors in materials

(2017) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Microstructural Control via Copious Nucleation Manipulated by In Situ Formed Nucleants: Large-Sized and Ductile Metallic Glass Composites

(2016) Wenli Song et al.   ADVANCED MATERIALS

Chaotic state to self-organized critical state transition of serrated flow dynamics during brittle-to-ductile transition in metallic glass

(2016) C. Wang et al.   JOURNAL OF APPLIED PHYSICS

Aspect ratio effects on the serration dynamics of a Zr-based bulk metallic glass

(2016) Z. F. Yao et al.   JOURNAL OF MATERIALS SCIENCE

Metallic glass matrix composites

(2016) Junwei Qiao et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

The fracture of bulk metallic glasses

(2015) B.A. Sun et al.   PROGRESS IN MATERIALS SCIENCE

Microgravity metal processing: from undercooled liquids to bulk metallic glasses

(2015) Douglas C Hofmann et al.   NPJ Microgravity

Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites

(2014) Z. Q. Liu et al.   Scientific Reports

Numerical prediction of elasto-plastic behaviour of interpenetrating phase composites by EFGM

(2013) Ankit Agarwal et al.   COMPOSITES PART B-ENGINEERING

Shear bands in metallic glasses

(2013) A.L. Greer et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Correlation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites

(2013) K. K. Song et al.   AIP Advances

Microstructural tailoring and improvement of mechanical properties in CuZr-based bulk metallic glass composites

(2012) Zengqian Liu et al.   ACTA MATERIALIA

Plasticity improvement in a bulk metallic glass composed of an open-cell Cu foam as the skeleton

(2012) H. Wang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Property evolution on annealing deformed 304 austenitic stainless steel

(2012) I. Shuro et al.   JOURNAL OF MATERIALS SCIENCE

Correlation of microstructure and tensile properties of Ti-based amorphous matrix composites modified from conventional titanium alloys

(2012) Dae Jin Ha et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ductilizing Bulk Metallic Glass Composite by Tailoring Stacking Fault Energy

(2012) Y. Wu et al.   PHYSICAL REVIEW LETTERS

Pronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment

(2012) Zengqian Liu et al.   AIP Advances

Formation of Cu–Zr–Al bulk metallic glass composites with improved tensile properties

(2011) Y. Wu et al.   ACTA MATERIALIA

Recent development and application products of bulk glassy alloys☆

(2011) A. Inoue et al.   ACTA MATERIALIA

Preparation, microstructure and deformation behavior of Zr-based metallic glass/porous SiC interpenetrating phase composites

(2011) Yongli Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Realization of high tensile ductility in a bulk metallic glass composite by the utilization of deformation-induced martensitic transformation

(2011) Choongnyun Paul Kim et al.   SCRIPTA MATERIALIA

Bulk Metallic Glass Composites with Transformation-Mediated Work-Hardening and Ductility

(2010) Yuan Wu et al.   ADVANCED MATERIALS

Plasticity of Ductile Metallic Glasses: A Self-Organized Critical State

(2010) B. A. Sun et al.   PHYSICAL REVIEW LETTERS

Mechanical properties of bulk metallic glasses

(2010) Morgana Martin Trexler et al.   PROGRESS IN MATERIALS SCIENCE

Enhanced plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass by the optimization of frictional boundary restraints

(2010) S. Scudino et al.   SCRIPTA MATERIALIA

Metallic glass fiber-reinforced Zr-based bulk metallic glass

(2010) S.T. Deng et al.   SCRIPTA MATERIALIA

Self-organized intermittent plastic flow in bulk metallic glasses

(2009) G. Wang et al.   ACTA MATERIALIA

Mg-based metallic glass/titanium interpenetrating phase composite with high mechanical performance

(2009) Y. Sun et al.   APPLIED PHYSICS LETTERS

Ta-particulate reinforced Zr-based bulk metallic glass matrix composite with tensile plasticity

(2009) Z. Zhu et al.   SCRIPTA MATERIALIA

Deformation and failure behavior of a hydrostatically extruded Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass/porous tungsten phase composite under dynamic compression

(2008) Y.F. Xue et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Designing metallic glass matrix composites with high toughness and tensile ductility

(2008) Douglas C. Hofmann et al.   NATURE

Networking amorphous phase reinforced titanium composites which show tensile plasticity

(2008) F.Q. Guo et al.   PHILOSOPHICAL MAGAZINE LETTERS