Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure

Zirconium carbide skeleton reinforced pyrocarbon composites with tunable mechanical strength, thermophysical properties and ablation resistance

(2021) Ningning Yan et al.   CORROSION SCIENCE

Micromechanical properties of pyrolytic carbon with interlayer crosslink

(2020) MingWei Chen et al.   CARBON

The role of CNT in improving the mechanical strength retention rate of C/C composites during heat treatment

(2020) Liyuan Han et al.   COMPOSITES PART B-ENGINEERING

Preparation of pore-controllable zirconium carbide ceramics with tunable mechanical strength, thermal conductivity and sound absorption coefficient

(2020) Ningning Yan et al.   CERAMICS INTERNATIONAL

Dependence of mechanical properties on microstructure of high-textured pyrocarbon prepared via isothermal and thermal gradient chemical vapor infiltration

(2020) Tiyuan Wang et al.   COMPOSITES PART B-ENGINEERING

Investigation on the ablation performance and mechanism of HfC coating modified with TaC

(2020) Guanghui Feng et al.   CORROSION SCIENCE

Effect of the curvature radius of sharp leading edge parts made of a SiC/ZrC-SiC coated C/C composite on their ablation resistance

(2020) Bo Li et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Predicting effective fracture toughness of ZrB2-based ultra-high temperature ceramics by phase-field modeling

(2020) Arezoo Emdadi et al.   MATERIALS & DESIGN

Processing and characterization of robust carbon–carbon composites from inexpensive petroleum pitch without re-impregnation process

(2019) Shishobhan Sharma et al.   COMPOSITES PART B-ENGINEERING

Low thermal conductivity and high porosity ZrC and HfC ceramics prepared by in-situ reduction reaction/partial sintering method for ultrahigh temperature applications

(2019) Heng Chen et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review

(2019) Jon Binner et al.   INTERNATIONAL MATERIALS REVIEWS

Original ArticleStructural design and ablation performance of ZrB2/MoSi2 lamsinated coating for SiC coated carbon/carbon composites

(2019) Hu Dou et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

The effects of subsonic and supersonic dissociated air flow on the surface of ultra-high-temperature HfB2-30 vol% SiC ceramics obtained using the sol-gel method

(2019) Elizaveta P. Simonenko et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

A simple route to fabricate strong boride hierarchical composites for use at ultra-high temperature

(2019) Laura Silvestroni et al.   COMPOSITES PART B-ENGINEERING

Ablation behavior of three-dimensional C f /SiC-ZrC-ZrB 2 composites prepared by a joint process of sol-gel and reactive melt infiltration

(2018) Xiaowu Chen et al.   CORROSION SCIENCE

Enhancement of convective heat transfer in smooth air channels with wall-mounted obstacles in the flow path

(2018) Younes Menni et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Vertically Grown Edge-Rich Graphene Nanosheets for Spatial Control of Li Nucleation

(2018) Qiang Song et al.   Advanced Energy Materials

Phonon localization in heat conduction

(2018) M. N. Luckyanova et al.   Science Advances

Preparation, ablation behavior and thermal retardant ability of C/C-HfB 2 -SiC composites

(2017) Jia-Ping Zhang et al.   MATERIALS & DESIGN

Erosion resistance of C/C-SiC-ZrB 2 composites exposed to oxyacetylene torch

(2016) Yue Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Significant improvement of mechanical properties of carbon/carbon composites by in situ growth of SiC nanowires

(2016) Qian-gang Fu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fluidized bed chemical vapor deposition of pyrolytic carbon-III. Relationship between microstructure and mechanical properties

(2015) Huixing Zhang et al.   CARBON

Effects of carbon nanotubes and carbon fiber reinforcements on thermal conductivity and ablation properties of carbon/phenolic composites

(2014) Joung-Man Park et al.   COMPOSITES PART B-ENGINEERING

Ablative and mechanical evaluation of CNT/phenolic composites by thermal and microstructural analyses

(2014) Zuo-Jia Wang et al.   COMPOSITES PART B-ENGINEERING

Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment

(2014) Jiaying Wang et al.   CORROSION SCIENCE

Ablative property of HfC-based multilayer coating for C/C composites under oxy-acetylene torch

(2010) Yong-Jie Wang et al.   APPLIED SURFACE SCIENCE

The catalytic effect of boric acid on polyacrylonitrile-based carbon fibers and the thermal conductivity of carbon/carbon composites produced from them

(2010) Jie Chen et al.   CARBON

Plasma wind tunnel testing of ultra-high temperature ZrB2–SiC composites under hypersonic re-entry conditions

(2010) Frederic Monteverde et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity

(2010) David W. Lipke et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers

(2009) Zhao-ke Chen et al.   APPLIED SURFACE SCIENCE

Characterization of the anisotropy of pyrolytic carbon by Raman spectroscopy

(2009) E. López-Honorato et al.   CARBON

Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites

(2008) Sufang Tang et al.   CORROSION SCIENCE