Breaking through the dynamic strength-ductility trade-off in TiB reinforced Ti composites by incorporation of graphene nanoplatelets

Achieving high performance in graphite nano-flakes reinforced titanium matrix composites through a novel reaction interface design

(2021) X.N. Mu et al.   CARBON

Embedding boron into Ti powder for direct laser deposited titanium matrix composite: Microstructure evolution and the role of nano-TiB network structure

(2021) Minhan Fang et al.   COMPOSITES PART B-ENGINEERING

The impact of matrix texture and whisker orientation on property anisotropy in titanium matrix composites: Experimental and computational evaluation

(2021) Jianwen Le et al.   COMPOSITES PART B-ENGINEERING

Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design

(2021) Liang Liu et al.   COMPOSITES PART B-ENGINEERING

A new dynamic recrystallization mechanism in adiabatic shear band of an α/β dual phase titanium alloy: Composition redistribution

(2021) Xinjie Zhu et al.   SCRIPTA MATERIALIA

Dynamic compressive mechanical properties of the spiral tungsten wire reinforced Zr-based bulk metallic glass composites

(2020) S. Chen et al.   COMPOSITES PART B-ENGINEERING

Effect of trace carbon on the dynamic compressive properties in the as-cast Ti13V11Cr3Al alloy

(2020) Duoduo Wang et al.   INTERMETALLICS

Graphene nanofillers as a player to improve the dynamic compressive response and failure behavior of carbon/epoxy composite

(2020) M Chihi et al.   NANOTECHNOLOGY

The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design – A review

(2020) Xiang Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Good strength-plasticity compatibility in graphene nanoplatelets/Ti composites by strengthening the interface bonding via in-situ formed TiB whisker

(2020) Liang Liu et al.   CERAMICS INTERNATIONAL

Effect of rotationally accelerated shot peening on the microstructure and mechanical behavior of a metastable β titanium alloy

(2020) Xinkai Ma et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm

(2020) Zhilei Dong et al.   SCRIPTA MATERIALIA

Interstitial carbon induced FCC-Ti exhibiting ultrahigh strength in a Ti37Nb28Mo28-C7 complex concentrated alloy

(2020) Shan Jiang et al.   ACTA MATERIALIA

Stress-induced martensitic transformation in a β-solution treated Ti–10V–2Fe–3Al alloy during compressive deformation

(2020) Xinkai Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The dynamic response of the metastable β titanium alloy Ti-2Al-9.2Mo-2Fe at ambient temperature

(2019) J.F. Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The failure mechanism at adiabatic shear bands of titanium alloy: High-precision survey using precession electron diffraction and geometrically necessary dislocation density calculation

(2019) Xin Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interface-induced strain hardening of graphene nanosheet/aluminum composites

(2019) Yuanyuan Jiang et al.   CARBON

In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms

(2019) Chao Cai et al.   COMPOSITES PART B-ENGINEERING

On the fracture behavior and toughness of TA15 titanium alloy with tri-modal microstructure

(2019) Zhenni Lei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The role of low angle grain boundary in deformation of titanium and its size effect

(2019) Sijing Chen et al.   SCRIPTA MATERIALIA

Titanium metal matrix composites: An overview

(2019) Muhammad D. Hayat et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The role of interfacial reaction on the dynamic mechanical response in graphene nano-flake/Ti composites

(2019) X.N. Mu et al.   CARBON

High strain rate deformation of explosion-welded Ti6Al4V/pure titanium

(2019) Yan-song Guo et al.   Defence Technology

Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/ pure titanium matrix composites

(2018) X.N. Mu et al.   CARBON

Enhanced mechanical properties of aluminum based composites reinforced by chemically oxidized carbon nanotubes

(2018) Baisong Guo et al.   CARBON

Dramatically enhanced impact toughness of two-scale laminate-network structured composites

(2018) Shuai Wang et al.   MATERIALS & DESIGN

Design novel Ti-based metallic glass matrix composites with excellent dynamic plasticity

(2018) Y.L. Tang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dependence of mechanical properties on the microstructural parameters of TA15 titanium alloy with tri-modal microstructure

(2018) P.F. Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic shear deformation and failure of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy

(2017) Chun Ran et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Shear softening of Ta-containing metallic glass matrix composites upon dynamic loading

(2017) Y.L. Tang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires

(2017) Liqing Huang et al.   SCRIPTA MATERIALIA

Back stress in strain hardening of carbon nanotube/aluminum composites

(2017) Run Xu et al.   Materials Research Letters

Capturing of the propagating processes of adiabatic shear band in Ti–6Al–4V alloys under dynamic compression

(2016) Chao Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Graphene-and-Copper Artificial Nacre Fabricated by a Preform Impregnation Process: Bioinspired Strategy for Strengthening-Toughening of Metal Matrix Composite

(2015) Ding-Bang Xiong et al.   ACS Nano

Graphene-Templated Synthesis of c-Axis Oriented Sb2Te3 Nanoplates by the Microwave-Assisted Solvothermal Method

(2015) Swati Singh et al.   CHEMISTRY OF MATERIALS

Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique

(2015) Yanjun Hao et al.   MATERIALS & DESIGN

Effects of electric pulse heat treatment on microstructures and dynamic deformation behaviors of Ti6441 alloys

(2011) Dongmei Huo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING