Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures
Authors
Keywords
Composite structures, Atomic diffusion, Micro/nano scale structure, Interface nanomechanics
Journal
COMPOSITES PART B-ENGINEERING
Volume 230, Issue -, Pages 109507
Publisher
Elsevier BV
Online
2021-11-22
DOI
10.1016/j.compositesb.2021.109507
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
- (2021) Hong-Yu Yang et al. COMPOSITES PART B-ENGINEERING
- Characterization based analysis on TiAl3 intermetallic phase layer growth phenomenon and kinetics in diffusion bonded Ti/TiAl3/Al laminates
- (2021) N. Thiyaneshwaran et al. MATERIALS CHARACTERIZATION
- Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
- (2021) Bai-Xin Dong et al. COMPOSITES PART B-ENGINEERING
- Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design
- (2021) Liang Liu et al. COMPOSITES PART B-ENGINEERING
- TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures
- (2021) Mingfu Liu et al. COMPOSITES PART B-ENGINEERING
- Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system
- (2020) Yang Li et al. ACTA MATERIALIA
- Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review
- (2020) Qun Luo et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Understanding grain refining and anti Si-poisoning effect in Al-10Si/Al-5Nb-B system
- (2020) Yang Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Friction Stir Welding of Dissimilar Materials: An Investigation of Microstructure and Nano-Indentation Study
- (2020) Raju Prasad Mahto et al. Journal of Manufacturing Processes
- Influence of Si content on interfacial reactions and mechanical properties of dual-spot laser welded-brazed Ti/Al joints
- (2020) Peng Li et al. Journal of Manufacturing Processes
- Effects of three-dimensional Cu/Nb interfaces on strengthening and shear banding in nanoscale metallic multilayers
- (2020) Y. Chen et al. ACTA MATERIALIA
- Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles
- (2020) Peng Xiao et al. COMPOSITES PART B-ENGINEERING
- In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy
- (2020) Jin Xu et al. SCRIPTA MATERIALIA
- Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys
- (2020) Yang Li et al. SCRIPTA MATERIALIA
- Effects of annealing on the interface microstructures and mechanical properties of hot roll bonded Ti6Al4V/AA6061 clad sheets
- (2020) Pengju Wang et al. Journal of Materials Research and Technology-JMR&T
- In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites
- (2020) Tianbo Yu et al. ACTA MATERIALIA
- Investigation of welding crack in laser welding-brazing welded TC4/6061 and TC4/2024 dissimilar butt joints
- (2020) Zhiwei Wang et al. Journal of Manufacturing Processes
- Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates
- (2020) Xuezheng Zhang et al. COMPOSITES PART B-ENGINEERING
- Anti-phase boundary energy of β series precipitates in Mg-Y-Nd system
- (2020) Yanlin Guo et al. SCRIPTA MATERIALIA
- Microstructure and mechanical properties of welding–brazing of Ti/Al butt joints with laser melting deposition layer additive
- (2019) Zhenglong Lei et al. Journal of Manufacturing Processes
- Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity
- (2019) Wenwen Sun et al. SCIENCE
- Interfacial microstructure and mechanical properties of Al/Ti dissimilar joints fabricated via friction stir welding
- (2019) Hongyun Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and mechanical properties of friction stir lap AA6061-Ti6Al4V welds
- (2019) Mingrun Yu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of welding parameters on interface evolution and mechanical properties of FSW Al/Ti lap joints
- (2019) Mingrun Yu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Interfacial Segregation of Alloying Elements During Dissimilar Ultrasonic Welding of AA6111 Aluminum and Ti6Al4V Titanium
- (2019) Chaoqun Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Abnormal effect of temperature on intermetallic compound layer growth at aluminum-titanium interface: The role of grain boundary diffusion
- (2019) C.Q. Zhang et al. MATERIALS LETTERS
- Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar
- (2019) Mingfu Liu et al. MATERIALS & DESIGN
- An in-situ study of the interface microstructure of solid-state additive deposition of AA7075 on AZ31B substrate
- (2019) S.K. Shaha et al. APPLIED SURFACE SCIENCE
- Role of layered structure in ductility improvement of layered Ti-Al metal composite
- (2018) Meng Huang et al. ACTA MATERIALIA
- Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys
- (2018) Yaqoob Mohsin Baqer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- TIG welding-brazing of Ti6Al4V and Al5052 in overlap configuration with assistance of zinc foil
- (2018) Haodong Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of annealing on the microstructure and mechanical properties of Ti/Al and Ti/Al/Nb laminated composites
- (2018) Robabeh Jafari et al. MATERIALS CHEMISTRY AND PHYSICS
- Dissimilar friction stir welding of pure Ti and pure Al
- (2018) Jeong-Won Choi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Thermodynamic Study on the Effect of Solute on the Nucleation Driving Force, Solid–Liquid Interfacial Energy, and Grain Refinement of Al Alloys
- (2018) Yijiang Xu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Mg on Fe–Al interface structure of hot–dip galvanized Zn–Al–Mg alloy coatings
- (2018) Yiye Xie et al. SURFACE & COATINGS TECHNOLOGY
- Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification
- (2018) F. Khodabakhshi et al. APPLIED SURFACE SCIENCE
- Solid state diffusion bonding characteristics at the interfaces of Ti and Al layers
- (2018) A.H. Assari et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate
- (2018) N. Thiyaneshwaran et al. Scientific Reports
- Interfacial microstructure and mechanical properties of Ti−6Al−4V/Al7050 joints fabricated using the insert molding method
- (2017) Hong-xiang Li et al. International Journal of Minerals Metallurgy and Materials
- Deformation behavior of brittle/ductile multilayered composites under interface constraint effect
- (2017) Hao Wu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- In-situ observation of crack initiation and propagation in Ti/Al composite laminates during tensile test
- (2017) Liang Qin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Interfacial microstructure and strengthening mechanism in Ti–6Al–4V reinforced Al-7075 alloy
- (2017) Jianian Hu et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructural characterization and mechanical properties of Al/Ti joint welded by CMT method—Assisted hybrid magnetic field
- (2017) Q.J. Sun et al. MATERIALS & DESIGN
- Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer: Microstructure characterization and mechanical properties
- (2016) X.Q. Cai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat treatment during composite extruded spring steel wire reinforced EN AW-6082
- (2016) Andreas Reeb et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets
- (2016) Hailiang Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laminated Ti-Al composites: Processing, structure and strength
- (2016) Yan Du et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of Ti and Si in the nucleation of α-Al during hot dip coating of steel with Al–43.4wt.%Zn–1.6wt.%Si alloy
- (2016) Wangjun Peng et al. SURFACE & COATINGS TECHNOLOGY
- Structural properties of Ti/Al clads manufactured by explosive welding and annealing
- (2016) D.M. Fronczek et al. MATERIALS & DESIGN
- Explosively welded multilayer Ti-Al composites: Structure and transformation during heat treatment
- (2016) D.V. Lazurenko et al. MATERIALS & DESIGN
- Atomic-scale pathway of early-stage precipitation in Al–Mg–Si alloys
- (2015) Vahid Fallah et al. ACTA MATERIALIA
- Characterization of debonding strength in steel-wire-reinforced aluminum and its influence on material fracture
- (2015) A. Morasch et al. ENGINEERING FRACTURE MECHANICS
- Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061
- (2015) Aiping Wu et al. MATERIALS & DESIGN
- Morphology and formation of Fe–Al intermetallic layers on iron hot-dipped in Al–Mg–Si alloy melt
- (2014) Naoki Takata et al. INTERMETALLICS
- An investigation on bonding mechanism and mechanical properties of Al/Ti compound materials prepared by insert moulding
- (2014) X.Y. Nie et al. MATERIALS & DESIGN
- Asymmetric accumulative roll bonding of aluminium–titanium composite sheets
- (2013) Hoi Pang Ng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the kinetics of TiAl3 intermetallic layer formation in the titanium and aluminum diffusion couple
- (2012) Mostafa Mirjalili et al. INTERMETALLICS
- Growth kinetics of TiAl3 layer in multi-laminated Ti–(TiB2/Al) composite sheets during annealing treatment
- (2012) Xiping Cui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of the thermal route on the peak-aged microstructures in an Al–Mg–Si aluminum alloy
- (2012) S. Pogatscher et al. SCRIPTA MATERIALIA
- Structural and mechanical properties of metallic–intermetallic laminate composites produced by explosive welding and annealing
- (2011) I.A. Bataev et al. MATERIALS & DESIGN
- Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti6Al4V and Al4Cu1Mg
- (2011) Zhipeng Ma et al. ULTRASONICS SONOCHEMISTRY
- Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process
- (2010) Shuhai Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Interface Atomic-Scale Structure and its Impact on Quantum Electron Transport
- (2009) Zhongchang Wang et al. ADVANCED MATERIALS
- Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint
- (2009) J.L. Song et al. JOURNAL OF ALLOYS AND COMPOUNDS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation