Achieving high strength and toughness by engineering 3D artificial nacre-like structures inTi6Al4V-Ti metallic composite

Hierarchical refinement of nickel-microalloyed titanium during additive manufacturing

(2021) Zhihui Xiong et al.   SCRIPTA MATERIALIA

Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank’s solution

(2021) P. Qin et al.   CORROSION SCIENCE

Non-layer-wise fracture and deformation mechanism in beta titanium cubic lattice structure manufactured by selective laser melting

(2021) Y.J. Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying

(2021) Yeon Beom Jeong et al.   COMPOSITES PART B-ENGINEERING

Strong and plastic metallic composites with nanolayered architectures

(2020) Z.H. Cao et al.   ACTA MATERIALIA

Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary

(2020) Yanjin Lu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Controlling the tensile and fatigue properties of selective laser melted Ti–6Al–4V alloy by post treatment

(2020) Chenyu Su et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

(2020) Zhi-Jie Hu et al.   SCRIPTA MATERIALIA

Selective laser melting of Ti6Al4V: Effect of laser re-melting

(2020) J. Karimi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying

(2020) Ilya Vladimirovich Okulov et al.   SCRIPTA MATERIALIA

Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling

(2019) Hak Hyeon Lee et al.   ACTA MATERIALIA

Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase

(2019) Amy Wat et al.   Nature Communications

High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications

(2019) Wangchang Li et al.   ACTA MATERIALIA

In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms

(2019) Chao Cai et al.   COMPOSITES PART B-ENGINEERING

Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel

(2019) S. Irukuvarghula et al.   ACTA MATERIALIA

Composite 3D printing for the small size unmanned aerial vehicle structure

(2019) Andrey V. Azarov et al.   COMPOSITES PART B-ENGINEERING

Impact-resistant nacre-like transparent materials

(2019) Z. Yin et al.   SCIENCE

Plastic deformation induced hexagonal-close-packed nickel nano-grains

(2019) Z.P. Luo et al.   SCRIPTA MATERIALIA

Nature‐Inspired Nacre‐Like Composites Combining Human Tooth‐Matching Elasticity and Hardness with Exceptional Damage Tolerance

(2019) Guoqi Tan et al.   ADVANCED MATERIALS

Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix

(2019) Lorena Cristina Miranda Barbosa et al.   COMPOSITES PART B-ENGINEERING

Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures

(2019) Nanya Li et al.   COMPOSITES PART B-ENGINEERING

A study of size effects in bioinspired, “nacre-like”, metal-compliant-phase (nickel-alumina) coextruded ceramics

(2018) Ryan P. Wilkerson et al.   ACTA MATERIALIA

A micromechanical study of stress concentrations in composites

(2018) Hossein Ghayoor et al.   COMPOSITES PART B-ENGINEERING

Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study

(2018) Haoqi Zhang et al.   COMPOSITES PART B-ENGINEERING

Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters

(2018) I.V. Okulov et al.   SCRIPTA MATERIALIA

Dealloying-based metal-polymer composites for biomedical applications

(2018) A.V. Okulov et al.   SCRIPTA MATERIALIA

Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting

(2018) Y.J. Liu et al.   SCRIPTA MATERIALIA

Bioinspired, Multiscale Reinforced Composites with Exceptionally High Strength and Toughness

(2018) Ningning Song et al.   NANO LETTERS

Bioinspired Ultrasensitive and Stretchable MXene-Based Strain Sensor via Nacre-Mimetic Microscale “Brick-and-Mortar” Architecture

(2018) Xinlei Shi et al.   ACS Nano

Internal damage evaluation of composite structures using phased array ultrasonic technique: Impact damage assessment in CFRP and 3D printed reinforced composites

(2018) M.A. Caminero et al.   COMPOSITES PART B-ENGINEERING

Bioinspired, Graphene/Al2O3 Doubly Reinforced Aluminum Composites with High Strength and Toughness

(2017) Yunya Zhang et al.   NANO LETTERS

Atomistic Origin of Deformation Twinning in Biomineral Aragonite

(2017) Jialin Liu et al.   PHYSICAL REVIEW LETTERS

Characterization of Prealloyed Ti–6Al–4V Powders from EIGA and PREP Process and Mechanical Properties of HIPed Powder Compacts

(2017) Rui-Peng Guo et al.   Acta Metallurgica Sinica-English Letters

Dealloying-based interpenetrating-phase nanocomposites matching the elastic behavior of human bone

(2017) I. V. Okulov et al.   Scientific Reports

A Novel Approach to Developing Biomimetic (“Nacre-Like”) Metal-Compliant-Phase (Nickel-Alumina) Ceramics through Coextrusion

(2016) Ryan P. Wilkerson et al.   ADVANCED MATERIALS

Robust Underwater Oil-Repellent Material Inspired by Columnar Nacre

(2016) Tianqi Guo et al.   ADVANCED MATERIALS

Synthetic nacre by predesigned matrix-directed mineralization

(2016) L.-B. Mao et al.   SCIENCE

A novel near α-Ti alloy prepared by hot isostatic pressing: Microstructure evolution mechanism and high temperature tensile properties

(2016) Chao Cai et al.   MATERIALS & DESIGN

Development and application of a novel precession electron diffraction technique to quantify and map deformation structures in highly deformed materials—as applied to ultrafine-grained titanium

(2014) Iman Ghamarian et al.   ACTA MATERIALIA

Hidden energy dissipation mechanism in nacre

(2014) Zaiwang Huang et al.   JOURNAL OF MATERIALS RESEARCH

Mechanical behavior and tensile/compressive strength asymmetry of ultrafine structured Ti–Nb–Ni–Co–Al alloys with bi-modal grain size distribution

(2014) I.V. Okulov et al.   MATERIALS & DESIGN

On the development of ice-templated silicon carbide scaffolds for nature-inspired structural materials

(2013) Valentina Naglieri et al.   ACTA MATERIALIA

Origin of flaw-tolerance in nacre

(2013) Zaiwang Huang et al.   Scientific Reports

Uncovering Aragonite Nanoparticle Self-assembly in Nacre—A Natural Armor

(2012) Gangsheng Zhang et al.   CRYSTAL GROWTH & DESIGN

Order-Disorder Transition of Aragonite Nanoparticles in Nacre

(2012) Zaiwang Huang et al.   PHYSICAL REVIEW LETTERS

In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti–6Al–4V by yttrium hydride

(2012) M. Yan et al.   SCRIPTA MATERIALIA

Aligned carbon nanotube-reinforced silicon carbide composites produced by chemical vapor infiltration

(2011) Zhanjun Gu et al.   CARBON

The conflicts between strength and toughness

(2011) Robert O. Ritchie   NATURE MATERIALS

On the Fracture Toughness of Advanced Materials

(2009) Maximilien E. Launey et al.   ADVANCED MATERIALS

Unveiling the Formation Mechanism of Pseudo-Single-Crystal Aragonite Platelets in Nacre

(2009) Xiaodong Li et al.   PHYSICAL REVIEW LETTERS