Performance and mechanism evaluation during milling of CFRP laminates under cryogenic-based conditions

Characterization of the cutting forces and friction behavior in machining UD-CFRP using slot milling test

(2021) Jamal Sheikh-Ahmad et al.   The International Journal of Advanced Manufacturing Technology

Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based Metal Working Fluids

(2021) K.C. Wickramasinghe et al.   JOURNAL OF CLEANER PRODUCTION

Development of dynamic constitutive model of epoxy resin considering temperature and strain rate effects using experimental methods

(2021) Luo Gang et al.   MECHANICS OF MATERIALS

Tribological properties and tool wear in milling of in-situ TiB2/7075 Al composite under various cryogenic MQL conditions

(2021) Jie Chen et al.   TRIBOLOGY INTERNATIONAL

Mechanism and feasibility study of low frequency vibration assisted drilling of a newly developed CFRP/Al co-cured material

(2021) Fan Zou et al.   Journal of Manufacturing Processes

Damage behaviors of unidirectional CFRP in orthogonal cutting: A comparison between single- and multiple-pass strategies

(2020) Hao Nan Li et al.   COMPOSITES PART B-ENGINEERING

Heat partition in edge trimming of fiber reinforced polymer composites

(2020) Jamal Sheikh-Ahmad et al.   JOURNAL OF COMPOSITE MATERIALS

Hole quality and tool wear when dry drilling of a new developed metal/composite co-cured material

(2020) Fan Zou et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

UV-to-IR Highly Transparent Ultrwathin Diamond Nanofilms with Intriguing Performances: Anti-fogging, Self-cleaning and Self-lubricating

(2020) Lei Huang et al.   APPLIED SURFACE SCIENCE

Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs Cryogenic

(2020) Dhiraj Kumar et al.   COMPOSITE STRUCTURES

Machining of SiC Ceramic Matrix Composites: A Review

(2020) Qinglong An et al.   Chinese Journal of Aeronautics

Investigation on the cutting responses of CFRP/Ti stacks: with special emphasis on the effects of drilling sequences

(2020) Qinglong An et al.   COMPOSITE STRUCTURES

Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques

(2020) Prassan Shah et al.   TRIBOLOGY INTERNATIONAL

Hole Exit Quality and Machined Surface Integrity of 2D Cf/SiC Composites Drilled by PCD tools

(2019) Jie Chen et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools

(2019) Fan Zou et al.   CERAMICS INTERNATIONAL

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

(2019) Jinyang Xu et al.   COMPOSITE STRUCTURES

Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates

(2019) Qinglong An et al.   COMPOSITE STRUCTURES

Experimental investigation on mechanical drilling of a newly developed CFRP/Al co-cured material

(2019) Jiaqiang Dang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study

(2018) Sezer Morkavuk et al.   COMPOSITES PART B-ENGINEERING

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

(2018) Jianzhang Xiao et al.   MACHINING SCIENCE AND TECHNOLOGY

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining

(2018) Erween Abd Rahim et al.   MEASUREMENT

Thermal aspects in machining CFRPs: effect of cutter type and cutting parameters

(2018) J. Y. Sheikh-Ahmad et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

CRYOGENIC DRILLING OF CARBON FIBER-REINFORCED COMPOSITE (CFRP)

(2018) UĞUR KOKLU et al.   SURFACE REVIEW AND LETTERS

Tribological behaviors of the diamond films sliding against the T800/X850 CFRP laminates

(2018) Xinchang Wang et al.   WEAR

Experimental study on effects of fiber cutting angle in milling of high-strength unidirectional carbon fiber–reinforced polymer laminates

(2017) Changying Wang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Temperature effect on the mechanical properties of carbon, glass and carbon–glass FRP laminates

(2015) Rami A. Hawileh et al.   CONSTRUCTION AND BUILDING MATERIALS

Flow visualization and characterization for optimized MQL machining of composites

(2014) Y. Iskandar et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks

(2013) M. Montoya et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Temperature measurement of cutting tool and machined surface layer in milling of CFRP

(2013) Takeshi Yashiro et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP

(2013) JianGuo Zhang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Rough turning Inconel 750 with supercritical CO2-based minimum quantity lubrication

(2013) D.A. Stephenson et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites

(2012) Sein Leung Soo et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY