Article
Nanoscience & Nanotechnology
Shuhui Liu, Zibo Cao, Yu Meng, Yajie Li, Weimin Yang, Zheng Chang, Wen Liu, Xiaoming Sun
Summary: Aluminum-air batteries have gained attention due to their high energy density and low cost, but lack of high-performance air cathode hinders commercial application. Research shows that an aerophilic air cathode with high catalytic activity and large three-phase interface demonstrates high onset potential and fast current increase during oxygen reduction reaction, with better stability.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Chao Zhang, Jianxue Liu, Yue Zhang, Wenwen Yang, Huimin Lu
Summary: The performance of Al-air batteries, particularly in cold environments, has remained stagnant due to sluggish air cathode reactions. To address this issue, aqueous Al-air batteries were explored with an efficient catalyst for application under low temperature. Cu1Cop-N-C, synthesized by carbonization of Cu, Co co-doped ZIF-8 combined with MWCNTs, exhibited high oxygen reduction activities due to the synergistic effect in Cu1-Cop active sites and its unique 1D-3D porous nanostructure. Al-air batteries with Cu1Cop-N-C demonstrated remarkable performance in a wide service temperature range (-40-50 degrees C), providing a high start voltage of 0.7 V and a peak power density of about 16.58 mW cm-2 at -40 degrees C. It is anticipated that these metal single atoms with neighbored heterogeneous metallic particles could have broader applications in diverse energy conversion and storage fields.
APPLIED SURFACE SCIENCE
(2023)
Article
Engineering, Environmental
Yibo Wang, Kaiqi Li, Ruiqi Cheng, Qingyue Xue, Fei Wang, Zhaohui Yang, Pengyu Meng, Min Jiang, Jiao Zhang, Chaopeng Fu
Summary: FePc molecules anchored on Co single atoms/N-doped porous carbon nanofibers (FePc@Co-SAs/PCNF) were prepared for enhanced electronic interaction in oxygen reduction reactions (ORR). XAS analysis confirmed the atomically dispersed Fe and Co sites, showing improved ORR performance. The in-situ Raman spectra recorded the electrocatalytic ORR processes on FePc@Co-SAs/PCNF, with remarkable discharge performance in AABs. This study offers a new strategy for designing metallic macrocyclic compound electrocatalysts and promotes the development of metal-air batteries.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Zhi-yuan Mei, Sheng Cai, Genfu Zhao, Xiaoxiao Zou, Yao Fu, Jingwen Jiang, Qi An, Mian Li, Tingting Liu, Hong Guo
Summary: A non-contact scheme is designed to improve the ORR performance of iron phthalocyanine (FePc) by inducing electron localization around the Fe-N site, enhancing oxygen adsorption capacity and accelerating the ORR rate. The catalyst shows promising activity and stability in alkaline medium.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Wenqing Wang, Kun Rui, Kaili Wu, Yisha Wang, Longwei Ke, Xin Wang, Feng Xu, Yan Lu, Jixin Zhu
Summary: This study demonstrates a successful method of achieving highly dispersed iron atoms on a carbon framework through molecular bridging, resulting in excellent electrocatalytic performance for zinc-air batteries.
CHEMISTRY-A EUROPEAN JOURNAL
(2022)
Article
Nanoscience & Nanotechnology
Kaiqi Li, Ruiqi Cheng, Qingyue Xue, Tianshuo Zhao, Fei Wang, Chaopeng Fu
Summary: In this work, heterostructural Co/MnO nanoparticles encapsulated in a N-doped carbon electrocatalyst were prepared via one-step pyrolysis. The interfacial synergy of a Co/MnO Mott-Schottky (M-S) heterostructure leads to boosted conductivity, formation of an M-S barrier, and a reduced oxygen reduction energy barrier for excited electrons, resulting in Pt/C competitive oxygen reduction reaction (ORR) performance. Furthermore, the Co/MnO-based aluminum-air battery displays good discharge performance, demonstrating good feasibility for practical application.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Nanoscience & Nanotechnology
Fengjiao Li, Naveed Mushtaq, Tong Su, Yanhui Cui, Jiajia Huang, Mingjuan Sun, Manish Singh, Xiaolin Zhao, Kristina Maliutina, Yu Zhang, Chuanxin He, Ming Yang, Bin Zhu, Liangdong Fan
Summary: In this study, a unique hybrid catalyst composed of nitrogen-doped carbon nanotube (NCNT) grown on La0.8Sr0.2Ti0.65Fe0.35O3-delta perovskite oxide (LSTFO/NCNT) was developed as a bifunctional ORR and OER electrocatalyst for zinc-air batteries. The optimized LSTFO/NCNT hybrid exhibited outstanding bifunctional oxygen electrocatalysis performances with a characteristic potential gap (Delta E) of 0.76 V. The homemade zinc-air batteries using LSTFO/NCNT as an air electrode catalyst demonstrated reliable electrochemical performances with high peak power density and cycling stability, achieving a final round-trip efficiency of 62.8% at 10 mA cm(-2) during 123 cycles.
MATERIALS TODAY NANO
(2023)
Article
Chemistry, Physical
Linlin Ma, Xiao Hu, Yuan Min, Xinyu Zhang, Wujun Liu, Paul Kwan Sing Lam, Molly Meng Jung, Raymond Jianxiong Zeng, Ruquan Ye
Summary: The development of new green technologies for chemical and material production is driven by the need to combat global warming. Microalgae can convert CO2 into biofuels, making them important for carbon neutrality. This study demonstrates that microalgae biomass can be upgraded into single-atom site catalysts with high oxygen reduction reaction (ORR) activity. The resulting catalysts show remarkable stability and resistance to poisoning, and outperform commercial catalysts in a zinc-air battery. The research offers a sustainable pathway for converting CO2-capture biomass into high-performance catalysts, addressing environmental and energy concerns simultaneously.
Article
Chemistry, Physical
Jie Wang, Aimin Wu, Zhiwen Qiu, Aikui Li, Wenjun Qin, Hao Huang
Summary: The development and design of low-cost and efficient cathode catalysts for high electrochemical performance aluminum-air batteries is of great significance. Here, nitrogen-doped carbon nanotube supported Fe/Ce bimetallic catalysts were synthesized by chemical vapor deposition. The Fe/Ce-NCNT-0.2 catalyst showed excellent oxygen reduction reaction ability in alkaline media and the assembled Al-air battery exhibited high performance, indicating great commercial potential.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Heping Yu, Hui Zhang, Zhongyi Zhang
Summary: The study demonstrates that simple surface treatment and modification of N, P dual-doped porous carbon can effectively enhance the catalytic performance of oxygen reduction reaction (ORR), leading to improved battery performance.
Article
Chemistry, Physical
Lingbo Zong, Fenghong Lu, Wenjun Zhang, Kaicai Fan, Xin Chen, Bernt Johannessen, Dongchen Qi, Nicholas M. Bedford, Mark Warren, Carlo U. Segre, Porun Liu, Lei Wang, Huijun Zhao
Summary: This study successfully anchored manganese single atoms (SAs) onto graphene nanosheets using a combined sol-gel/carbonization approach, forming Mn-SA@CNSs with superior alkaline ORR electrocatalytic activity. The hybrid coordination approach demonstrated in this work can effectively reduce the energy barrier of ORR activity and enhance ORR activity.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Analytical
Na Xu, Longjiao Yu, Jiyuan Zhang, Jingdong Feng, Lina Zhao
Summary: By engineering A-site deficiency, the electrocatalytic activity of La0.4Sr0.6Co0.7Fe0.2Nb0.1O3-delta perovskite for ORR is enhanced, leading to improved electrochemical performances in aluminum-air batteries.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
(2022)
Article
Energy & Fuels
Xiaoke Zhang, Qianfeng Liu, Zhao Yan, Shimin Liu, Erdong Wang
Summary: In this study, CuO/Co3O4@CNTs catalysts were successfully prepared for bifunctional oxygen electrocatalysts using a facile and scalable coprecipitation strategy. This unique strategy allowed the uniform growth of CuO/Co3O4 nanoparticles on CNTs and the simultaneous pyrolysis process resulted in the generation of ultrafine CuO/Co3O4 heterostructures. Due to an abundance of heterostructures, oxygen vacancies and unsaturated chemical bonds were generated in CuO/Co3O4. As a result, CuO/Co3O4@CNTs exhibited bifunctional activity with a Delta E of 0.78 V and good stability, maintaining 1000 hours of charge and discharge cycles.
JOURNAL OF ENERGY STORAGE
(2023)
Article
Chemistry, Physical
Daxiang Xue, Fengjiao Yu, Qi Ying, Yufei Wu, Woo-Jae Lee, Se-Hun Kwon, Yang Yang
Summary: A high-performance Fe2P/FeP-PNC catalyst was designed through phosphate-regulated synthesis, showing excellent ORR performance and stability in alkaline media. The catalyst exhibited a higher half-wave potential and smaller shift after stability test compared to commercial Pt/C under alkaline conditions. It also displayed good performance in acidic media. Using Fe2P/FeP-PNC as cathodes, a Zn-air battery and a PEMFC achieved high power density in either alkaline or acidic electrolytes.
Article
Chemistry, Multidisciplinary
Zepan Wang, Jiahui Huang, Ling Wang, Yangyang Liu, Wenhui Liu, Shenlong Zhao, Zhao-Qing Liu
Summary: In this study, the structures of spinel oxides were tailored through a simple solvent method, and ACo2O4/NCNTs composites were synthesized for oxygen electrocatalysis. The optimized MnCo2O4/NCNTs demonstrated high activity and durability, showing great potential for application in zinc-air batteries. Density functional theory calculations revealed that substitutions can modulate the charge structure and improve the oxygen electrocatalytic performance.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Multidisciplinary
Yong Gao, Qinghe Cao, Jie Pu, Xin Zhao, Gangwen Fu, Jipeng Chen, Yuxuan Wang, Cao Guan
Summary: A triple-gradient electrode for dendrite-free Zn anode was constructed through a simple mechanical rolling-induced design, which effectively optimized the Zn2+ ion flux and achieved bottom-up deposition behavior, thereby preventing short circuit and improving cycle life and stability.
ADVANCED MATERIALS
(2023)
Article
Engineering, Electrical & Electronic
Abdelnaby M. M. Elshahawy, Saeid M. M. Elkatlawy, Mustafa S. S. Shalaby, Cao Guan, John Wang
Summary: This study developed an efficient surface engineering process to enhance the pseudocapacitive performance of rutile TiO2 nanorods. By establishing surface-engineered TiO2 nanorod arrays on carbon cloth, the researchers achieved high specific capacitance, excellent rate capability, and long cycle life.
JOURNAL OF ELECTRONIC MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Xi Xu, Gangwen Fu, Yuxuan Wang, Qinghe Cao, Yanran Xun, Chen Li, Cao Guan, Wei Huang
Summary: A 3D-printed Ni electrode with a designed periodic structure and surface chemistry facilitates rapid bubble generation and emission, yielding a high electrochemically active surface area. By loading with MoNi4 and NiFe layered double hydroxide active materials, the electrode achieves high current densities for hydrogen and oxygen evolution reactions. An all-3D-printed alkaline electrolyzer exhibits stable performance for clean energy production over a long period of time.
Article
Chemistry, Multidisciplinary
Xi Xu, Junjie Du, Qinghe Cao, Danwei Zhang, Chen Li, Gangwen Fu, Yong Gao, Jiayu Yang, Cao Guan, Wei Huang
Summary: The key to utilizing graphene for large-scale industrial applications lies in the 3D construction of 2D sheets. By using a layer-by-layer approach in additive manufacturing, 3D graphene structures with excellent mechanical flexibility can be fabricated. The demonstrated 3D nitrogen-doped graphene (NG) foams, created via 3D printed templates and template-directed chemical vapor deposition, exhibit exceptional mechanical and functional properties, including super-elasticity, low density, fast charge carrier transport, and temperature-invariant reversible elasticity.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Lanze Li, Qinghe Cao, Yitian Wu, Yu Zheng, Hongxuan Tang, Jiujiu Ge, Mengdi Liang, Bao Zhou, Baiyu Jiang, Sai Wu, Fan Wang, Yajun Pang, Zhehong Shen, Cao Guan, Hao Chen
Summary: A novel wood-derived cathode with continuously oriented three-phase interfacial channels is developed to improve the performance of hybrid zinc batteries. The wood chip is carbonized and loaded with a hydrophilic active material to facilitate reaction dynamics. The resulting hybrid battery exhibits a wide operating voltage range, superior specific capacity, excellent energy density, and good durability.
ADVANCED MATERIALS
(2023)
Review
Chemistry, Multidisciplinary
Junjie Du, Gangwen Fu, Xi Xu, Abdelnaby M. Elshahawy, Cao Guan
Summary: This article reviews the latest developments and applications of 3D printed graphene-based metamaterials. It discusses the structure design and fabrication strategies of different types of metamaterials. It also explores the introduction of multi-functionality through 3D printed graphene-based materials.
Article
Chemistry, Multidisciplinary
Fan Bu, Yong Gao, Qiangzheng Wang, Yuxuan Wang, Chun Li, Jiayu Yang, Xiangye Liu, Cao Guan
Summary: In this study, a high-performance flexible solid-state Zn-ion battery with a unique heterostructure electrolyte was successfully fabricated through an ultraviolet-assisted printing strategy. The heterostructure electrolyte not only isolates water molecules and optimizes electric field distribution, but also facilitates fast Zn2+ transport in the cathode. The battery exhibits high capacity, long cycling life, and stable operation under various conditions.
Review
Chemistry, Multidisciplinary
Zeyu Geng, Ting Meng, Fei Ma, Wencheng Qin, Xiaohan Wang, Haifeng Zhang, Gao Guan
Summary: This review summarizes the recent progress in the application of dual-functional electrodes in LiS cells, covering the selection of host materials and design methods. The potential of different materials, such as carbon-based materials, single-atom catalysts, transition metal compounds, heterostructure hybrids, and polymers, as dual-functional electrodes is discussed. The design principles and prospects for future research and commercial application are proposed.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Yuxuan Wang, Yong Gao, Junyuan He, Jiayu Yang, Gangwen Fu, Qinghe Cao, Jie Pu, Fan Bu, Xi Xu, Cao Guan
Summary: In this study, a sphere-confined reversible zinc deposition behavior was achieved by using the Kirkendall effect to form bi-continuous ZnO-protected interconnected and hollowed Zn microspheres. The resulting alkaline zinc-based batteries showed high rechargeability and zinc utilization ratio, making them suitable for high current density and high depth of discharge applications.
ADVANCED MATERIALS
(2023)
Review
Chemistry, Multidisciplinary
Junyuan He, Leiqing Cao, Jiaojiao Cui, Gangwen Fu, Ruiyi Jiang, Xi Xu, Cao Guan
Summary: The field of flexible electronics is important for technological advancement and has a strong connection to human life, especially in areas such as wearable devices and healthcare. Flexible energy storage devices (FESDs) are urgently needed to meet the energy storage needs of various flexible products. This review introduces the application scenarios of FESDs and summarizes the main representative devices used in different fields. It also discusses the challenges hindering the practical application of FESDs.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Jie Pu, Qinghe Cao, Yong Gao, Qiangzheng Wang, Zeyu Geng, Leiqing Cao, Fan Bu, Nute Yang, Cao Guan
Summary: This study reports on the development of a stable and stretchable fibrous Zn-ion battery utilizing liquid metal fibers as the anode. The battery showed superior performance even under stretching and could seamlessly integrate with sensors, heaters, and wireless charging devices, making it promising for the application of wearable multifunctional electronic textiles.
ADVANCED MATERIALS
(2023)
Article
Geosciences, Multidisciplinary
Chen Zhu, Alan E. Fryar, John Apps
Summary: Research in hydrogeochemistry has made significant progress in the past two decades, including arsenic contamination in groundwater, the use of isotopic and chemical tracers, chemical reaction kinetics, and the transformation of geochemical modeling. In the future, advancements in technology such as machine learning, cyberinfrastructure, and isotope analytical tools will enable breakthrough research and enhance the role of hydrogeochemistry in addressing climate change and the transition to renewable energies.
Article
Chemistry, Multidisciplinary
Ting Meng, Fei Ma, Yong Gao, Zeyu Geng, Xiaohan Wang, Jipeng Chen, Haifeng Zhang, Cao Guan
Summary: Lithium metal-based rechargeable batteries have the potential for high capacity and energy density, but dendrite growth poses a major problem. In this study, a functionalized and laminated scaffold has been designed to inhibit dendrite growth and achieve stable lithium plating/stripping. The scaffold shows excellent electrochemical performance in lithium-ion batteries and provides valuable insights for high-performance lithium metal anodes.
Article
Chemistry, Physical
Jiayu Yang, Xi Xu, Yong Gao, Yuxuan Wang, Qinghe Cao, Jie Pu, Fan Bu, Ting Meng, Cao Guan
Summary: This study reports an ultra-stable zinc powder-based anode, constructed by coating a conformal ion-conductive hydrogel layer on 3D-printed zinc scaffolds. The interconnected hydrogel effectively redistributes the zinc ion flux and homogenizes the surface electric field, while the 3D architecture alleviates the stress from volume change at high current densities/capacities. As a result, the 3D zinc powder-based symmetric cell demonstrates stable performance for over 4700 hours (>6 months) at a high current density/capacity of 5 mA cm(-2)/5 mAh cm(-2), surpassing previously reported zinc powder-based anodes and bare zinc foil, offering a promising route for practical applications of low-cost and large-scale zinc-ion batteries.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Xin Zhao, Yong Gao, Qinghe Cao, Fan Bu, Jie Pu, Yuxuan Wang, Cao Guan
Summary: A free-standing Zn powder-based anode with gradient particle size and porosity is constructed for flexible Zn-ion batteries, which effectively suppresses dendrite growth and improves the cycle stability and lifespan of the battery.
ADVANCED ENERGY MATERIALS
(2023)
Article
Engineering, Environmental
Xinping Zhang, Yuxin Guo, Xiaoyang Liu, Shun-Yu Wu, Ya-Xuan Zhu, Shao-Zhe Wang, Qiu-Yi Duan, Ke-Fei Xu, Zi-Heng Li, Xiao-Yu Zhu, Guang-Yu Pan, Fu-Gen Wu
Summary: This study develops a nanotrigger HCFT for simultaneous photodynamic therapy and light-triggered ferroptosis therapy. The nanotrigger can relieve tumor hypoxia, induce enhanced photodynamic reaction, and facilitate the continuation of Fenton reaction, ultimately leading to lethal ferroptosis in tumor cells.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Olumide Bolarinwa Ayodele, Toyin Daniel Shittu, Olayinka S. Togunwa, Dan Yu, Zhen-Yu Tian
Summary: This study focused on the semihydrogenation of acetylene in an ethylene-rich stream using two alloyed Pt catalysts PtCu and PtCo. The PtCu catalyst showed higher activity and ethylene yield compared to PtCo due to its higher unoccupied Pt d-orbital density. This indicates that alloying Pt with Cu is more promising for industrial relevant SHA catalyst.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Guowei Chen, Wen-Cheng Chen, Yaozu Su, Ruicheng Wang, Jia-Ming Jin, Hui Liang, Bingxue Tan, Dehua Hu, Shaomin Ji, Hao-Li Zhang, Yanping Huo, Yuguang Ma
Summary: This study proposes an intramolecular dual-locking design for organic luminescent materials, achieving high luminescence efficiency and performance for deep-blue organic light-emitting diodes. The material also exhibits unique mechanochromic luminescence behavior and strong fatigue resistance.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Joren van Stee, Gregory Hermans, Jinu Joseph John, Koen Binnemans, Tom Van Gerven
Summary: This work presents a continuous solvent extraction method for the separation of cobalt and nickel in a millifluidic system using Cyphos IL 101 (C101) as the extractant. The optimal conditions for extraction performance and solvent properties were determined by investigating the effects of channel length, flow rate, and temperature. The performance of a developed manifold structure was compared to a single-channel system, and excellent separation results were achieved. The continuous separation process using the manifold structure resulted in high purity cobalt and nickel products.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Yan Xu, Jingai Jiang, Xinyi Lv, Hui Li, Dongliang Yang, Wenjun Wang, Yanling Hu, Longcai Liu, Xiaochen Dong, Yu Cai
Summary: A programmed gas release nanoparticle was developed to address the challenges in treating diabetic infected wounds. It effectively removes drug-resistant pathogens and remodels the wound microenvironment using NO and H2S. The nanoparticle can eliminate bacteria and promote wound healing through antibacterial and anti-inflammatory effects.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Tong Xia, Zhilin Xi, Lianquan Suo, Chen Wang
Summary: This study investigated a highly efficient coal dust suppressant with low initial viscosity and high adhesion-solidification properties. The results demonstrated that the dust suppressant formed a network of multiple hydrogen bonding cross-linking and achieved effective adhesion and solidification of coal dust through various chemical reactions.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Jinzhi Cai, Zhenshan Li
Summary: A density functional theory-based rate equation was developed to predict the gas-solid reaction kinetics of CaO carbonation with CO2 in calcium looping. The negative activation energy of CaO carbonation close to equilibrium was accurately predicted through experimental validation.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Jianxiong Chen, Fuhao Ren, Ningning Yin, Jie Mao
Summary: This study presents an economically efficient and easily implementable surface modification approach to enhance the high-temperature electrical insulation and energy storage performance of polymer dielectrics. The self-assembly of high-insulation-performance boron nitride nanosheets (BNNS) on the film surface through electrostatic interactions effectively impedes charge injection from electrodes while promoting charge dissipation and heat transfer.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Zijian Li, Zhaohui Yang, Shao Wang, Hongxia Luo, Zhimin Xue, Zhenghui Liu, Tiancheng Mu
Summary: This study reports a strategy for upgrading polyester plastics into value-added chemicals using electrocatalytic methods. By inducing the targeted transfer of *OH species, polyethylene terephthalate was successfully upgraded into potassium diformate with high purity. This work not only develops an excellent electrocatalyst, but also provides guidance for the design of medium entropy metal oxides.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Navneet Singh Shekhawat, Surendra Kumar Patra, Ashok Kumar Patra, Bamaprasad Bag
Summary: This study primarily focuses on developing a sulphur dyeing process at room temperature using bacterial Lysate, which is environmentally friendly, energy and cost effective, and sustainable. The process shows promising improvements in dye uptake and fastness properties.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Dengjia Shen, Hongyang Ma, Madani Khan, Benjamin S. Hsiao
Summary: This study developed cationic PVC nanofibrous membranes with high filtration and adsorption capability for the removal of bacteria and hexavalent chromium ions from wastewater. The membranes demonstrated remarkable performance in terms of filtration efficiency and maximum adsorption capacity. Additionally, modified nanofibrous membranes were produced using recycled materials and showed excellent retention rates in dynamic adsorption processes.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Xiaoyan Wang, Zhikun Wang, Ben Jia, Chunling Li, Shuangqing Sun, Songqing Hu
Summary: Inspired by photosystem II, self-supported Fe-doped NiCoP nanowire arrays modified with carboxylate were constructed to boost industrial-level overall water splitting by employing the concerted proton-coupled electron transfer mechanism. The introduction of Fe and carboxyl ligand led to improved catalytic activity for HER and OER, and NCFCP@NF exhibited long-term durability for overall water splitting.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Pengyao Yu, Ge Yang, Yongming Chai, Lubomira Tosheva, Chunzheng Wang, Heqing Jiang, Chenguang Liu, Hailing Guo
Summary: Thin LTA zeolite membranes were prepared through secondary growth of nano LTA seeds in a highly reactive gel, resulting in membranes with superior permeability and selectivity in gas separation applications.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Baiqin Zhou, Huiping Li, Ziyu Wang, Hui Huang, Yujun Wang, Ruichun Yang, Ranran Huo, Xiaoyan Xu, Ting Zhou, Xiaochen Dong
Summary: The use of machine learning to predict the performance of specific adsorbents in phosphate adsorption shows great promise in saving time and revealing underlying mechanisms. However, the small size of the dataset and insufficient detailed information limits the model training process and the accuracy of results. To address this, the study employs a fuzzing strategy that replaces detailed numeric information with descriptive text messages on the physiochemical properties of adsorbents. This strategy allows the recovery of discarded samples with limited information, leading to accurate prediction of adsorption amount, capacity, and kinetics. The study also finds that phosphate uptake by adsorbents is generally through physisorption, with some involvement of chemisorption. The framework established in this study provides a practical approach for quickly predicting phosphate adsorption performance in urgent scenarios, using easily accessible information.
CHEMICAL ENGINEERING JOURNAL
(2024)
Article
Engineering, Environmental
Paula Alejandra Lamprea Pineda, Joren Bruneel, Kristof Demeestere, Lisa Deraedt, Tex Goetschalckx, Herman Van Langenhove, Christophe Walgraeve
Summary: This study evaluates the use of four esterified fatty acids and three vegetable oils as absorption liquids for hydrophobic VOCs. The experimental results show that isopropyl myristate is the most efficient liquid for absorbing the target VOCs.
CHEMICAL ENGINEERING JOURNAL
(2024)