4.7 Article

An in-plane S-scheme heterostructure drives H2 production with water and solar energy

Journal

CHEMICAL ENGINEERING JOURNAL
Volume 437, Issue -, Pages -

Publisher

ELSEVIER SCIENCE SA
DOI: 10.1016/j.cej.2022.135280

Keywords

Photocatalysis; S-scheme; Density functional theory; In-plane heterojunction; SnO2/CdS

Funding

  1. National Nature Science Foundation of China [21871066]
  2. Natural Science Foundation of Heilongjiang Province in China [LH2021B010]

Ask authors/readers for more resources

This study designs and fabricates a novel SnO2/CdS 2D in-plane heterojunction, which exhibits efficient charge carrier migration capabilities and significantly enhances the photocatalytic hydrogen production. This provides opportunities for developing advanced photocatalysts for water splitting.
Construction of S-scheme photocatalysts for sustainable hydrogen production has been regarded as a promising route to effectively utilize solar energy. However, the limited contact area blocks extensive migration of charge carrier and restrains the further development of these photocatalysts. Herein, a novelty SnO2/CdS 2D in-plane heterojunction is designed and fabricated, in which interfacial lattice match occurs in the nanosheets providing a reasonable condition for close combination between SnO2 and CdS. Specially, experimental results and corresponding density functional theory simulation jointly identify the charge redistribution and formation internal electric field between two branches, which is the intrinsic cause for promoting charge carrier migrating following S-scheme mechanism. Eventually, contributed by the appropriate surface hydrogen adsorption free energy and enhanced reduction abilities of the electrons, the photocatalytic H2 production of optimized SnO2/CdS nanosheets is about 10 and 5 times higher than that of SnO2 and CdS. The excellent performance of SnO2/ CdS and novel designed synthetic method provide opportunities to develop advanced photocatalysts for water splitting.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

Article Chemistry, Multidisciplinary

g-C3N4/SnS2 van der Waals Heterostructures Enabling High-Efficiency Photocatalytic Hydrogen Evolution

Yue Liu, Chade Lv, Jingxue Sun, Xin Zhou, Yansong Zhou, Gang Chen

Summary: In this study, a 2D/2D g-C3N4/SnS2 photocatalyst with vdW heterojunction was developed for high-efficiency hydrogen production under visible light illumination. The presence of vdW heterojunction was found to enhance the photocatalytic activity by optimizing the behavior of photogenerated carriers and promoting interaction between reactants and catalysts. The heterojunction also facilitated efficient interfacial charge migration and separation, as well as reduction in surface hydrogen adsorption-desorption.

ADVANCED MATERIALS INTERFACES (2022)

Article Chemistry, Multidisciplinary

Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries

Chunshuang Yan, Chade Lv, Bei -Er Jia, Lixiang Zhong, Xun Cao, Xuelin Guo, Hengjie Liu, Wenjie Xu, Daobin Liu, Lan Yang, Jiawei Liu, Huey Hoon Hng, Wei Chen, Li Song, Shuzhou Li, Zheng Liu, Qingyu Yan, Guihua Yu

Summary: This study demonstrates that amorphization is an effective strategy to address critical issues in aqueous aluminum metal batteries (AMBs). By shifting the reduction potential for aluminum deposition, the amorphous aluminum (a-Al) interfacial layer facilitates stable aluminum plating and stripping, while mitigating passivation and enhancing interfacial ion transfer kinetics. The use of a noncorrosive, low-cost, and fluorine-free electrolyte further contributes to the excellent electrochemical performance of the AMBs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Review Chemistry, Multidisciplinary

Rechargeable Aqueous Aluminum-Ion Battery: Progress and Outlook

Bei-Er Jia, Ai Qin Thang, Chunshuang Yan, Chuntai Liu, Chade Lv, Qiang Zhu, Jianwei Xu, Jian Chen, Hongge Pan, Qingyu Yan

Summary: The high cost and scarcity of lithium resources have led researchers to seek alternatives, with rechargeable aluminum-ion batteries (AIBs) being an attractive option due to their high capacity and abundance of aluminum. Although nonaqueous AIBs have better electrochemical performance, aqueous AIBs have gained attention due to their low cost and enhanced safety. This review summarizes recent progress in developing stable electrodes and electrolytes for aqueous AIBs, as well as the challenges and future research outlook.

SMALL (2022)

Article Chemistry, Physical

Dual ions intercalation drives high-performance aqueous Zn-ion storage on birnessite-type manganese oxides cathode

Fengyang Jing, Yanan Liu, Yaru Shang, Chade Lv, Liangliang Xu, Jian Pei, Jian Liu, Gang Chen, Chunshuang Yan

Summary: This study improves the Zn2+ transport and structural stability of aqueous zinc-ion batteries by introducing magnesium and potassium ions, achieving outstanding electrochemical performance with ultrahigh reversible capacity and excellent cycling stability.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Emerging p-Block-Element-Based Electrocatalysts for Sustainable Nitrogen Conversion

Chade Lv, Jiawei Liu, Carmen Lee, Qiang Zhu, Jianwei Xu, Hongge Pan, Can Xue, Qingyu Yan

Summary: The article discusses the importance of artificial nitrogen conversion reactions and the need for efficient catalysts. In contrast to transition-metal-based catalysts, p-block-element-based catalysts have shown promising performance due to their unique physiochemical properties and poor hydrogen adsorption ability. The latest breakthroughs in the development of these catalysts for nitrogen conversion applications, such as ammonia and urea electrosynthesis, are summarized, along with discussions on catalyst design strategies and reaction mechanisms. The challenges and opportunities for future research directions are also proposed.

ACS NANO (2022)

Article Chemistry, Physical

Realizing improved CO2 photoreduction in Z-scheme Bi4O5Br2/AgBr heterostructure

Xiaoli Jin, Jian Cao, Huiqing Wang, Chade Lv, Haiquan Xie, Fengyun Su, Xin Li, Ruixue Sun, Shukui Shi, Mengfei Dang, Liqun Ye

Summary: In this study, an Ag-bridged Z-scheme Bi4O5Br2/AgBr heterostructure was developed for efficient photocatalytic CO2 reduction. The Ag mediator acted as a bridge to shuttle electrons between Bi4O5Br2 and AgBr, effectively separating electron-hole pairs and maintaining strong reduction reaction. The Z-scheme Bi4O5Br2/AgBr heterostructures showed significantly enhanced photocatalytic CO2 reduction performance compared to pristine Bi4O5Br2.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

Ammonia Electrosynthesis with a Stable Metal-Free 2D Silicon Phosphide Catalyst

Chade Lv, Ning Jia, Yumin Qian, Shanpeng Wang, Xuechun Wang, Wei Yu, Chuntai Liu, Hongge Pan, Qiang Zhu, Jianwei Xu, Xutang Tao, Kian Ping Loh, Can Xue, Qingyu Yan

Summary: Metal-free 2D phosphorus-based materials are potentially efficient and stable catalysts for electrochemical nitrogen reduction reaction. A stable phosphorus-based electrocatalyst, silicon phosphide (SiP), is explored and found to have high catalytic activity for NH3 production. Crystalline SiP nanosheets show superior electrocatalytic performance compared to amorphous SiP nanosheets due to their resistance to oxidization. The findings suggest that SiP nanosheets have great potential as electrocatalysts for nitrogen reduction reactions.

SMALL (2023)

Article Chemistry, Physical

Implantation of iron into copper: an effective strategy for facilitating electrocatalytic nitrogen reduction reaction

Yi Kong, Chade Lv, Gang Chen

Summary: Electrocatalytic nitrogen reduction reaction (ENRR) is a potential alternative to the Haber-Bosch approach, and a simple and effective strategy of iron surface implantation is recommended to enhance the NRR activity. The Fe/Cu catalyst achieved a NH3 yield rate of 6.8 +/- 0.4 mg/h/cm and a Faradaic efficiency of 16.0 +/- 1.1% in an alkaline electrolyte. Theoretical calculations showed that iron implantation can improve nitrogen adsorption, weaken the N-N bond, and lower the energy barrier of the potential determining step for promoting the NRR process. This work provides a new route for designing efficient catalysts for ENRR under ambient conditions.《Design of Fe/Cu catalyst and its application in nitrogen reduction reaction》

MATERIALS TODAY ENERGY (2023)

Article Chemistry, Physical

An efficient and multifunctional S-scheme heterojunction photocatalyst constructed by tungsten oxide and graphitic carbon nitride: Design and mechanism study

Yaru Shang, Chunliang Wang, Chunshuang Yan, Fengyang Jing, Morteza Roostaeinia, Yu Wang, Gang Chen, Chade Lv

Summary: The study focuses on the design of a multifunctional photocatalyst with strong redox performance, constructed by a S-scheme heterojunction between metal-free g-C3N4 and noble-metal-free W18O49. The designed photocatalyst exhibits outstanding sustainability with hydrogen production, degradation, and bactericidal properties. The integration of hollow g-C3N4 nanotubes and W18O49 nanowires enhances the light harvesting ability, and the S-scheme heterojunction promotes carrier separation and redox ability of the catalyst. This work provides a theoretical basis for improving photocatalytic performance and expanding the application field of photocatalysis.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Review Chemistry, Physical

Recent Advances in Metal-Organic Framework-Based Nanomaterials for Electrocatalytic Nitrogen Reduction

Bo Han, Jiawei Liu, Carmen Lee, Chade Lv, Qingyu Yan

Summary: This paper provides a comprehensive review on the application and development of metal-organic framework (MOF) catalysts in the electrochemical nitrogen reduction reaction (E-NRR) field. It first introduces the basic principles of E-NRR, including the reaction mechanism, major apparatus components, performance criteria, and ammonia detection protocols. Then, the synthesis and characterization methods for MOFs and their derivatives are discussed. A reaction mechanism study via density functional theory calculations is also presented. Furthermore, the recent advancement of MOF-based catalysts in the E-NRR field, as well as the modification approaches on MOFs for E-NRR optimization, are elaborated. Finally, the current challenges and outlook of MOF catalyst-based E-NRR field are emphasized.

SMALL METHODS (2023)

Article Biochemistry & Molecular Biology

The Construction of Surface-Frustrated Lewis Pair Sites to Improve the Nitrogen Reduction Catalytic Activity of In2O3

Mingqian Wang, Ming Zheng, Yuchen Sima, Chade Lv, Xin Zhou

Summary: This study constructs surface-frustrated Lewis pairs (SFLPs) structures by doping non-metallic elements on the In2O3 (110) surface, and finds that these structures can serve as efficient electrocatalytic nitrogen reduction catalysts, activating N-2 molecules and suppressing the hydrogen evolution reaction.

MOLECULES (2023)

Article Chemistry, Multidisciplinary

Tuning Main Group Element-based Metal-Organic Framework to Boost Electrocatalytic Nitrogen Reduction Under Ambient Conditions

Bo Han, Lixiang Zhong, Cailing Chen, Jie Ding, Carmen Lee, Jiawei Liu, Mengxin Chen, Shuen Tso, Yue Hu, Chade Lv, Yu Han, Bin Liu, Qingyu Yan

Summary: Main group element-based materials, specifically aluminum-based defective metal-organic frameworks (MOFs), show promising capabilities as electrocatalysts for sustainable ammonia production via electrochemical nitrogen reduction reaction (N2RR) under ambient conditions. Defective aluminum sites in the aluminum-fumarate (Al-Fum) MOF play a crucial role in promoting N2RR activity. The defective Al-Fum exhibits stable and efficient electrochemical N2RR, with a high production rate of 53.9 μg(NH3) h(-1)mg(cat)(-1) and a Faradaic efficiency of 73.8% under ambient conditions.

SMALL (2023)

Article Chemistry, Physical

Mimicking Frustrated Lewis Pairs on Graphitic Carbon Nitride for CO2 Photoreduction

Yaru Shang, Ming Zheng, Hengjie Liu, Xiaoli Jin, Chunshuang Yan, Li Song, Zeming Qi, Fengyang Jing, Pin Song, Xin Zhou, Gang Chen, Chade Lv

Summary: In this study, a boron- and sulfur-doped graphitic carbon nitride catalyst was used to selectively and efficiently synthesize CO from CO2 through a photochemical process. The catalyst showed high selectivity and significantly improved catalytic efficiency compared to bulk graphitic carbon nitride due to the unique mimicking frustrated Lewis pairs configuration.

ACS CATALYSIS (2023)

Review Chemistry, Physical

Interface Engineering for Aqueous Aluminum Metal Batteries: Current Progresses and Future Prospects

Huaming Yu, Chade Lv, Chunshuang Yan, Guihua Yu

Summary: This review emphasizes the importance of aqueous aluminum metal batteries (AMBs) and identifies the instability of the aluminum anode/electrolyte interface (AEI) as the main challenge to the further development of AMBs. The review also provides a systematic overview of recent progress in rational interface engineering principles and offers suggestions and perspectives for optimizing the aluminum anode and aqueous electrolytes to enable a stable and durable AEI.

SMALL METHODS (2023)

Article Chemistry, Applied

An amorphous manganese iron oxide hollow nanocube cathode for aqueous zinc ion batteries

Fengyang Jing, Chade Lv, Liangliang Xu, Yaru Shang, Jian Pei, Pin Song, Yuanheng Wang, Gang Chen, Chunshuang Yan

Summary: Aqueous zinc ion batteries (ZIBs) have gained attention due to their low cost and high safety. However, traditional manganese oxide cathode materials face challenges such as low electronic conductivity, slow ions diffusion kinetics, and structural collapse. In this study, a hollow nanocube cathode material derived from Prussian blue analogue precursor was developed, which has amorphous nature, allowing for better ions and electrons transport kinetics and preventing structural collapse.

JOURNAL OF ENERGY CHEMISTRY (2023)

Article Engineering, Environmental

A metal-phenolic network-assembled nanotrigger evokes lethal ferroptosis via self-supply loop-based cytotoxic reactions

Xinping Zhang, Yuxin Guo, Xiaoyang Liu, Shun-Yu Wu, Ya-Xuan Zhu, Shao-Zhe Wang, Qiu-Yi Duan, Ke-Fei Xu, Zi-Heng Li, Xiao-Yu Zhu, Guang-Yu Pan, Fu-Gen Wu

Summary: This study develops a nanotrigger HCFT for simultaneous photodynamic therapy and light-triggered ferroptosis therapy. The nanotrigger can relieve tumor hypoxia, induce enhanced photodynamic reaction, and facilitate the continuation of Fenton reaction, ultimately leading to lethal ferroptosis in tumor cells.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

XAS and DFT investigation of atomically dispersed Cu/Co alloyed Pt local structures under selective hydrogenation of acetylene to ethylene

Olumide Bolarinwa Ayodele, Toyin Daniel Shittu, Olayinka S. Togunwa, Dan Yu, Zhen-Yu Tian

Summary: This study focused on the semihydrogenation of acetylene in an ethylene-rich stream using two alloyed Pt catalysts PtCu and PtCo. The PtCu catalyst showed higher activity and ethylene yield compared to PtCo due to its higher unoccupied Pt d-orbital density. This indicates that alloying Pt with Cu is more promising for industrial relevant SHA catalyst.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

A multifunctional emitter with synergistical adjustment of rigidity and flexibility for high-performance data-recording and organic light-emitting devices with hot exciton channel

Guowei Chen, Wen-Cheng Chen, Yaozu Su, Ruicheng Wang, Jia-Ming Jin, Hui Liang, Bingxue Tan, Dehua Hu, Shaomin Ji, Hao-Li Zhang, Yanping Huo, Yuguang Ma

Summary: This study proposes an intramolecular dual-locking design for organic luminescent materials, achieving high luminescence efficiency and performance for deep-blue organic light-emitting diodes. The material also exhibits unique mechanochromic luminescence behavior and strong fatigue resistance.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Cobalt/nickel purification by solvent extraction with ionic liquids in millifluidic reactors: From single-channel to numbered-up configuration with solvent recycle

Joren van Stee, Gregory Hermans, Jinu Joseph John, Koen Binnemans, Tom Van Gerven

Summary: This work presents a continuous solvent extraction method for the separation of cobalt and nickel in a millifluidic system using Cyphos IL 101 (C101) as the extractant. The optimal conditions for extraction performance and solvent properties were determined by investigating the effects of channel length, flow rate, and temperature. The performance of a developed manifold structure was compared to a single-channel system, and excellent separation results were achieved. The continuous separation process using the manifold structure resulted in high purity cobalt and nickel products.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Environment-triggered nanoagent with programmed gas release performance for accelerating diabetic infected wound healing

Yan Xu, Jingai Jiang, Xinyi Lv, Hui Li, Dongliang Yang, Wenjun Wang, Yanling Hu, Longcai Liu, Xiaochen Dong, Yu Cai

Summary: A programmed gas release nanoparticle was developed to address the challenges in treating diabetic infected wounds. It effectively removes drug-resistant pathogens and remodels the wound microenvironment using NO and H2S. The nanoparticle can eliminate bacteria and promote wound healing through antibacterial and anti-inflammatory effects.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Synergistic dopa-reinforced fluid hydrosol as highly efficient coal dust suppressant

Tong Xia, Zhilin Xi, Lianquan Suo, Chen Wang

Summary: This study investigated a highly efficient coal dust suppressant with low initial viscosity and high adhesion-solidification properties. The results demonstrated that the dust suppressant formed a network of multiple hydrogen bonding cross-linking and achieved effective adhesion and solidification of coal dust through various chemical reactions.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

First principle-based rate equation theory for the carbonation kinetics of CaO with CO2 in calcium looping

Jinzhi Cai, Zhenshan Li

Summary: A density functional theory-based rate equation was developed to predict the gas-solid reaction kinetics of CaO carbonation with CO2 in calcium looping. The negative activation energy of CaO carbonation close to equilibrium was accurately predicted through experimental validation.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Significant enhancement of high-temperature capacitive energy storage in dielectric films through surface self-assembly of BNNS coatings

Jianxiong Chen, Fuhao Ren, Ningning Yin, Jie Mao

Summary: This study presents an economically efficient and easily implementable surface modification approach to enhance the high-temperature electrical insulation and energy storage performance of polymer dielectrics. The self-assembly of high-insulation-performance boron nitride nanosheets (BNNS) on the film surface through electrostatic interactions effectively impedes charge injection from electrodes while promoting charge dissipation and heat transfer.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Medium entropy metal oxide induced *OH species targeted transfer strategy for efficient polyethylene terephthalate plastic recycling

Zijian Li, Zhaohui Yang, Shao Wang, Hongxia Luo, Zhimin Xue, Zhenghui Liu, Tiancheng Mu

Summary: This study reports a strategy for upgrading polyester plastics into value-added chemicals using electrocatalytic methods. By inducing the targeted transfer of *OH species, polyethylene terephthalate was successfully upgraded into potassium diformate with high purity. This work not only develops an excellent electrocatalyst, but also provides guidance for the design of medium entropy metal oxides.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

A novel environmental friendly and sustainable process for textile dyeing with sulphur dyes for cleaner production

Navneet Singh Shekhawat, Surendra Kumar Patra, Ashok Kumar Patra, Bamaprasad Bag

Summary: This study primarily focuses on developing a sulphur dyeing process at room temperature using bacterial Lysate, which is environmentally friendly, energy and cost effective, and sustainable. The process shows promising improvements in dye uptake and fastness properties.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Highly efficient and sustainable cationic polyvinyl chloride nanofibrous membranes for removal of E. coli and Cr (VI): Filtration and adsorption

Dengjia Shen, Hongyang Ma, Madani Khan, Benjamin S. Hsiao

Summary: This study developed cationic PVC nanofibrous membranes with high filtration and adsorption capability for the removal of bacteria and hexavalent chromium ions from wastewater. The membranes demonstrated remarkable performance in terms of filtration efficiency and maximum adsorption capacity. Additionally, modified nanofibrous membranes were produced using recycled materials and showed excellent retention rates in dynamic adsorption processes.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Concerted proton-coupled electron transfer promotes NiCoP nanowire arrays for efficient overall water splitting at industrial-level current density

Xiaoyan Wang, Zhikun Wang, Ben Jia, Chunling Li, Shuangqing Sun, Songqing Hu

Summary: Inspired by photosystem II, self-supported Fe-doped NiCoP nanowire arrays modified with carboxylate were constructed to boost industrial-level overall water splitting by employing the concerted proton-coupled electron transfer mechanism. The introduction of Fe and carboxyl ligand led to improved catalytic activity for HER and OER, and NCFCP@NF exhibited long-term durability for overall water splitting.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Self-limiting growth of thin dense LTA membranes boosts H2 gas separation performance

Pengyao Yu, Ge Yang, Yongming Chai, Lubomira Tosheva, Chunzheng Wang, Heqing Jiang, Chenguang Liu, Hailing Guo

Summary: Thin LTA zeolite membranes were prepared through secondary growth of nano LTA seeds in a highly reactive gel, resulting in membranes with superior permeability and selectivity in gas separation applications.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Prediction of phosphate adsorption amount, capacity and kinetics via machine learning: A generally physical-based process and proposed strategy of using descriptive text messages to enrich datasets

Baiqin Zhou, Huiping Li, Ziyu Wang, Hui Huang, Yujun Wang, Ruichun Yang, Ranran Huo, Xiaoyan Xu, Ting Zhou, Xiaochen Dong

Summary: The use of machine learning to predict the performance of specific adsorbents in phosphate adsorption shows great promise in saving time and revealing underlying mechanisms. However, the small size of the dataset and insufficient detailed information limits the model training process and the accuracy of results. To address this, the study employs a fuzzing strategy that replaces detailed numeric information with descriptive text messages on the physiochemical properties of adsorbents. This strategy allows the recovery of discarded samples with limited information, leading to accurate prediction of adsorption amount, capacity, and kinetics. The study also finds that phosphate uptake by adsorbents is generally through physisorption, with some involvement of chemisorption. The framework established in this study provides a practical approach for quickly predicting phosphate adsorption performance in urgent scenarios, using easily accessible information.

CHEMICAL ENGINEERING JOURNAL (2024)

Article Engineering, Environmental

Absorption of hydrophobic volatile organic compounds in renewable vegetable oils and esterified fatty acids: Determination of gas-liquid partitioning coefficients as a function of temperature

Paula Alejandra Lamprea Pineda, Joren Bruneel, Kristof Demeestere, Lisa Deraedt, Tex Goetschalckx, Herman Van Langenhove, Christophe Walgraeve

Summary: This study evaluates the use of four esterified fatty acids and three vegetable oils as absorption liquids for hydrophobic VOCs. The experimental results show that isopropyl myristate is the most efficient liquid for absorbing the target VOCs.

CHEMICAL ENGINEERING JOURNAL (2024)