Selective laser melting of SiCp/Al composites: Densification, microstructure, and mechanical and tribological properties
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Selective laser melting of SiCp/Al composites: Densification, microstructure, and mechanical and tribological properties
Authors
Keywords
Selective laser melting (SLM), SiC, p, /Al composites, Microhardness, Tribological properties
Journal
CERAMICS INTERNATIONAL
Volume 47, Issue 21, Pages 30826-30837
Publisher
Elsevier BV
Online
2021-07-28
DOI
10.1016/j.ceramint.2021.07.263
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
- (2021) Hong-Yu Yang et al. COMPOSITES PART B-ENGINEERING
- Influence of reinforcing particle distribution on the casting characteristics of Al-SiCp composites
- (2020) Xinliang Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material
- (2020) Rui Wang et al. POWDER TECHNOLOGY
- Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites
- (2020) Taegyu Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- AA2024/SiC metal matrix composites simultaneously improve ductility and cracking resistance during elevated temperature deformation
- (2020) O.V. Rofman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superior Mechanical Performance of Inductively Sintered Al/SiC Nanocomposites Processed by Novel Milling Route
- (2020) Saud M. Almotairy et al. Scientific Reports
- Effect of SiC addition on the mechanical properties and wear behavior of Al-SiC nanocomposites produced by accumulative roll bonding
- (2020) Wael S Hassanein et al. Materials Research Express
- Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties
- (2020) Rui Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study of the Microstructure and Ring Element Segregation Zone of Spray Deposited SiCp/7055Al
- (2019) Hao Yang et al. Materials
- Fabrication, Microstructure and Properties of the Mid-Fraction SiC Particles/6061Al Composites Using an Optimized Powder Metallurgy Technique
- (2019) Yinqiu Huang et al. Russian Journal of Non-Ferrous Metals
- Abnormal deformation behavior and particle distribution during hot compression of fine-grained 14 vol% SiCp/2014Al composite
- (2018) Z.Y. Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
- (2018) Zhongji Sun et al. NPG Asia Materials
- PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application
- (2018) Yan Chen et al. CERAMICS INTERNATIONAL
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment
- (2017) Bandar AlMangour et al. POWDER TECHNOLOGY
- Modification of microstructure and superficial properties of A356 and A356/10%SiCp by Selective Laser Surface Melting (SLSM)
- (2017) L.M. Laorden et al. SURFACE & COATINGS TECHNOLOGY
- Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables
- (2016) Jaswinder Singh et al. CERAMICS INTERNATIONAL
- Rapid fabrication of bulk-form TiB 2 /316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting
- (2016) Bandar AlMangour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis and characterisation of advanced ball-milled Al-Al 2 O 3 nanocomposites for selective laser melting
- (2016) Quanquan Han et al. POWDER TECHNOLOGY
- Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Reactions Between Ti2AlC, B4C, and Al and Phase Equilibria at 1000 °C in the Al-Ti-B-C Quaternary System
- (2015) Matthias T. Agne et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion
- (2015) Long-Jiang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting of in-situ Al4SiC4 + SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
- (2015) Fei Chang et al. SURFACE & COATINGS TECHNOLOGY
- Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
- (2015) Pengpeng Yuan et al. MATERIALS & DESIGN
- Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties
- (2014) Hooyar Attar et al. ACTA MATERIALIA
- Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
- (2013) Kaka Ma et al. ACTA MATERIALIA
- Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures
- (2013) P. Krakhmalev et al. INTERMETALLICS
- Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites
- (2013) Omyma El-Kady et al. MATERIALS & DESIGN
- Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments
- (2013) Donghua Dai et al. MATERIALS & DESIGN
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Thermodynamic Assessments of the Al2O3-Al4C3-AlN and Al4C3-AlN-SiC Systems
- (2012) D. Pavlyuchkov et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtration
- (2012) Sarina BAO et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
- (2011) T. Vilaro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Laser processing of SiC-particle-reinforced coating on titanium
- (2010) Mitun Das et al. SCRIPTA MATERIALIA
- Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures
- (2008) S. Natarajan et al. MATERIALS & DESIGN
- Grain refinement in a single titanium powder particle impacted at high velocity
- (2008) KeeHyun Kim et al. SCRIPTA MATERIALIA
- Microstructure evolution and wear properties of in situ synthesized TiB2 and TiC reinforced steel matrix composites
- (2007) Farid Akhtar JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanisms of sliding wear of metals and alloys at elevated temperatures
- (2007) A. Pauschitz et al. TRIBOLOGY INTERNATIONAL
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started