Heat and mass transfer mechanism of micro-combustion system with dual-fuel at high environmental load

Characteristics analysis and parameter optimization of a micro-combustion based thermoelectric generator

(2021) Wei Wang et al.   APPLIED THERMAL ENGINEERING

Process in micro-combustion and energy conversion of micro power system: A review

(2021) Jiaqiang E et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation on ignition, combustion and micro-explosion of RP-3, biodiesel and ethanol blended droplets

(2020) Kesheng Meng et al.   APPLIED THERMAL ENGINEERING

Combustion in wavy micro-channels for thermo-photovoltaic applications – Part I: Effects of wavy wall geometry, wall temperature profile and reaction mechanism

(2019) Zakaria Mansouri   ENERGY CONVERSION AND MANAGEMENT

Numerical Simulation and Unsteady Combustion Model of AP/HTPB Propellant under Depressurization by Rotation

(2019) Zhen-W. Ye et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

The effect of embedded high thermal conductivity material on combustion performance of catalytic micro combustor

(2018) Yi Zhang et al.   ENERGY CONVERSION AND MANAGEMENT

Coupling characteristics of combustion-gas flows generated by two energetic materials in base bleed unit under rapid depressurization

(2018) Longze Ma et al.   APPLIED THERMAL ENGINEERING

Experimental investigation on combustion characteristics of premixed propane/air in a micro-planar heat recirculation combustor

(2017) Aikun Tang et al.   ENERGY CONVERSION AND MANAGEMENT

Optimal combustor dimensions for the catalytic combustion of methane-air mixtures in micro-channels

(2017) Junjie Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Numerical and experimental analyses of the characteristics of burning jets of base bleed ignited in the atmospheric environment

(2017) Longze Ma et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Numerical Simulation of Quenched Combustion Model for AP/HTPB Propellant under Transient Depressurization

(2017) Zhen-Wei Ye et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step

(2016) E. Jiaqiang et al.   APPLIED ENERGY

Combustion and direct energy conversion inside a micro-combustor

(2016) Yafeng Lei et al.   APPLIED THERMAL ENGINEERING

Fundamental flame characteristics of premixed H2–air combustion in a planar porous micro-combustor

(2016) Jun Li et al.   CHEMICAL ENGINEERING JOURNAL

Experimental and numerical investigation of hetero-/homogeneous combustion-based HCCI of methane–air mixtures in free-piston micro-engines

(2016) Junjie Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor

(2016) Jiaqiang E et al.   ENERGY CONVERSION AND MANAGEMENT

Combustion in micro-channels with a controlled temperature gradient

(2016) Annalisa Di Stazio et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental study on standing wave regimes of premixed H 2 –air combustion in planar micro-combustors partially filled with porous medium

(2016) Jun Li et al.   FUEL

Numerical analysis of AP/HTPB composite propellant combustion under rapid depressurization

(2015) Y.J. Cao et al.   APPLIED THERMAL ENGINEERING

Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application

(2015) Dongyue Jiang et al.   ENERGY CONVERSION AND MANAGEMENT

Impacts of inner/outer reactor heat recirculation on the characteristic of micro-scale combustion system

(2015) Ghobad Bagheri et al.   ENERGY CONVERSION AND MANAGEMENT

Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities

(2015) Jianlong Wan et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal and chemical structures formed in the micro burner of miniaturized hydrogen-air jet flames

(2015) Akter Hossain et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Detailed transient numerical simulation of H2/air hetero-/homogeneous combustion in platinum-coated channels with conjugate heat transfer

(2014) Andrea Brambilla et al.   COMBUSTION AND FLAME

Experimental Study of Transient Combustion Characteristics of AP/HTPB Base Bleed Propellant Under Rapid Pressure Drop

(2014) Rui Ye et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Investigation of bluff-body micro-flameless combustion

(2014) Seyed Ehsan Hosseini et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal and chemical effects of hydrogen addition on catalytic micro-combustion of methane–air

(2014) Yunfei Yan et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Study on Unsteady Combustion Behaviors of AP/HTPB Base-Bleed Propellants under Transient Depressurization Conditions

(2014) Yong-Gang Yu et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Numerical study of the effects of wire insertion on CH4(methane)/AIR pre-mixed flame in a micro combustor

(2013) Mohammadreza Baigmohammadi et al.   ENERGY

Improving of diesel combustion-pollution-fuel economy and performance by gasoline fumigation

(2013) Zehra Şahin et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation of the factors affecting the burning rate of solid rocket propellants

(2013) Hayri Yaman et al.   FUEL

Thermophotovoltaic power conversion from a heat-recirculating micro-emitter

(2012) J.H. Park et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Instability of flame in micro-combustor under different external thermal environment

(2011) Yang Wang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Stability of hetero-/homogeneous combustion in propane- and methane-fueled catalytic microreactors: Channel confinement and molecular transport effects

(2010) Symeon Karagiannidis et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Burning Characteristics and Thermochemical Behavior of AP/HTPB Composite Propellant Using Coarse and Fine AP Particles

(2010) Makoto Kohga   PROPELLANTS EXPLOSIVES PYROTECHNICS

Development of 1D model for the analysis of heat transport in cylindrical micro combustors

(2008) Jun Li et al.   APPLIED THERMAL ENGINEERING