Study on processing and strengthening mechanisms of mild steel subjected to laser cavitation peening

Laser cavitation peening of gray cast iron: Effect of coverage layer on the surface integrity

(2020) Jiayang Gu et al.   APPLIED SURFACE SCIENCE

Simulation investigation on impact damage characteristics of metal plate by cavitating bubble micro-jet water hammer

(2020) Zhanshan Xie et al.   ENGINEERING FAILURE ANALYSIS

Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel

(2020) Hitoshi Soyama et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Dynamics of laser-induced cavitation bubbles near a short hole and laser cavitation processing with particles

(2020) Chunhui Luo et al.   OPTICS AND LASER TECHNOLOGY

Effects of immersion depth on the dynamics of cavitation bubbles generated during ns laser ablation of submerged targets

(2020) Jiangyou Long et al.   OPTICS AND LASERS IN ENGINEERING

Bubble dynamic evolution, material strengthening and chemical effect induced by laser cavitation peening

(2020) Jiayang Gu et al.   ULTRASONICS SONOCHEMISTRY

Shock wave emission and cavitation bubble dynamics by femtosecond optical breakdown in polymer solutions

(2019) Emil-Alexandru Brujan   ULTRASONICS SONOCHEMISTRY

Simulation of laser-produced single cavitation bubbles with hybrid thermal Lattice Boltzmann method

(2019) Chi Peng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Plastic-deformation-driven SiC nanoparticle implantation in an Al surface by laser shock wave: Mechanical properties, microstructure characteristics, and synergistic strengthening mechanisms

(2018) Chengyun Cui et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Surface strengthening behaviors of pure Cu with heterogeneous microstructures

(2018) C.X. Ren et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical effect of laser-induced cavitation bubble of 2A02 alloy

(2018) X.D. Ren et al.   OPTICS AND LASER TECHNOLOGY

Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 K

(2018) Jongun Moon et al.   Scientific Reports

Surface integrity of 2A70 aluminum alloy processed by laser-induced peening and cavitation bubbles

(2018) Hongfeng Zhang et al.   Results in Physics

Gradient hierarchical grain structures of Al0.1CoCrFeNi high-entropy alloys through dynamic torsion

(2018) G. Chen et al.   MATERIALS LETTERS

A microstructure-based macro-micro multi-scale fine-blanking simulation of ferrite-cementite steels

(2017) Xincun Zhuang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Surface strengthening behaviors of four structural steels processed by surface spinning strengthening

(2017) C.X. Ren et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improvement of abrasion resistance in artificial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening

(2017) Hao Wang et al.   OPTICS AND LASERS IN ENGINEERING

Surface nanocrystallization and gradient microstructural evolutions in the surface layers of 321 stainless steel alloy treated via severe shot peening

(2017) Sadegh Pour-Ali et al.   VACUUM

Pressure characteristics of bubble collapse near a rigid wall in compressible fluid

(2016) Long-kan Wang et al.   APPLIED OCEAN RESEARCH

Comparison between cavitation peening and shot peening for extending the fatigue life of a duralumin plate with a hole

(2016) Hitoshi Soyama et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

High strength and high ductility copper obtained by topologically controlled planar heterogeneous structures

(2016) Xiaowei Liu et al.   SCRIPTA MATERIALIA

Modeling of surface cleaning by cavitation bubble dynamics and collapse

(2016) Georges L. Chahine et al.   ULTRASONICS SONOCHEMISTRY

Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth

(2015) S. Zabeen et al.   ACTA MATERIALIA

On the mechanisms of cavitation erosion – Coupling high speed videos to damage patterns

(2015) Matevž Dular et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

On dislocation pileups and stress-gradient dependent plastic flow

(2015) Nasrin Taheri-Nassaj et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Determination of cavitation load spectra – Part 1: Static finite element approach

(2015) Samir Chandra Roy et al.   WEAR

Numerical modeling of residual stress induced by laser shock processing

(2014) X.L. Wei et al.   APPLIED SURFACE SCIENCE

Microstructure evolution and mechanical properties of eutectoid steel with ultrafine or fine (ferrite+cementite) structure

(2014) Chengsi Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of laser-induced cavitation bubble on a thin elastic membrane

(2014) U. Orthaber et al.   OPTICS AND LASER TECHNOLOGY

Effects of laser shock processing on surface microstructure and mechanical properties of ultrafine-grained high carbon steel

(2013) Yi Xiong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic features of a laser-induced cavitation bubble near a solid boundary

(2013) Yuan Xiang Yang et al.   ULTRASONICS SONOCHEMISTRY

Incubation pit analysis and calculation of the hydrodynamic impact pressure from the implosion of an acoustic cavitation bubble

(2013) I. Tzanakis et al.   ULTRASONICS SONOCHEMISTRY

Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs

(2011) Raghuvir Singh et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Shock wave–bubble interaction near soft and rigid boundaries during lithotripsy: numerical analysis by the improved ghost fluid method

(2011) Kazumichi Kobayashi et al.   PHYSICS IN MEDICINE AND BIOLOGY

Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel

(2010) J.Z. Lu et al.   ACTA MATERIALIA

Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts

(2010) J.Z. Lu et al.   ACTA MATERIALIA

Introduction of compressive residual stress into stainless steel by employing a cavitating jet in air

(2010) Hitoshi Soyama et al.   SURFACE & COATINGS TECHNOLOGY

Cold rolling and recrystallization textures of a Ni–5at.% W alloy

(2009) P.P. Bhattacharjee et al.   ACTA MATERIALIA

Dislocation evolution in titanium during surface severe plastic deformation

(2009) Ming Wen et al.   APPLIED SURFACE SCIENCE

On the pressure of cavitation bubbles

(2008) E.A. Brujan et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Abrasive waterjet peening with elastic prestress: A parametric evaluation

(2008) B. Sadasivam et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Investigation of water cavitation peening-induced microstructures in the near-surface layer of pure titanium

(2008) D.Y. Ju et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY