Millimeter‐Sized Clusters of Triple Cation Perovskite Enables Highly Efficient and Reproducible Roll‐to‐Roll Fabricated Inverted Perovskite Solar Cells

Mechanism of Additive-Assisted Room-Temperature Processing of Metal Halide Perovskite Thin Films

(2021) Maged Abdelsamie et al.   ACS Applied Materials & Interfaces

Compositional and Interfacial Engineering Yield High-Performance and Stable p-i-n Perovskite Solar Cells and Mini-Modules

(2021) Janardan Dagar et al.   ACS Applied Materials & Interfaces

Light-Stable Methylammonium-Free Inverted Flexible Perovskite Solar Modules on PET Exceeding 10.5% on a 15.7 cm2 Active Area

(2021) Luigi Angelo Castriotta et al.   ACS Applied Materials & Interfaces

Apparent Defect Densities in Halide Perovskite Thin Films and Single Crystals

(2021) Johanna Siekmann et al.   ACS Energy Letters

Roll‐to‐Roll Processes for the Fabrication of Perovskite Solar Cells under Ambient Conditions

(2021) Juan F. Benitez-Rodriguez et al.   Solar RRL

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

(2021) Hanul Min et al.   NATURE

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

(2020) Mark V. Khenkin et al.   Nature Energy

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

(2020) Xiaopeng Zheng et al.   Nature Energy

Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites

(2020) Tiarnan A. S. Doherty et al.   NATURE

Perovskite Solution Aging: What Happened and How to Inhibit?

(2020) Xiao Wang et al.   Chem

On the Origin of the Ideality Factor in Perovskite Solar Cells

(2020) Pietro Caprioglio et al.   Advanced Energy Materials

Analyzing Interface Recombination in Lead‐Halide Perovskite Solar Cells with Organic and Inorganic Hole‐Transport Layers

(2020) Jinane Haddad et al.   Advanced Materials Interfaces

Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window

(2020) Young Yun Kim et al.   Nature Communications

Solar cell efficiency tables (version 57)

(2020) Martin Green et al.   PROGRESS IN PHOTOVOLTAICS

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices

(2019) Mojtaba Abdi-Jalebi et al.   Science Advances

Perovskite Solar Cells Yielding Reproducible Photovoltage of 1.20 V

(2019) Essa A. Alharbi et al.   Research

Humidity‐Tolerant Roll‐to‐Roll Fabrication of Perovskite Solar Cells via Polymer‐Additive‐Assisted Hot Slot Die Deposition

(2019) Jueng‐Eun Kim et al.   ADVANCED FUNCTIONAL MATERIALS

Manipulating the Mixed‐Perovskite Crystallization Pathway Unveiled by In Situ GIWAXS

(2019) Minchao Qin et al.   ADVANCED MATERIALS

On the Relation between the Open‐Circuit Voltage and Quasi‐Fermi Level Splitting in Efficient Perovskite Solar Cells

(2019) Pietro Caprioglio et al.   Advanced Energy Materials

Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions

(2019) Wolfgang Tress et al.   Nature Energy

Effect of hot-casted NiO hole transport layer on the performance of perovskite solar cells

(2019) Abdullah Al Mamun et al.   SOLAR ENERGY

Nonradiative Recombination in Perovskite Solar Cells: The Role of Interfaces

(2019) Christian M. Wolff et al.   ADVANCED MATERIALS

New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells

(2019) Seckin Akin et al.   Advanced Energy Materials

Toward High‐Throughput Texturing of Polymer Foils for Enhanced Light Trapping in Flexible Perovskite Solar Cells Using Roll‐to‐Roll Hot Embossing

(2019) Marcos Soldera et al.   ADVANCED ENGINEERING MATERIALS

Advances in Inkjet‐Printed Metal Halide Perovskite Photovoltaic and Optoelectronic Devices

(2019) Florian Mathies et al.   Energy Technology

Slot-die coating of perovskite solar cells: An overview

(2019) Rahul Patidar et al.   Materials Today Communications

Beyond Fullerenes: Indacenodithiophene-Based Organic Charge-Transport Layer toward Upscaling of Low-Cost Perovskite Solar Cells

(2018) Dechan Angmo et al.   ACS Applied Materials & Interfaces

Design rules for minimizing voltage losses in high-efficiency organic solar cells

(2018) Deping Qian et al.   NATURE MATERIALS

Progress in Scalable Coating and Roll-to-Roll Compatible Printing Processes of Perovskite Solar Cells toward Realization of Commercialization

(2018) Yen-Sook Jung et al.   Advanced Optical Materials

One-step roll-to-roll air processed high efficiency perovskite solar cells

(2018) Chuantian Zuo et al.   Nano Energy

Enhancing Defect Tolerance and Phase Stability of High-Bandgap Perovskites via Guanidinium Alloying

(2018) Ryan J. Stoddard et al.   ACS Energy Letters

Interface Design for Metal Halide Perovskite Solar Cells

(2018) Philip Schulz   ACS Energy Letters

Surfactants for smoother films

(2018) Liyuan Han   Nature Energy

Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells

(2018) Konrad Domanski et al.   Nature Energy

Scalable fabrication of perovskite solar cells

(2018) Zhen Li et al.   Nature Reviews Materials

Slow Response of Carrier Dynamics in Perovskite Interface upon Illumination

(2018) Fei Zheng et al.   ACS Applied Materials & Interfaces

Roll-to-Roll Printing of Perovskite Solar Cells

(2018) benjia dou et al.   ACS Energy Letters

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

(2018) Martin Stolterfoht et al.   Nature Energy

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

(2018) Caleb C. Boyd et al.   CHEMICAL REVIEWS

Roll-to-Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells

(2018) Yulia Galagan et al.   Advanced Energy Materials

Electronic Traps and Phase Segregation in Lead Mixed-Halide Perovskite

(2018) Alexander J. Knight et al.   ACS Energy Letters

Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells

(2017) Juan-Pablo Correa-Baena et al.   Energy & Environmental Science

Understanding the Cubic Phase Stabilization and Crystallization Kinetics in Mixed Cations and Halides Perovskite Single Crystals

(2017) Li-Qiang Xie et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Band Gap Tuning via Lattice Contraction and Octahedral Tilting in Perovskite Materials for Photovoltaics

(2017) Rohit Prasanna et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

(2017) Neha Arora et al.   SCIENCE

Promises and challenges of perovskite solar cells

(2017) Juan-Pablo Correa-Baena et al.   SCIENCE

Perovskite Solar Cells on the Way to Their Radiative Efficiency Limit - Insights Into a Success Story of High Open-Circuit Voltage and Low Recombination

(2017) Wolfgang Tress   Advanced Energy Materials

Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells

(2017) Yafei Wang et al.   Nano Energy

Influence of Solvent Coordination on Hybrid Organic–Inorganic Perovskite Formation

(2017) J. Clay Hamill et al.   ACS Energy Letters

High-Efficiency Rubidium-Incorporated Perovskite Solar Cells by Gas Quenching

(2017) Meng Zhang et al.   ACS Energy Letters

Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells

(2017) Alexander D. Jodlowski et al.   Nature Energy

Perovskite ink with wide processing window for scalable high-efficiency solar cells

(2017) Mengjin Yang et al.   Nature Energy

Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites

(2017) Valerio Sarritzu et al.   Scientific Reports

Triple-cation mixed-halide perovskites: towards efficient, annealing-free and air-stable solar cells enabled by Pb(SCN)2 additive

(2017) Yong Sun et al.   Scientific Reports

In situ X-ray scattering of perovskite solar cell active layers roll-to-roll coated on flexible substrates

(2016) Lea H. Rossander et al.   CRYSTENGCOMM

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

(2016) Michael Saliba et al.   Energy & Environmental Science

Guanidinium: A Route to Enhanced Carrier Lifetime and Open-Circuit Voltage in Hybrid Perovskite Solar Cells

(2016) Nicholas De Marco et al.   NANO LETTERS

Guanidinium benefit

(2016) Oliver Graydon   Nature Photonics

Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers

(2016) F. Bella et al.   SCIENCE

Trapped charge-driven degradation of perovskite solar cells

(2016) Namyoung Ahn et al.   Nature Communications

Inverted Perovskite Solar Cells: Progresses and Perspectives

(2016) Tanghao Liu et al.   Advanced Energy Materials

Enhanced Efficiency of Hot-Cast Large-Area Planar Perovskite Solar Cells/Modules Having Controlled Chloride Incorporation

(2016) Hsueh-Chung Liao et al.   Advanced Energy Materials

Crystallisation dynamics in wide-bandgap perovskite films

(2016) M. Jaysankar et al.   Journal of Materials Chemistry A

Towards stable and commercially available perovskite solar cells

(2016) Nam-Gyu Park et al.   Nature Energy

Charge Carriers in Planar and Meso-Structured Organic–Inorganic Perovskites: Mobilities, Lifetimes, and Concentrations of Trap States

(2015) Eline M. Hutter et al.   Journal of Physical Chemistry Letters

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains

(2015) W. Nie et al.   SCIENCE

A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions

(2015) Zhurong Liang et al.   RSC Advances

Lead-free organic–inorganic tin halide perovskites for photovoltaic applications

(2014) Nakita K. Noel et al.   Energy & Environmental Science

Flexible high efficiency perovskite solar cells

(2014) Cristina Roldán-Carmona et al.   Energy & Environmental Science

Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance

(2014) Stefaan De Wolf et al.   Journal of Physical Chemistry Letters

The light and shade of perovskite solar cells

(2014) Michael Grätzel   NATURE MATERIALS

Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells

(2014) Nam Joong Jeon et al.   NATURE MATERIALS

The emergence of perovskite solar cells

(2014) Martin A. Green et al.   Nature Photonics

3D Printer Based Slot-Die Coater as a Lab-to-Fab Translation Tool for Solution-Processed Solar Cells

(2014) Doojin Vak et al.   Advanced Energy Materials

Band-gap tuning of lead halide perovskites using a sequential deposition process

(2014) Sneha A. Kulkarni et al.   Journal of Materials Chemistry A

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

(2013) S. D. Stranks et al.   SCIENCE

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

(2009) Akihiro Kojima et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

(2008) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS