Strength and microstructure evolution in nickel during large strain wire drawing

This study deals with the evolution of strength and microstructure in pure nickel during wire drawing from an initial diameter of 1.74 mm to 30 mu m, corresponding to a total true strain of 8.1. Electron backscattering diffraction (EBSD) and X-ray diffraction (XRD) have been used for microstructural characterization. In the later stages of deformation, the fraction of low angle boundaries decreased as did the misorientations within a grain or cell. The dislocation density stabilized at similar to 2 x 10(15) m(-2), and the activation volume decreased from similar to 100 b(3) at a strain of 1 to similar to 15 b(3) at strains >= 4, where b is the magnitude of the Burgers vector. Cross-sectional EBSD of the wires revealed that a core region had < 111 > fiber texture, whereas a peripheral shell region had a complex fiber texture due to redundant shear strain. Viscoplastic self-consistent (VPSC) simulations were in good agreement with the crystallographic texture evolution in the wires during drawing. The wire drawing data is compared with other deformation techniques, to provide a broad framework for analyzing microstructure-strength-ductility relationships. At large strains of > 2, with an essentially constant dislocation density, the strength can be related solely to Hall-Petch strengthening by a refinement of the transverse grain size. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Automated summary

This study investigates the evolution of strength and microstructure in pure nickel during wire drawing process, showing that crystallographic texture evolution and stable dislocation density at large strains play important roles in determining the strength.