Solvent-Vapor-Annealing-Induced Interfacial Self-Assembly for Simplified One-Step Spraying Organic Solar Cells

Non-Halogenated Polymer Donor-Based Organic Solar Cells with a Nearly 15% Efficiency Enabled by a Classic Ternary Strategy

(2021) Xingpeng Liu et al.   ACS Applied Energy Materials

Nonconjugated Terpolymer Acceptors with Two Different Fused-Ring Electron-Deficient Building Blocks for Efficient All-Polymer Solar Cells

(2021) Wenyan Su et al.   ACS Applied Materials & Interfaces

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

(2021) Xingpeng Liu et al.   ACS Applied Materials & Interfaces

An alcohol-soluble small molecule as efficient cathode interfacial layer materials for polymer solar cells

(2021) Can Chen et al.   OPTICAL MATERIALS

Enhance the efficiency of polymer solar cells through regulating phase segregation and improving charge transport via non-toxic halogen-free additive

(2021) Zhijie Fu et al.   SOLAR ENERGY

Ternary solar cells via ternary polymer donors and third component PC71BM to optimize morphology with 13.15% efficiency

(2021) Xingpeng Liu et al.   SOLAR ENERGY

18.69% PCE from organic solar cells

(2021) Ke Jin et al.   Journal of Semiconductors

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells

(2020) Jia Yao et al.   Nature Communications

Donor–Acceptor Type Polymers Containing Fused-Ring Units as Dopant-Free, Hole-Transporting Materials for High-Performance Perovskite Solar Cells

(2020) Lijun Wang et al.   ACS Applied Energy Materials

Manipulate Micrometer Surface and Nanometer Bulk Phase Separation Structures in the Active Layer of Organic Solar Cells via Synergy of Ultrasonic and High-Pressure Gas Spraying

(2019) Alei Liu et al.   ACS Applied Materials & Interfaces

Enhanced Organic Photovoltaic Performance through Modulating Vertical Composition Distribution and Promoting Crystallinity of the Photoactive Layer by Diphenyl Sulfide Additives

(2019) Jianfeng Li et al.   ACS Applied Materials & Interfaces

A new approach for preparation of ternary bulk-heterojunction using dual-feed ultrasonic spray for organic solar cells

(2019) Swapnil Tak et al.   OPTICAL MATERIALS

Simultaneous functional and structural imaging for photovoltaic devices

(2019) Zibang Zhang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS 2 as a Replacement for PEDOT:PSS

(2019) Yuanbao Lin et al.   ADVANCED MATERIALS

Charge Transport and Extraction of Bilayer Interdiffusion Heterojunction Organic Solar Cells

(2019) Yingying Zhang et al.   Journal of Physical Chemistry C

17% efficiency organic photovoltaic cell with superior processability

(2019) Yong Cui et al.   National Science Review

Roll-to-Roll Slot-Die-Printed Polymer Solar Cells by Self-Assembly

(2018) Junyu Yang et al.   ACS Applied Materials & Interfaces

Printed Nonfullerene Organic Solar Cells with the Highest Efficiency of 9.5%

(2018) Yuanbao Lin et al.   Advanced Energy Materials

All-Spray-Coated Inverted Semitransparent Organic Solar Cells and Modules

(2018) Yu-Ching Huang et al.   IEEE Journal of Photovoltaics

Enhanced Efficiency of Polymer Solar Cells through Synergetic Optimizing Mobility and Tuning Donor Alloy by adding a High-mobility Conjugated Polymer

(2018) jianfeng li et al.   Journal of Materials Chemistry C

ITO based fully-spray coated inverted solar cells with non-toxic solvents: The role of buffer layers interface on low band gap photoactive layer performance

(2018) Giuseppina Polino et al.   Energy Technology

A Self-Organized Poly(vinylpyrrolidone)-Based Cathode Interlayer in Inverted Fullerene-Free Organic Solar Cells

(2018) Bei Yang et al.   ADVANCED MATERIALS

Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering

(2017) Jiahui Wan et al.   Energy & Environmental Science

Non-fullerene organic solar cells with 7% efficiency and excellent air stability through morphological and interfacial engineering

(2017) Liyakath Reshma et al.   ORGANIC ELECTRONICS

Study of ITO-free roll-to-roll compatible polymer solar cells using the one-step doctor blading technique

(2017) Yuanbao Lin et al.   Journal of Materials Chemistry A

Efficient Polymer Solar Cells Spray-Coated from Non-Halogenated Solvents towards Practical Fabrication

(2017) Tong Zhang et al.   Energy Technology

Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells

(2016) Sunsun Li et al.   ADVANCED MATERIALS

Comparative study on triphenylamine-based bi-armed and four-armed small molecule donors for solution processed organic solar cells

(2015) Hongyu Zhen et al.   DYES AND PIGMENTS

High efficiency arrays of polymer solar cells fabricated by spray-coating in air

(2015) Yiwei Zhang et al.   PROGRESS IN PHOTOVOLTAICS

Spontaneous phase separation of a zinc oxide interfacial layer in bulk heterojunction organic photovoltaics

(2015) Yen-Sook Jung et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

From spin coating to doctor blading: A systematic study on the photovoltaic performance of an isoindigo-based polymer

(2015) Kang Xiong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A real-time study of the benefits of co-solvents in polymer solar cell processing

(2015) Jacobus J. van Franeker et al.   Nature Communications

One-step coating inverted polymer solar cells using a conjugated polymer as an electron extraction additive

(2015) Zuosheng Peng et al.   Journal of Materials Chemistry A

Efficiency improved for inverted polymer solar cells with electrostatically self-assembled BenMeIm-Cl ionic liquid layer as cathode interface layer

(2015) Ping Fu et al.   Nano Energy

Simplified Tandem Polymer Solar Cells with an Ideal Self-Organized Recombination Layer

(2014) Hongkyu Kang et al.   ADVANCED MATERIALS

Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials

(2014) Wenjun Zhang et al.   Advanced Energy Materials

Ultrasonic Spray Coating of 6.5% Efficient Diketopyrrolopyrrole-Based Organic Photovoltaics

(2014) Jeffrey G. Tait et al.   IEEE Journal of Photovoltaics

Intensity Dependence of Current–Voltage Characteristics and Recombination in High-Efficiency Solution-Processed Small-Molecule Solar Cells

(2013) Aung Ko Ko Kyaw et al.   ACS Nano

In situ reflectance imaging of organic thin film formation from solution deposition

(2013) Jonas Bergqvist et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Facile hot solvent vapor annealing for high performance polymer solar cell using spray process

(2013) Yu-Ching Huang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Efficiency Enhancement of Polymer Solar Cells by Applying Poly(vinylpyrrolidone) as a Cathode Buffer Layer via Spin Coating or Self-Assembly

(2012) Haitao Wang et al.   ACS Applied Materials & Interfaces

Successive Spray Deposition of P3HT/PCBM Organic Photoactive Layers: Material Composition and Device Characteristics

(2012) Alaa Abdellah et al.   ADVANCED FUNCTIONAL MATERIALS

A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics

(2012) Y. Zhou et al.   SCIENCE

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

(2011) Zhicai He et al.   ADVANCED MATERIALS

Origin of the dark-current ideality factor in polymer:fullerene bulk heterojunction solar cells

(2011) G. A. H. Wetzelaer et al.   APPLIED PHYSICS LETTERS

Airbrush spray-coating of polymer bulk-heterojunction solar cells

(2011) Gianpaolo Susanna et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High-Performance Organic Solar Cells with Spray-Coated Hole-Transport and Active Layers

(2010) Claudio Girotto et al.   ADVANCED FUNCTIONAL MATERIALS

Nanoscale functional interlayers formed through spontaneous vertical phase separation in polymer photovoltaic devices

(2009) Fang-Chung Chen et al.   JOURNAL OF MATERIALS CHEMISTRY

Morphologies of Self-Organizing Regioregular Conjugated Polymer/Fullerene Aggregates in Thin Film Solar Cells

(2009) Mao-Yuan Chiu et al.   MACROMOLECULES

Buffer layer formation in organic photovoltaic cells by self-organization of poly(dimethylsiloxane)s

(2009) Shimpei Yamakawa et al.   ORGANIC ELECTRONICS

Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells

(2009) Claudio Girotto et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS