Microstructure and mechanical properties of multi-scale in-situ Mg2Si and CNTs hybrid reinforced AZ91D composites

The effect of Mg content and milling time on the solid solubility and microstructure of Ti–Mg alloys processed by mechanical milling

(2021) Song Jeng Huang et al.   Journal of Materials Research and Technology-JMR&T

Semisolid microstructural evolution of (CNTs + Sip)/AZ91D powder compacts prepared from powders by cold pressing and remelting

(2020) Pu-Bo Li et al.   RARE METALS

Strengthening of the magnesium matrix composites hybrid reinforced by chemically oxidized carbon nanotubes and in situ Mg2Sip

(2020) Pubo Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Failures analysis of in-situ Al–Mg2Si composites using actual microstructure based model

(2020) Prosanta Biswas et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Significantly improved particle strengthening of Al–Sc alloy by high Sc composition design and rapid solidification

(2020) Shuiqing Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Towards refining microstructures of biodegradable magnesium alloy WE43 by spark plasma sintering

(2019) Julie Soderlind et al.   Acta Biomaterialia

Significantly enhancing the strength + ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes

(2019) Jiangtao Hou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and synergistic strengthening mechanisms of carbon nanotubes and Mg2Si nanoparticles hybrid reinforced Mg matrix composites prepared by powder thixoforming

(2019) Pubo Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Enhanced formability of a magnesium alloy sheet via in-plane pre-strain paths

(2019) Qingshan Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of tungsten disulfide on microstructure and mechanical properties of AZ91 magnesium alloy manufactured by stir casting

(2019) Song-Jeng Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Achieving ultra-high strength and good ductility in AZ61 alloy composites containing hybrid micron SiC and carbon nanotubes reinforcements

(2019) M.Y. Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High performance carbon nanotube-reinforced magnesium nanocomposite

(2019) Yunpeng Ding et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of in-situ (TiC-TiB 2 ) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite

(2018) B.N. Sahoo et al.   MATERIALS CHARACTERIZATION

Tribological Behavior of Carbon Nanotube-Reinforced AZ91D Composites Processed by Cyclic Extrusion and Compression

(2018) Li Zhang et al.   TRIBOLOGY LETTERS

Designing a magnesium alloy with high strength and high formability

(2018) T. T. T. Trang et al.   Nature Communications

Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion

(2017) Junhao Liang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide

(2017) Hamed Asgharzadeh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of SiC nanoparticles addition on the microstructural evolution and mechanical properties of AZ91 alloy during isothermal multidirectional forging

(2017) K.B. Nie et al.   MATERIALS CHARACTERIZATION

Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

(2017) Xiaoqing Liu et al.   MATERIALS CHARACTERIZATION

Oxidation, defunctionalization and catalyst life cycle of carbon nanotubes: a Raman spectroscopy view

(2017) Sergei A. Chernyak et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

A micro-sized Si–CNT anode for practical application via a one-step, low-cost and green method

(2017) Chao Li et al.   RSC Advances

Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles

(2016) M.J. Shen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved mechanical properties of Mg matrix composites reinforced with Al and carbon nanotubes fabricated by spark plasma sintering followed by hot extrusion

(2016) Yan Yan et al.   JOURNAL OF MATERIALS RESEARCH

Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding

(2016) Sajjad Amirkhanlou et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of CNT volume fraction on wear properties of hybrid CNT+SiCsf/AS52 Mg matrix composites

(2016) Byoung Woo Lee et al.   METALS AND MATERIALS INTERNATIONAL

Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties

(2016) Shulin Xiang et al.   Scientific Reports

Synergistic strengthening effect of graphene-carbon nanotube hybrid structure in aluminum matrix composites

(2015) Zan Li et al.   CARBON

Significantly improved strength and ductility in bimodal-size grained microstructural magnesium matrix composites reinforced by bimodal sized SiCp over traditional magnesium matrix composites

(2015) M.J. Shen et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Use of high energy ball milling to study the role of graphene nanoplatelets and carbon nanotubes reinforced magnesium alloy

(2015) Muhammad Rashad et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets (Al+GNPs) using semi powder metallurgy method

(2015) Muhammad Rashad et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Effect of Graphene Nanoplate and Silicon Carbide Nanoparticle Reinforcement on Mechanical and Tribological Properties of Spark Plasma Sintered Magnesium Matrix Composites

(2014) Aniruddha Das et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Comparative study of carbon nanotube dispersion using surfactants

(2008) Richa Rastogi et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

The Role of Interfacial Oxygen Atoms in the Enhanced Mechanical Properties of Carbon-Nanotube-Reinforced Metal Matrix Nanocomposites

(2008) Kyung Tae Kim et al.   Small