Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

(2020) Xingan Shuai et al.   JOURNAL OF MATERIALS SCIENCE

Influence of Vacuum Debinding Temperature on Microstructure and Mechanical Properties of Three-Dimensional-Printed Alumina via Stereolithography

(2020) He Li et al.   3D Printing and Additive Manufacturing

Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores

(2020) He Li et al.   Journal of Advanced Ceramics

Fabrication of dense aluminum nitride ceramics via digital light processing-based stereolithography

(2020) Lifu Lin et al.   MATERIALS CHEMISTRY AND PHYSICS

Improved sintering ability of SiC ceramics from SiC@Al2O3 core-shell nanoparticles prepared by a slow precipitation method

(2019) Yiteng Liu et al.   CERAMICS INTERNATIONAL

Preparation of alumina-toughened zirconia via 3D printing and liquid precursor infiltration: manipulation of the microstructure, the mechanical properties and the low temperature aging behavior

(2019) Haidong Wu et al.   JOURNAL OF MATERIALS SCIENCE

Design of Optimal Organic Materials System for Ceramic Suspension‐Based Additive Manufacturing

(2019) Kyeongwoon Chung et al.   ADVANCED ENGINEERING MATERIALS

Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches

(2019) Oscar Santoliquido et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Injection molding, debinding and sintering of ZrO2 ceramic modified by silane couping agent

(2019) Lijian Deng et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Effects of porosity on electrical and thermal conductivities of porous SiC ceramics

(2019) Shynar Kultayeva et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method

(2018) Rongxuan He et al.   CERAMICS INTERNATIONAL

Effect of rare earth ions doping on the thermal properties of YAG transparent ceramics

(2018) Jan Hostaša et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Effect of plasticizer on the fabrication and properties of alumina ceramic by stereolithography-based additive manufacturing

(2018) Zhanwen Xing et al.   CERAMICS INTERNATIONAL

Microstructure and improved mechanical properties of Al2O3/Ba-β-Al2O3/ZrO2 composites with YSZ addition

(2018) Lei Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

3D printing of dense structural ceramic microcomponents with low cost: Tailoring the sintering kinetics and the microstructure evolution

(2018) Wei Liu et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

A strategy for defects healing in 3D printed ceramic compact via cold isostatic pressing: Sintering kinetic window and microstructure evolution

(2018) Di An et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

3D printing of ceramics: A review

(2018) Zhangwei Chen et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Strengthening mechanisms based on reinforcement distribution uniformity for particle reinforced aluminum matrix composites

(2018) Gang CHEN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts

(2018) Dmitrii Komissarenko et al.   Materials

Additive manufacturing and characterization of complex Al2 O3 parts based on a novel stereolithography method

(2017) Di An et al.   International Journal of Applied Ceramic Technology

Measurement of surface tension of liquid microdroplets through observation of droplet collision

(2017) Daichi Hayakawa et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

Surface modification of α-Al 2 O 3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions

(2017) Shuai Zhang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Material issues in additive manufacturing: A review

(2017) Sunpreet Singh et al.   Journal of Manufacturing Processes

Thermal characteristics of a two-phase composite

(2016) Hsiu-Ching Hsu et al.   ADVANCED POWDER TECHNOLOGY

Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography – Optimization of the drying and debinding processes

(2016) Maopeng Zhou et al.   CERAMICS INTERNATIONAL

Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography

(2016) Haidong Wu et al.   CERAMICS INTERNATIONAL

Alumina/YAG 20vol% composites prepared by the dawsonite thermal decomposition

(2015) Radosław Lach et al.   CERAMICS INTERNATIONAL

과립화 공정과 Y2O3 첨가제에 의한 알루미나 세라믹스의 기계적 특성 향상

(2015) Jung-Sik Kim et al.   Korean Journal of Metals and Materials

Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting

(2015) Xuan Song et al.   Journal of Manufacturing Processes

Processing and Characterization of Aluminum Nitride Ceramics for High Thermal Conductivity

(2014) Hyun Min Lee et al.   ADVANCED ENGINEERING MATERIALS

Additive Manufacturing of Dense Alumina Ceramics

(2014) Martin Schwentenwein et al.   International Journal of Applied Ceramic Technology

Densification of fine-grained alumina ceramics doped by magnesia, yttria and zirconia evaluated by two different sintering models

(2014) Karel Maca et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Fracture behaviour of alumina-YAG particulate composites

(2014) Radosław Lach et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Pressureless sintering behavior of injection molded alumina ceramics

(2014) W. Liu et al.   SCIENCE OF SINTERING

Partial wet route for YAG powders synthesis leading to transparent ceramic: A core–shell solid-state reaction process

(2013) Yuanhua Sang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Phase composition and microstructure of yttrium aluminum garnet (YAG) coatings prepared by suspension plasma spraying of Y2O3–Al2O3 powders

(2013) Dong Zhao et al.   SURFACE & COATINGS TECHNOLOGY

Plasma sprayed TiB2–Ni cermet coatings: Effect of feedstock characteristics on the microstructure and tribological performance

(2013) Hong Bin Zhu et al.   SURFACE & COATINGS TECHNOLOGY

Lithography-Based Additive Manufacturing of Cellular Ceramic Structures

(2012) Ruth Felzmann et al.   ADVANCED ENGINEERING MATERIALS

Gelcasting of alumina ceramics with improved green strength

(2012) Rui Xie et al.   CERAMICS INTERNATIONAL

Effect of preparation route on the properties of slip-casted Al2O3/YAG composites

(2012) F. Sommer et al.   CERAMICS INTERNATIONAL

Novel Preparation of Translucent Alumina Ceramics Induced by Doping Additives via Chemical Precipitation Method

(2011) Wei Liu et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

The influence of additives on microstrucutre of sub-micron alumina ceramics prepared by two-stage sintering

(2011) Dušan Galusek et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Review of Net Shape Fabrication of Thermally Conducting Ceramics

(2011) Valmikanathan Onbattuvelli et al.   MATERIALS AND MANUFACTURING PROCESSES

Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics

(2010) Zahra Negahdari et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Thermal fatigue behaviour of Al2O3-DBC substrates under high temperature cyclic loading

(2010) Guangcheng Dong et al.   SOLDERING & SURFACE MOUNT TECHNOLOGY

Fabrication of Blue-Colored Zirconia Ceramics via Heterogeneous Nucleation Method

(2009) Wei Wang et al.   CRYSTAL GROWTH & DESIGN

Force transmission in dry and wet granular media

(2008) Vincent Richefeu et al.   POWDER TECHNOLOGY

Surface chemistry study of LiCoO2 coated with alumina

(2008) Nina Kosova et al.   SOLID STATE IONICS