Suppression of the High-Frequency Errors in Surface Topography Measurements Based on Comparison of Various Spline Filtering Methods
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Suppression of the High-Frequency Errors in Surface Topography Measurements Based on Comparison of Various Spline Filtering Methods
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 17, Pages 5096
Publisher
MDPI AG
Online
2021-09-07
DOI
10.3390/ma14175096
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Fast Fourier Transform detection and reduction of high-frequency errors from the results of surface topography profile measurements of honed textures
- (2021) Przemysław Podulka Eksploatacja i Niezawodnosc-Maintenance and Reliability
- Reduction of Influence of the High-Frequency Noise on the Results of Surface Topography Measurements
- (2021) Przemysław Podulka Materials
- Improved Procedures for Feature-Based Suppression of Surface Texture High-Frequency Measurement Errors in the Wear Analysis of Cylinder Liner Topographies
- (2021) Przemysław Podulka Metals
- Cutting Forces and Tool Wear Investigation during Turning of Sintered Nickel-Cobalt Alloy with CBN Tools
- (2021) Wojciech Zębala et al. Materials
- Fractional spline wavelets within the surface texture analysis
- (2021) Damian Gogolewski MEASUREMENT
- The Effect of Surface Topography Feature Size Density and Distribution on the Results of a Data Processing and Parameters Calculation with a Comparison of Regular Methods
- (2021) Przemysław Podulka Materials
- Effect of Lubricant Type on the Friction Behaviours and Surface Topography in Metal Forming of Ti-6Al-4V Titanium Alloy Sheets
- (2021) Marcin Szpunar et al. Materials
- Numerical Simulation of Ultrasonic-Assisted Grinding Surfaces With Fast Fourier Transform
- (2020) Lin Li et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Definition and evaluation of topography measurement noise in optical instruments
- (2020) Peter de Groot et al. OPTICAL ENGINEERING
- Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper and Brass
- (2020) Mirosław Szala et al. Metals
- Metrological characteristics for the calibration of surface topography measuring instruments: a review
- (2020) Richard K Leach et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Material ratio curve as information on the state of surface topography—A review
- (2020) Pawel Pawlus et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Profile and Areal Surface Parameters for Fatigue Fracture Characterisation
- (2020) Wojciech Macek et al. Materials
- Assessment of the classification ability of parameters characterizing surface topography formed in manufacturing and operation processes
- (2020) Wojciech Kacalak et al. MEASUREMENT
- Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate
- (2019) Szala et al. Coatings
- Comparison of three focus sensors for optical topography measurement of rough surfaces
- (2019) Martin Šarbort et al. OPTICS EXPRESS
- Influence of noise on the fractal dimension of measured surface topography
- (2019) Xue Zuo et al. MEASUREMENT
- A Wavelet Packet Tree Denoising Algorithm for Images of Atomic-Force Microscopy
- (2018) Manuel Schimmack et al. ASIAN JOURNAL OF CONTROL
- Investigating the quality inspection process of offshore wind turbine blades using B-spline surfaces
- (2018) Dominic Auger et al. MEASUREMENT
- Improved zero-order fringe positioning algorithms in white light interference based atomic force microscopy
- (2018) Chi Hu et al. OPTICS AND LASERS IN ENGINEERING
- The machine learning method of phase extraction in interferometry
- (2018) Chuqian Zhong et al. OPTICS AND LASERS IN ENGINEERING
- An improved signal determination method on machined surface topography
- (2018) Jingjing Sun et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- High definition metrology enabled three dimensional discontinuous surface filtering by extended tetrolet transform
- (2018) Yiping Shao et al. JOURNAL OF MANUFACTURING SYSTEMS
- A Non-Contact Measuring System for In-Situ Surface Characterization Based on Laser Confocal Microscopy
- (2018) Shaowei Fu et al. SENSORS
- An on-line orthogonal wavelet denoising algorithm for high-resolution surface scans
- (2017) Manuel Schimmack et al. JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS
- De-noising of digital image correlation based on stationary wavelet transform
- (2017) Xiang Guo et al. OPTICS AND LASERS IN ENGINEERING
- Quantitative characterization of surface topography using spectral analysis
- (2017) Tevis D B Jacobs et al. Surface Topography-Metrology and Properties
- Surface morphology analysis of Duplex Stainless Steel (DSS) in Clean Production using the Power Spectral Density
- (2016) G.M. Krolczyk et al. MEASUREMENT
- Measurement technologies for precision positioning
- (2015) W. Gao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A rotating scan scheme for automatic outlier removal in laser scanning of reflective surfaces
- (2015) Yutao Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analysis of the boundary conditions of the spline filter
- (2015) Mingsi Tong et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Applications of the spline filter for areal filtration
- (2015) Mingsi Tong et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Principles of interference microscopy for the measurement of surface topography
- (2015) Peter de Groot Advances in Optics and Photonics
- An Areal Isotropic Spline Filter for Surface Metrology
- (2015) Hao Zhang et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Peaks and jumps reconstruction with B-splines scaling functions
- (2014) Luis Ortiz-Gracia et al. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS
- Possibilities of oil pockets creation by the burnishing technique
- (2013) W. Koszela et al. Archives of Civil and Mechanical Engineering
- A two-dimensional isotropic spline filter
- (2013) Dariusz Janecki PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- The measurement and analysis of surface geometric structure of ceramic femoral heads
- (2013) M. Niemczewska-Wójcik et al. SCANNING
- Roughness and function
- (2013) T R Thomas Surface Topography-Metrology and Properties
- Fractal analysis of engineering ceramics ground surface
- (2012) Xiaohu Liang et al. APPLIED SURFACE SCIENCE
- Technological shifts in surface metrology
- (2012) X. Jane Jiang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Outlier filtering: a new method for improving the quality of surface measurements
- (2012) G Le Goic et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Calibration of the scales of areal surface topography-measuring instruments: part 1. Measurement noise and residual flatness
- (2012) Claudiu L Giusca et al. MEASUREMENT SCIENCE and TECHNOLOGY
- White-light interferometry—Envelope detection by Hilbert transform and influence of noise
- (2012) Pavel Pavliček et al. OPTICS AND LASERS IN ENGINEERING
- The spline filter: A regularization approach for the Gaussian filter
- (2012) Hao Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Freeform surface filtering using the lifting wavelet transform
- (2012) Hussein S. Abdul-Rahman et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Nanoscale measurement of the power spectral density of surface roughness: how to solve a difficult experimental challenge
- (2012) Juan González Martínez et al. Nanoscale Research Letters
- Modified Fourier-transform method for phase-shift calibration
- (2011) Fuzhong Bai et al. OPTICS AND LASERS IN ENGINEERING
- Edge effect elimination in the recursive implementation of Gaussian filters
- (2011) Dariusz Janecki PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Robust solution for the evaluation of stratified functional surfaces
- (2010) X. Jiang CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tetrolet transform: A new adaptive Haar wavelet algorithm for sparse image representation
- (2010) Jens Krommweh JOURNAL OF VISUAL COMMUNICATION AND IMAGE REPRESENTATION
- A universal spline filter for surface metrology
- (2010) Hao Zhang et al. MEASUREMENT
- An outlier correction procedure and its application to areal surface data measured by optical instruments
- (2010) Mohd Fauzi Ismail et al. MEASUREMENT SCIENCE and TECHNOLOGY
- A generalised linear and nonlinear spline filter
- (2010) W. Zeng et al. WEAR
- Recent trends in surface metrology
- (2010) T.G. Mathia et al. WEAR
- A generalized -spline filter
- (2009) Dariusz Janecki MEASUREMENT
- An optimal discrete operator for the two-dimensional spline filter
- (2009) Tomonori Goto et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase extraction from a single fringe pattern in fringe projection profilometry
- (2009) Lei Huang et al. OPTICS AND LASERS IN ENGINEERING
- Noise in phase shifting interferometry
- (2009) M. Servin et al. OPTICS EXPRESS
- Fractal analyses of ITO thin films: A study based on power spectral density
- (2009) Davood Raoufi PHYSICA B-CONDENSED MATTER
- Multivariate empirical mode decomposition
- (2009) N. Rehman et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Wavelets and their applications for surface metrology
- (2008) X. Jiang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Improvement of signal-to-noise ratio in digital holography using wavelet transform
- (2007) Akshay Sharma et al. OPTICS AND LASERS IN ENGINEERING
- Sophisticated filtration technique for 3D surface topography data of rectangular area
- (2007) Hikaru Hanada et al. WEAR
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started