Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 13, Pages 3689
Publisher
MDPI AG
Online
2021-07-02
DOI
10.3390/ma14133689
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Performance Improvement of Base Fluid Heat Transfer Medium Using Nano Fluid Particles
- (2021) T. Sathish JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS
- Synthesis and Optimization of AA 7175 – Zirconium Carbide (ZrC) Composites Machining Parameters
- (2021) T. Sathish et al. JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS
- Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel
- (2021) Mohammad Nishat Akhtar et al. Materials
- Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites
- (2021) Santhosh Nagaraja et al. Materials
- Mechanical and Corrosion Studies of Friction Stir Welded Nano Al2O3 Reinforced Al-Mg Matrix Composites: RSM-ANN Modelling Approach
- (2021) Chandrashekar A. et al. Symmetry-Basel
- Multi Ceramic Particles Inclusion in the Aluminium Matrix and Wear Characterization through Experimental and Response Surface-Artificial Neural Networks
- (2021) Ballupete Nagaraju Sharath et al. Materials
- Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and Optimized Process Parameters
- (2021) Thanikodi Sathish et al. Materials
- Effect of hybrid reinforcement on microstructure and mechanical properties of AZ61 magnesium alloy processed by stir casting method
- (2021) Song-Jeng Huang et al. COMPOSITES COMMUNICATIONS
- Surface Analysis of Wire-Electrical-Discharge-Machining-Processed Shape-Memory Alloys
- (2020) Rakesh Chaudhari et al. Materials
- Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics
- (2019) V. Kavimani et al. COMPOSITES PART B-ENGINEERING
- EDM investigation of Al 7075 alloy reinforced with B4C and fly ash nanoparticles and parametric optimization for sustainable production
- (2018) Sweety Mahanta et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Effects of Wire Electro-Discharge Machining Process Parameters on the Machined Surface of Ti50Ni49Co1 Shape Memory Alloy
- (2018) Hargovind Soni et al. Silicon
- Investigation and optimization of the electro-discharge machining parameters of 2024 aluminum alloy and Al/7.5% Al2O3 particulate-reinforced metal matrix composite
- (2018) Saeed Daneshmand et al. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
- Analysis of the influence of cutting parameters on surface roughness and cutting forces in high speed face milling of Al/SiC MMC
- (2018) Reza Ghoreishi et al. Materials Research Express
- Experimental Investigation and Optimization of Machining Parameters in WEDM of Nano-SiC Particles Reinforced Magnesium Matrix Composites
- (2018) S. Vijayabhaskar et al. Silicon
- WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters
- (2017) P. M. Gopal et al. MATERIALS AND MANUFACTURING PROCESSES
- Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles
- (2016) M.J. Shen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of nano/micro B4C and SiC particles on fracture properties of aluminum 7075 particulate composites under chevron-notch plane strain fracture toughness test
- (2016) M R Morovvati et al. Materials Research Express
- Surface chemistry modification for elimination of hydrophilic Al 4 C 3 in B 4 C/Al composites
- (2016) E. Trujillo-Vázquez et al. MATERIALS & DESIGN
- Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles
- (2015) A. Fadavi Boostani et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- In-situ development of ZrB2 particles and their effect on microstructure and mechanical properties of AA5052 metal-matrix composites
- (2015) Narendra Kumar et al. MATERIALS & DESIGN
- Synthesis and characterization of dual particle (MWCT+B4C) reinforced sintered hybrid aluminum matrix composites
- (2015) S. Dhandapani et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Investigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology
- (2015) Ali Riza Motorcu et al. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
- Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis
- (2015) S. Suresh Kumar et al. Journal of Manufacturing Processes
- Fabrication and characterization of carbon nanotube reinforced magnesium matrix composites
- (2014) Harun Mindivan et al. APPLIED SURFACE SCIENCE
- Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites
- (2014) Thella Babu Rao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach
- (2014) Mehdi Hourmand et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Synthesis and characterization of sintered hybrid aluminium matrix composites reinforced with nanocopper oxide particles and microsilicon carbide particles
- (2013) T. Rajmohan et al. COMPOSITES PART B-ENGINEERING
- Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach
- (2013) Palani Sivaprakasam et al. MATERIALS AND MANUFACTURING PROCESSES
- Modeling and Optimization of Medium-Speed WEDM Process Parameters for Machining SKD11
- (2013) Guojun Zhang et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel
- (2013) Ravindranadh Bobbili et al. MATERIALS AND MANUFACTURING PROCESSES
- Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiCp MMC
- (2013) Thella Babu Rao et al. Advances in Manufacturing
- Artificial Neural Network Modeling to Evaluate and Predict the Deformation Behavior of ZK60 Magnesium Alloy During Hot Compression
- (2010) Y. J. Qin et al. MATERIALS AND MANUFACTURING PROCESSES
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started