Selective Laser Melting of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, and Morphological and Mechanical Characterization
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Selective Laser Melting of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, and Morphological and Mechanical Characterization
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 15, Pages 4240
Publisher
MDPI AG
Online
2021-07-29
DOI
10.3390/ma14154240
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Polyamide 12 Materials Study of Morpho-Structural Changes during Laser Sintering of 3D Printing
- (2021) Gražyna Simha Martynková et al. Polymers
- Investigating the Dimensional and Geometric Accuracy of Laser-Based Powder Bed Fusion of PA2200 (PA12): Experiment Design and Execution
- (2021) Torbjørn Langedahl Leirmo et al. Applied Sciences-Basel
- Hydrolytic degradation of porous poly(hydroxybutyrate-co-hydroxyvalerate) scaffolds manufactured using selective laser sintering
- (2021) Rushabh Patel et al. POLYMER DEGRADATION AND STABILITY
- The role of additive manufacturing for biomedical applications: A critical review
- (2021) Rakesh Kumar et al. Journal of Manufacturing Processes
- Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty
- (2020) Ahmed Moussa et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
- (2020) Lydia Lanzl et al. POLYMER TESTING
- The Application of 3D Printing Patient Specific Instrumentation Model in Total Knee Arthroplasty
- (2020) Fengxin Zhou et al. SAUDI JOURNAL OF BIOLOGICAL SCIENCES
- Service life characterization of orthopedic implant material made of ultra-high molecular weight polyethylene under physiological conditions
- (2020) Nils Wegner et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development of Polyoxymethylene Particles via the Solution-Dissolution Process and Application to the Powder Bed Fusion of Polymers
- (2020) Maximilian A. Dechet et al. Materials
- Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process
- (2020) Dan Ioan Stoia et al. Polymers
- Experimental investigating and numerical simulations of the thermal behavior and process optimization for selective laser sintering of PA6
- (2020) Maoyuan Li et al. Journal of Manufacturing Processes
- Study on compressive strength characteristics of selective inhibition sintered UHMWPE specimens based on ANN and RSM approach
- (2020) Tesfaye Kebede Ali et al. CIRP Journal of Manufacturing Science and Technology
- Effect of powder recycling on anisotropic tensile properties of selective laser sintered PA2200 polyamide
- (2020) Bibo Yao et al. EUROPEAN POLYMER JOURNAL
- Capabilities and Limitations of Using Desktop 3-D Printers in the Laser Sintering Process
- (2020) Michał Olejarczyk et al. Applied Sciences-Basel
- 3D Printing Hip Prostheses Offer Accurate Reconstruction, Stable Fixation, and Functional Recovery for Revision Total Hip Arthroplasty with Complex Acetabular Bone Defect
- (2020) Yongqiang Hao et al. Engineering
- Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering
- (2019) Dan Stoia et al. Materials
- A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters
- (2018) Thomas Stichel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The improvement of mechanical and thermal properties of polyamide 12 3D printed parts by fused deposition modelling
- (2017) T. N. A. T. Rahim et al. Express Polymer Letters
- Effect of different initial finishes and Parylene coating thickness on the surface properties of coated PMMA
- (2016) Sofia Bourlidi et al. JOURNAL OF PROSTHETIC DENTISTRY
- The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities
- (2016) Xijin Hua et al. MEDICAL ENGINEERING & PHYSICS
- Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility
- (2015) Yingying Du et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Acetabular reconstruction using 3D printing in revision hip arthroplasty
- (2015) A. Hughes et al. International Journal of Surgery
- Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
- (2014) S. Berretta et al. EUROPEAN POLYMER JOURNAL
- Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions
- (2014) Xijin Hua et al. JOURNAL OF BIOMECHANICS
- Experimental validation of finite element modelling of a modular metal-on-polyethylene total hip replacement
- (2014) Xijin Hua et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Deposition, characterization, and in vivo performance of parylene coating on general-purpose silicone for examining potential biocompatible surface modifications
- (2013) Chia-Man Chou et al. THIN SOLID FILMS
- Edge Loading Has a Paradoxical Effect on Wear in Metal-on-Polyethylene Total Hip Arthroplasties
- (2012) William H. Harris CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Statistical evaluation of laser energy density effect on mechanical properties of polyamide parts manufactured by selective laser sintering
- (2009) V. E. Beal et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering
- (2009) S. Cahill et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Friction couples in total hip replacement
- (2009) N. Passuti et al. Orthopaedics & Traumatology-Surgery & Research
- Predictability of Plastic Parts Behaviour Made from Rapid Manufacturing
- (2009) Mario Monzón et al. TSINGHUA SCIENCE AND TECHNOLOGY
- Nanostructural self-organization under selective laser sintering of exothermic powder mixtures
- (2008) I. Shishkovsky et al. APPLIED SURFACE SCIENCE
- Study of Micromotion in Modular Acetabular Components During Gait and Subluxation: A Finite Element Investigation
- (2008) F. Amirouche et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now