Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D

Multidentate anchoring through additive engineering for highly efficient Sb2S3 planar thin film solar cells

(2021) Jian Han et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL

(2020) Soma Zandi et al.   SOLAR ENERGY

Enhancement in the efficiency of Sb2Se3 solar cells by adding low lattice mismatch CuSbSe2 hole transport layer

(2020) Qingfei Cang et al.   SOLAR ENERGY

Numerical analysis of earth-abundant Cu2ZnSn(SxSe1-x)4 solar cells based on Spectroscopic Ellipsometry results by using SCAPS-1D

(2020) Lhoussayne Et-taya et al.   SOLAR ENERGY

Two stage modelling of solar photovoltaic cells based on Sb2S3 absorber with three distinct buffer combinations

(2020) M.T. Islam et al.   SOLAR ENERGY

Effects of substrate temperature and SnO2 high resistive layer on Sb2Se3 thin film solar cells prepared by pulsed laser deposition

(2020) Ke Yang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fundamental Physical Characterization of Sb2Se3-Based Quasi-Homojunction Thin Film Solar Cells

(2020) Donglou Ren et al.   ACS Applied Materials & Interfaces

Performance investigation of Sb2Se3 based solar cell by device optimization, band offset engineering and Hole Transport Layer in SCAPS-1D

(2020) Faisal Baig et al.   CURRENT APPLIED PHYSICS

Fabrication of Sb2S3 thin films by magnetron sputtering and post-sulfurization/selenization for substrate structured solar cells

(2020) Jingting Luo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A comparative study of different buffer layers for CZTS solar cell using Scaps-1D simulation program

(2020) F. Belarbi et al.   OPTIK

Towards high efficiency Cd-Free Sb2Se3 solar cells by the band alignment optimization

(2020) Iman Gharibshahian et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV

(2020) Guang-Xing Liang et al.   Nano Energy

Open-Circuit Voltage Loss of Antimony Chalcogenide Solar Cells: Status, Origin, and Possible Solutions

(2020) Chao Chen et al.   ACS Energy Letters

An optimized lead-free formamidinium Sn-based perovskite solar cell design for high power conversion efficiency by SCAPS simulation

(2020) Manish Kumar et al.   OPTICAL MATERIALS

Numerical simulation and performance optimization of Sb2S3 solar cell with a hole transport layer

(2020) Youpeng Xiao et al.   OPTICAL MATERIALS

Numerical simulation of highly efficient lead-free all-perovskite tandem solar cell

(2020) Neelima Singh et al.   SOLAR ENERGY

Efficient Sb2Se3/CdS planar heterojunction solar cells in substrate configuration with (hk0) oriented Sb2Se3 thin films

(2020) Kunal J. Tiwari et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Deposition of Sb2Se3 thin films on Pt substrate via electro-chemical atomic layer epitaxy (EC-ALE)

(2020) Fatima Haidar et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Performance enhancement of Sb2Se3 solar cell using a back surface field layer: A numerical simulation approach

(2020) Sheikh Rashel Al Ahmed et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

9.2%-efficient core-shell structured antimony selenide nanorod array solar cells

(2019) Zhiqiang Li et al.   Nature Communications

Photovoltaic solar cell technologies: analysing the state of the art

(2019) Pabitra K. Nayak et al.   Nature Reviews Materials

Substrate structured Sb2S3 thin film solar cells fabricated by rapid thermal evaporation method

(2019) Guoxing Pan et al.   SOLAR ENERGY

An optimized perovskite solar cell designs for high conversion efficiency

(2019) Abdelkader Hima et al.   SUPERLATTICES AND MICROSTRUCTURES

Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation

(2019) Liping Guo et al.   APL Materials

Planar Heterojunction Solar Cell Employing a Single-Source Precursor Solution-Processed Sb2S3 Thin Film as the Light Absorber

(2019) Muthusamy Tamilselvan et al.   ACS Omega

5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer

(2019) Xiaobo Hu et al.   Applied Materials Today

Fabrication of Sb2Se3 thin film solar cells by co-sputtering of Sb2Se3 and Se targets

(2019) Changhao Ma et al.   SOLAR ENERGY

A theoretical study on Sb2S3 solar cells: The path to overcome the efficiency barrier of 8%

(2019) Maykel Courel et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Enhanced open circuit voltage of Sb2Se3/CdS solar cells by annealing Se-rich amorphous Sb2Se3 films prepared via sputtering process

(2019) Xinsheng Liu et al.   SOLAR ENERGY

Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation

(2019) Atanu Bag et al.   SOLAR ENERGY

Rapid growth of Sb 2 S 3 thin films by chemical bath deposition with ethylenediamine tetraacetic acid additive

(2018) U. Chalapathi et al.   APPLIED SURFACE SCIENCE

Analysis of Sb 2 Se 3 /CdS based photovoltaic cell: A numerical simulation approach

(2018) Ling-yan Lin et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency

(2018) Xixing Wen et al.   Nature Communications

Sb2(S1−x Se x )3 solar cells: the impact of radiative and non-radiative loss mechanisms

(2018) Thalía Jiménez et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Enhanced Photovoltaic Properties in Sb2S3 Planar Heterojunction Solar Cell with a Fast Selenylation Approach

(2018) Kun Wang et al.   Nanoscale Research Letters

Impact of post-deposition annealing in Cu2SnS3 thin film solar cells prepared by doctor blade method

(2018) Arindam Basak et al.   VACUUM

Post-growth annealing effect on the performance of Cu2SnSe3 solar cells

(2018) Arindam Basak et al.   Materials Research Express

First-Principles Analysis of Radiative Recombination in Lead-Halide Perovskites

(2018) Xie Zhang et al.   ACS Energy Letters

Interfacial Engineering by Indium-Doped CdS for High Efficiency Solution Processed Sb2(S1–xSex)3 Solar Cells

(2018) Chunyan Wu et al.   ACS Applied Materials & Interfaces

Improved efficiency of Cu(In,Ga)Se2 thinfilm solar cells using a buffer layer alternative to CdS

(2018) Y.Z. Hamri et al.   SOLAR ENERGY

Magnetron sputtering deposition and selenization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells

(2018) Rong Tang et al.   SURFACE & COATINGS TECHNOLOGY

Solar cell efficiency tables (version 51)

(2017) Martin A. Green et al.   PROGRESS IN PHOTOVOLTAICS

Effects of heavy alkali elements in Cu(In,Ga)Se2solar cells with efficiencies up to 22.6%

(2016) Philip Jackson et al.   Physica Status Solidi-Rapid Research Letters

Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth

(2016) Shengjie Yuan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

(2015) Ying Zhou et al.   Nature Photonics

Highly Improved Sb2S3Sensitized-Inorganic-Organic Heterojunction Solar Cells and Quantification of Traps by Deep-Level Transient Spectroscopy

(2014) Yong Chan Choi et al.   ADVANCED FUNCTIONAL MATERIALS

Theoretical review of series resistance determination methods for solar cells

(2014) G.M.M.W. Bissels et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Analysis of the forward and reverse bias I-V and C-V characteristics on Al/PVA:n-PbSe polymer nanocomposites Schottky diode

(2012) S. K. Tripathi et al.   JOURNAL OF APPLIED PHYSICS

Advanced electrical simulation of thin film solar cells

(2012) Marc Burgelman et al.   THIN SOLID FILMS

Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4absorber

(2011) Byungha Shin et al.   PROGRESS IN PHOTOVOLTAICS