Study on the pyrolysis behaviors of mixed waste plastics

Thermal behavior, kinetics and gas evolution characteristics for the co-pyrolysis of real-world plastic and tyre wastes

(2020) Qiang Hu et al.   JOURNAL OF CLEANER PRODUCTION

Sustainable production of value-added carbon nanomaterials from biomass pyrolysis

(2020) Shun Zhang et al.   Nature Sustainability

Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln

(2020) Yutao Zhang et al.   FUEL PROCESSING TECHNOLOGY

Two-stage pyrolysis of polystyrene: Pyrolysis oil as a source of fuels or benzene, toluene, ethylbenzene, and xylenes

(2019) Ki-Bum Park et al.   APPLIED ENERGY

The fate of chlorine during MSW incineration: Vaporization, transformation, deposition, corrosion and remedies

(2019) Wenchao Ma et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Synergistic effects in steam gasification of combined biomass and plastic waste mixtures

(2018) K.G. Burra et al.   APPLIED ENERGY

A mechanistic model of fast pyrolysis of hemicellulose

(2018) Xiaowei Zhou et al.   Energy & Environmental Science

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

(2018) Fanfan Xu et al.   ENERGY CONVERSION AND MANAGEMENT

Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET—Part I: Production and physical properties

(2018) Stanislav Honus et al.   FUEL

TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)

(2018) Xingping Kai et al.   ENERGY CONVERSION AND MANAGEMENT

A Compact Kinetic Model for Biomass Pyrolysis at Gasification Conditions

(2017) Himanshu Goyal et al.   ENERGY & FUELS

Co-pyrolysis characters between combustible solid waste and paper mill sludge by TG-FTIR and Py-GC/MS

(2017) Shiwen Fang et al.   ENERGY CONVERSION AND MANAGEMENT

Influence of pyrolysis temperature and production unit on formation of selected PAHs, oxy-PAHs, N-PACs, PCDDs, and PCDFs in biochar—a screening study

(2017) Eva Weidemann et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

An overview of advances in biomass gasification

(2016) Vineet Singh Sikarwar et al.   Energy & Environmental Science

Determination of microplastic polyethylene (PE) and polypropylene (PP) in environmental samples using thermal analysis (TGA-DSC)

(2016) Marius Majewsky et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Co-pyrolysis between microalgae and textile dyeing sludge by TG–FTIR: Kinetics and products

(2015) Xiaowei Peng et al.   ENERGY CONVERSION AND MANAGEMENT

Pyrolysis behaviors and kinetic studies on Eucalyptus residues using thermogravimetric analysis

(2015) Zhihua Chen et al.   ENERGY CONVERSION AND MANAGEMENT

How to determine consistent biomass pyrolysis kinetics in a parallel reaction scheme

(2014) Andrés Anca-Couce et al.   FUEL

Pyrolysis technologies for municipal solid waste: A review

(2014) Dezhen Chen et al.   WASTE MANAGEMENT

Nascent tar formation during polyvinylchloride (PVC) pyrolysis

(2012) Ben Gui et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques

(2011) Surjit Singh et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

(2011) M. Arabiourrutia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Steam gasification of tyre waste, poplar, and refuse-derived fuel: A comparative analysis

(2008) S. Galvagno et al.   WASTE MANAGEMENT

Pyrolysis characteristics of organic components of municipal solid waste at high heating rates

(2008) Jiao Zheng et al.   WASTE MANAGEMENT

TG-FTIR analysis of PVC thermal degradation and HCl removal

(2007) H.M. Zhu et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS