Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
Authors
Keywords
Additive manufacturing, 3D printing, Powder bed fusion, Selective laser melting, Processing parameters, In-situ, alloying, Multi-material, Machine learning
Journal
PROGRESS IN MATERIALS SCIENCE
Volume 119, Issue -, Pages 100795
Publisher
Elsevier BV
Online
2021-03-18
DOI
10.1016/j.pmatsci.2021.100795
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Microstructure and Mechanical Property of Ti-5Al-2.5Sn/Ti-6Al-4V Dissimilar Titanium Alloys Integrally Fabricated by Selective Laser Melting
- (2020) Kaiwen Wei et al. JOM
- Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders
- (2020) Chao Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion
- (2020) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A review of geometric sensitivities in laser metal 3D printing
- (2020) Vedant Chahal et al. Virtual and Physical Prototyping
- Mesoscopic study of thermal behavior, fluid dynamics and surface morphology during selective laser melting of Ti-based composites
- (2020) Donghua Dai et al. COMPUTATIONAL MATERIALS SCIENCE
- Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting
- (2020) Heng Gu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Machine Learning in Additive Manufacturing: A Review
- (2020) Lingbin Meng et al. JOM
- Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying
- (2020) Peng Chen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material
- (2020) Rui Wang et al. POWDER TECHNOLOGY
- In-situ synthesised interlayer enhances bonding strength in additively manufactured multi-material hybrid tooling
- (2020) Chaolin Tan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications
- (2020) Sheng Huang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Hybridisation of microstructures from three classes of titanium alloys
- (2020) Ahmad Zafari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
- (2020) S. L. Sing et al. Virtual and Physical Prototyping
- Selective laser melting 316L/CuSn10 multi-materials: Processing optimization, interfacial characterization and mechanical property
- (2020) Keyu Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy
- (2020) Yuchao Bai et al. MATERIALS CHARACTERIZATION
- Dilution Ratio and the Resulting Composition Profile in Dissimilar Laser Powder Bed Fusion of AlSi10Mg and Al99.8
- (2020) Constantin Böhm et al. Metals
- 3D-printed porous titanium scaffolds incorporating niobium for high bone regeneration capacity
- (2020) Hang Liang et al. MATERIALS & DESIGN
- Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via laser powder bed fusion
- (2020) Sheng Huang et al. ACTA MATERIALIA
- Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting
- (2019) Mingkang Zhang et al. MATERIALS & DESIGN
- Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting
- (2019) Jie Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion
- (2019) Simon Ewald et al. Materials
- Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study
- (2019) Abdulsalam Abdulaziz Al-Tamimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In-situ alloying of AlSi10Mg+Si using Selective Laser Melting to control the coefficient of thermal expansion
- (2019) Theresa Hanemann et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
- (2019) Wenhui Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive Manufacturing of Horizontal and 3D Functionally Graded 316L/Cu10Sn Components via Multiple Material Selective Laser Melting
- (2019) Chao Wei et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Interfacial characterization and mechanical properties of 316L stainless steel/inconel 718 manufactured by selective laser melting
- (2019) Xinliang Mei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of Ti–35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
- (2019) J.C. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
- (2019) W.H. Yu et al. PROGRESS IN MATERIALS SCIENCE
- Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting
- (2019) Z. Sun et al. SCRIPTA MATERIALIA
- Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders
- (2019) Takeshi Nagase et al. MATERIALS & DESIGN
- Applying Neural-Network-Based Machine Learning to Additive Manufacturing: Current Applications, Challenges, and Future Perspectives
- (2019) Xinbo Qi et al. Engineering
- Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
- (2019) C. Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties of Ti–Re alloys manufactured by selective laser melting
- (2019) Kamil Majchrowicz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Quality assurance in metal powder bed fusion via deep-learning-based image classification
- (2019) Maximilian Hugo Kunkel et al. RAPID PROTOTYPING JOURNAL
- Corrosion Behavior of Selectively Laser Melted CoCrFeMnNi High Entropy Alloy
- (2019) Jie Ren et al. Metals
- Residual stress analysis of thin AlSi10Mg parts produced by Laser Powder Bed Fusion
- (2019) Alessandro Salmi et al. Virtual and Physical Prototyping
- Improvement on mechanical properties and corrosion resistance of titanium-tantalum alloys in-situ fabricated via selective laser melting
- (2019) Danlei Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism
- (2019) Young-Kyun Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Remelt processing and microstructure of selective laser melted Ti25Ta
- (2019) E.G. Brodie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser absorption behavior of randomly packed powder-bed during selective laser melting of SiC and TiB2 reinforced Al matrix composites
- (2019) Dongdong Gu et al. OPTICS AND LASER TECHNOLOGY
- Laser additive manufacturing of layered TiB2/Ti6Al4V multi-material parts: Understanding thermal behavior evolution
- (2019) Caiyan Chen et al. OPTICS AND LASER TECHNOLOGY
- Multi-objective optimisation of bio-inspired lightweight sandwich structures based on selective laser melting
- (2019) Liang Meng et al. Virtual and Physical Prototyping
- Microstructure modelling for metallic additive manufacturing: a review
- (2019) Joel Heang Kuan Tan et al. Virtual and Physical Prototyping
- Simulation, forming process and mechanical property of Cu-Sn-Ti/diamond composites fabricated by selective laser melting
- (2019) Jie Gan et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum
- (2019) Swee Leong Sing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy
- (2019) C. N. Kuo et al. Virtual and Physical Prototyping
- Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
- (2018) Qilin Guo et al. ACTA MATERIALIA
- Fluid and particle dynamics in laser powder bed fusion
- (2018) P. Bidare et al. ACTA MATERIALIA
- On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi
- (2018) Soheil Saedi et al. ACTA MATERIALIA
- Controllable mesostructure, magnetic properties of soft magnetic Fe-Ni-Si by using selective laser melting from nickel coated high silicon steel powder
- (2018) N. Kang et al. APPLIED SURFACE SCIENCE
- 3D printing of multiple metallic materials via modified selective laser melting
- (2018) Chao Wei et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fundamental analysis of the influence of powder characteristics in Selective Laser Melting of molybdenum based on a multi-physical simulation model
- (2018) K.-H. Leitz et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
- (2018) P. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing
- (2018) Igor Polozov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property
- (2018) Ruidi Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Energy efficiency contributions and losses during selective laser melting
- (2018) Pragya Mishra et al. JOURNAL OF LASER APPLICATIONS
- Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation
- (2018) Yu-Che Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process
- (2018) V. Gunenthiram et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
- (2018) Youwen Yang et al. Journal of the Mechanical Behavior of Biomedical Materials
- A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
- (2018) Marco Simonelli et al. MATERIALS CHARACTERIZATION
- High-strength silicon brass manufactured by selective laser melting
- (2018) C. Yang et al. MATERIALS LETTERS
- Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting
- (2018) Wei Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
- (2018) Swee Leong Sing et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Mechanical Properties of a Newly Additive Manufactured Implant Material Based on Ti-42Nb
- (2018) Christian Schulze et al. Materials
- Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
- (2018) Zhongji Sun et al. NPG Asia Materials
- Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
- (2018) Bandar AlMangour et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel and alumina composite: Experimental and simulation studies on processing parameters, microstructure and mechanical properties
- (2018) Xinwei Li et al. MATERIALS & DESIGN
- Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
- (2018) Claire Bruna-Rosso et al. MATERIALS & DESIGN
- Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality
- (2018) Swee Leong Sing et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Peritectic titanium alloys for 3D printing
- (2018) Pere Barriobero-Vila et al. Nature Communications
- High Ductility in a fully martensitic microstructure: a paradox in a Ti alloy produced by selective laser melting
- (2018) A. Zafari et al. Materials Research Letters
- Additive Manufacturing of High-Entropy Alloys: A Review
- (2018) Shuying Chen et al. Entropy
- Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting
- (2018) P.D. Niu et al. INTERMETALLICS
- Microstructure simulations of Inconel 718 during selective laser melting using a phase field model
- (2018) Xiaoqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and tensile properties of Ti-Mo alloys manufactured via using laser powder bed fusion
- (2018) Nan Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A deep neural network for classification of melt-pool images in metal additive manufacturing
- (2018) Ohyung Kwon et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
- (2018) Mohamad Mahmoudi et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Modeling and simulation of thermal field and solidification in laser powder bed fusion of nickel alloy IN625
- (2018) Yiğit M. Arısoy et al. OPTICS AND LASER TECHNOLOGY
- The effect of hatch angle rotation on parts manufactured using selective laser melting
- (2018) Joseph Henry Robinson et al. RAPID PROTOTYPING JOURNAL
- In Situ Formation of a Metastable β-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V
- (2018) Florian Huber et al. Metals
- Phase Field Simulations of Microstructure Evolution in IN718 using a Surrogate Ni–Fe–Nb Alloy during Laser Powder Bed Fusion
- (2018) Balasubramaniam Radhakrishnan et al. Metals
- Fragmentation and refinement behavior and underlying thermodynamic mechanism of WC reinforcement during selective laser melting of Ni-based composites
- (2018) Mujian Xia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting
- (2018) Dongdong Gu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Antibacterial Titanium Produced Using Selective Laser Melting
- (2017) Andrew Macpherson et al. JOM
- Effect of scan line spacing on texture, phase and nanohardness of TiAl/TiB 2 metal matrix composites fabricated by selective laser melting
- (2017) Yi Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites
- (2017) Bandar AlMangour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture
- (2017) Nan Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In-situ synthesis of Ti 2 AlNb-based intermetallic alloy by selective laser melting
- (2017) Alexey Grigoriev et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Characterization of the microstructure of a selective laser melting processed Al-50Si alloy: Effect of heat treatments
- (2017) Nan Kang et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical behavior of a titanium-to-stainless steel dissimilar joint brazed with Ag-Cu alloy filler and an Ag interlayer
- (2017) Jung Gu Lee et al. MATERIALS CHARACTERIZATION
- Effect of the Scanning Speed of Treatment on the Microstructure, Microhardness, Wear, and Corrosion Behavior of Laser Metal-Deposited Ti–6AL–4V/TiC Composite
- (2017) R. M. Mahamood et al. MATERIALS SCIENCE
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Characteristic length of the solidified melt pool in selective laser melting process
- (2017) Il Hyuk Ahn et al. RAPID PROTOTYPING JOURNAL
- Direct selective laser sintering and melting of ceramics: a review
- (2017) Swee Leong Sing et al. RAPID PROTOTYPING JOURNAL
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- Microstructure and mechanical properties of vacuum diffusion bonded joints between Ti-6Al-4V titanium alloy and AISI316L stainless steel using Cu/Nb multi-interlayer
- (2017) T.F. Song et al. VACUUM
- A New Approach for Using Interlayer and Analysis of the Friction Welding of Titanium to Stainless Steel
- (2017) Muralimohan Cheepu et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment
- (2017) Xueping Ding et al. Journal of Manufacturing Processes
- Selective laser melting of weak-textured commercially pure titanium with high strength and ductility: A study from laser power perspective
- (2017) X.P. Li et al. MATERIALS & DESIGN
- Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
- (2017) Qian Wang et al. MATERIALS & DESIGN
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
- (2016) Jyoti Suryawanshi et al. ACTA MATERIALIA
- Multi-scale modeling of electron beam melting of functionally graded materials
- (2016) Wentao Yan et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Origin of grain orientation during solidification of an aluminum alloy
- (2016) H.L. Wei et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Multiscale Modeling of Powder Bed–Based Additive Manufacturing
- (2016) Matthias Markl et al. Annual Review of Materials Research
- Wear behavior and microstructure of hypereutectic Al-Si alloys prepared by selective laser melting
- (2016) Nan Kang et al. APPLIED SURFACE SCIENCE
- Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method
- (2016) S. L. Sing et al. EXPERIMENTAL MECHANICS
- Mode I fracture along adhesively bonded sinusoidal interfaces
- (2016) Fernando A. Cordisco et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Macrosegregation mechanism of primary silicon phase in selective laser melting hypereutectic Al – High Si alloy
- (2016) Nan Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improved mechanical properties of the new Ti-15Ta- x Zr alloys fabricated by selective laser melting for biomedical application
- (2016) Lamei Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
- (2016) Swee Leong Sing et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Changing the alloy composition of Al7075 for better processability by selective laser melting
- (2016) Maria L. Montero-Sistiaga et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
- (2016) M. Fischer et al. Materials Science & Engineering C-Materials for Biological Applications
- Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
- (2016) Babis Schoinochoritis et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting
- (2016) Nan Kang et al. MATERIALS & DESIGN
- Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
- (2016) Alejandro Hinojos et al. MATERIALS & DESIGN
- Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy
- (2016) Jingjing Yang et al. MATERIALS & DESIGN
- Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing
- (2016) Ashley Reichardt et al. MATERIALS & DESIGN
- A new approach to develop palladium-modified Ti-based alloys for biomedical applications
- (2016) Chunlei Qiu et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
- (2016) Jingjing Yang et al. MATERIALS & DESIGN
- Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres
- (2015) Donghua Dai et al. APPLIED SURFACE SCIENCE
- A Criterion for Topological Close-Packed Phase Formation in High Entropy Alloys
- (2015) Yiping Lu et al. Entropy
- Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
- (2015) Loong-Ee Loh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Microstructures and mechanical properties of friction stir welded lap joints of commercially pure titanium and 304 stainless steel
- (2015) K. Ishida et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel
- (2015) Mingming Ma et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
- (2015) Swee Leong Sing et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Ultrafine grained Ti-based composites with ultrahigh strength and ductility achieved by equiaxing microstructure
- (2015) L.H. Liu et al. MATERIALS & DESIGN
- Interfacial characterization of SLM parts in multi-material processing: Intermetallic phase formation between AlSi10Mg and C18400 copper alloy
- (2015) S.L. Sing et al. MATERIALS CHARACTERIZATION
- Titanium alloyed with rhenium by selective laser melting
- (2015) Edward Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Martensitic Transformation and Superelastic Properties of Ti-Nb Base Alloys
- (2015) Hee Young Kim et al. MATERIALS TRANSACTIONS
- A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
- (2015) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis and Characterization of the Role of Ni Interlayer in the Friction Welding of Titanium and 304 Austenitic Stainless Steel
- (2015) C. H. Muralimohan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
- (2015) C. Panwisawas et al. SCRIPTA MATERIALIA
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Selective Laser Melting of Ti-45Nb Alloy
- (2015) Holger Schwab et al. Metals
- Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
- (2015) Yang Liu et al. MATERIALS & DESIGN
- Dual-Material Electron Beam Selective Melting: Hardware Development and Validation Studies
- (2015) Chao Guo et al. Engineering
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Comparative study of microstructures and mechanical properties of in situ Ti–TiB composites produced by selective laser melting, powder metallurgy, and casting technologies
- (2014) H. Attar et al. JOURNAL OF MATERIALS RESEARCH
- The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
- (2014) X.P. Li et al. MATERIALS & DESIGN
- Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting
- (2014) Sheng Zhang et al. MATERIALS & DESIGN
- Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
- (2014) Z.H. Liu et al. MATERIALS CHARACTERIZATION
- Microstructural refinement and wear property of Al–Si–Cu composite subjected to extrusion and high-pressure torsion
- (2014) Ceren Gode et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influences of different filler metals on electron beam welding of titanium alloy to stainless steel
- (2014) Ting WANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- New Developments of Ti-Based Alloys for Biomedical Applications
- (2014) Yuhua Li et al. Materials
- Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
- (2014) Douglas C. Hofmann et al. Scientific Reports
- Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
- (2013) Lore Thijs et al. ACTA MATERIALIA
- Melt pool dynamics during selective electron beam melting
- (2013) T. Scharowsky et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Influence of pore characteristics on microstructure, mechanical properties and corrosion resistance of selective laser sintered porous Ti–Mo alloys for biomedical applications
- (2013) Fangxia Xie et al. ELECTROCHIMICA ACTA
- Multi-material metallic structure fabrication using electron beam melting
- (2013) Cesar A. Terrazas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multivortex convection of metal in molten pool with dispersed impurity induced by laser radiation
- (2013) O.B. Kovalev et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
- (2013) I. Yadroitsev et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and Transformation Behavior of in-situ Shape Memory Alloys by Selective Laser Melting Ti–Ni Mixed Powder
- (2013) Baicheng Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Mechanical behaviour of pressed and sintered CP Ti and Ti–6Al–7Nb alloy obtained from master alloy addition powder
- (2013) L. Bolzoni et al. Journal of the Mechanical Behavior of Biomedical Materials
- Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
- (2013) Chunze Yan et al. MATERIALS & DESIGN
- Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
- (2013) Z.H. Liu et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strength electron beam welded titanium–stainless steel joint with V/Cu based composite filler metals
- (2013) Ting Wang et al. VACUUM
- Production of Porous β-Type Ti–40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing
- (2013) Ksenia Zhuravleva et al. Materials
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Toughness of a patterned interface between two elastically dissimilar solids
- (2012) Fernando A. Cordisco et al. ENGINEERING FRACTURE MECHANICS
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties
- (2012) S. Sam et al. MATERIALS & DESIGN
- Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer
- (2012) Yongqiang Deng et al. MATERIALS & DESIGN
- Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer
- (2012) Peng Li et al. MATERIALS CHARACTERIZATION
- Interfacial reactions and strength properties in dissimilar titanium alloy/Ni alloy/microduplex stainless steel diffusion bonded joints
- (2012) S. Kundu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanocomposites: a review of technology and applications
- (2011) Robert Bogue ASSEMBLY AUTOMATION
- Numerical study on the effects of hierarchical wavy interface morphology on fracture toughness
- (2011) Bing-Wei Li et al. COMPUTATIONAL MATERIALS SCIENCE
- The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI 316 L electron beam and Nd:YAG laser joints
- (2011) I. Tomashchuk et al. INTERMETALLICS
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
- (2011) Wang Di et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
- (2011) Baicheng Zhang et al. MATERIALS & DESIGN
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting
- (2011) B. Gorny et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
- (2010) Ruidi Li et al. APPLIED SURFACE SCIENCE
- Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies
- (2010) Itziar Tolosa et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure at friction stir lap joint interface of pure titanium and steel
- (2010) Jinsun Liao et al. MATERIALS LETTERS
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characteristics of the bond in Cu–H13 tool steel parts fabricated using SLM
- (2008) O.M. Al-Jamal et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now