Fabrication, optimization and characterization of preformed-particle-gel containing nanogel particles for conformance control in oil reservoirs

Xanthan‐based Hydrogel for Stable and Efficient Quasi‐Solid Truly Aqueous DSSC with Cobalt Mediator

(2021) Simone Galliano et al.   Solar RRL

Rational reconfiguration of a gradient redox mediator with in-situ fabricated gel electrolyte for Li–air batteries

(2021) Yinwei Fu et al.   CHEMICAL ENGINEERING JOURNAL

Synthesis optimization and characterization of high molecular weight polymeric nanoparticles as EOR agent for harsh condition reservoirs

(2020) Mohsen Seid Mohammadi et al.   JOURNAL OF POLYMER RESEARCH

Pd-induced phase separation in poly(methyl methacrylate) telopolymer: synthesis of nanostructured catalytic Pd nanorods

(2020) Sajjad Husain Mir et al.   COLLOID AND POLYMER SCIENCE

Thermo-responsive poly(N-isopropyl acrylamide) hydrogel with increased response rate

(2020) M. Bhagya Dharmasiri et al.   POLYMER BULLETIN

Hydrogel Electrolytes Based on Xanthan Gum: Green Route towards Stable Dye-Sensitized Solar Cells

(2020) Simone Galliano et al.   Nanomaterials

Polymeric Nanoparticles: Production, Characterization, Toxicology and Ecotoxicology

(2020) Aleksandra Zielińska et al.   MOLECULES

Field Application of Nanoscale Polymer Microspheres for In-Depth Profile Control in the Ultralow Permeability Oil Reservoir

(2020) Ganggang Hou et al.   Frontiers in Chemistry

Characteristics of Weak-Gel Flooding and Its Application in LD10-1 Oilfield

(2020) Cheng Wang et al.   ACS Omega

Network-gel strength relationship and performance improvement of polyacrylamide hydrogel using nano-silica; with regards to application in oil wells conditions

(2019) Camellia Zareie et al.   JOURNAL OF MOLECULAR LIQUIDS

A New Method of Plugging the Fracture to Enhance Oil Production for Fractured Oil Reservoir using Gel Particles and the HPAM/Cr3+ System

(2019) Lei Zhang et al.   Polymers

Poly(p-phenylenediamine)-based nanocomposites with metal oxide nanoparticle for optoelectronic and magneto-optic application

(2019) Sudhir Kumar et al.   POLYMER BULLETIN

A Recrosslinkable Preformed Particle Gel for Conformance Control in Heterogeneous Reservoirs Containing Linear-Flow Features

(2019) Jingyang Pu et al.   SPE JOURNAL

Poly(glycidyl ether)s recycling from industrial waste and feasibility study of reuse as electrolytes in sodium-based batteries

(2019) Giulia Piana et al.   CHEMICAL ENGINEERING JOURNAL

Effect of multiple factors on preformed particle gel placement, dehydration, and plugging performance in partially open fractures

(2019) Ze Wang et al.   FUEL

Dual thermo- and pH-responsive poly(N-isopropylacrylamide-co-(2-dimethylamino) ethyl methacrylate)-g-PEG nanoparticle system and its potential in controlled drug release

(2019) Aylar Najafipour et al.   POLYMER BULLETIN

Synthesis and characterization of pH- and thermo-responsive hydrogels based on poly(2-cyclopropyl-2-oxazoline) macromonomer, sodium acrylate, and acrylamide

(2019) Juan Carlos Rueda et al.   POLYMER BULLETIN

Delayed-Crosslink Hydrogel for Improving Oil Recovery in Differential Heterogeneous Reservoirs

(2019) Feifei Sun et al.   ACS Omega

Sodium silicate gelants for water management in naturally fractured hydrocarbon carbonate formations

(2018) Dimitrios Georgios Hatzignatiou et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Areal sweep efficiency improvement by integrating preformed particle gel and low salinity water flooding in fractured reservoirs

(2018) Ali K. Alhuraishawy et al.   FUEL

Experimental research of high strength thermally stable organic composite polymer gel

(2018) Zeeshan Ali Lashari et al.   JOURNAL OF MOLECULAR LIQUIDS

Experimental study of swelling and rheological behavior of preformed particle gel used in water shutoff treatment

(2018) Majid Abedi Lenji et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Conductive Polymer-Ag Honeycomb Thin Film: The Factors Affecting the Complexity of the Microstructure

(2018) Sajjad Husain Mir et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Review—Organic-Inorganic Hybrid Functional Materials: An Integrated Platform for Applied Technologies

(2018) Sajjad Husain Mir et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Preparation and salt-insensitive behavior study of swellable, Cr3+-embedded microgels for water management

(2018) Jingyang Pu et al.   JOURNAL OF MOLECULAR LIQUIDS

Dye-Sensitized Solar Cells: Fundamentals and Current Status

(2018) Khushboo Sharma et al.   Nanoscale Research Letters

Experimental investigation of asphaltene-augmented gel polymer performance for water shut-off and enhancing oil recovery in fractured oil reservoirs

(2018) Ghodsieh Moosa Hasankhani et al.   JOURNAL OF MOLECULAR LIQUIDS

Polymer Gel Systems for Water Management in High-Temperature Petroleum Reservoirs: A Chemical Review

(2017) Daoyi Zhu et al.   ENERGY & FUELS

Mechanical entrapment analysis of enhanced preformed particle gels (PPGs) in mature reservoirs

(2017) Amir Farasat et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Synthesis of polymeric nano/microgels: a review

(2017) Yusof Bin Hamzah et al.   JOURNAL OF POLYMER RESEARCH

One-Pot Fabrication of Hollow Polymer@Ag Nanospheres for Printable Translucent Conductive Coatings

(2017) Sajjad Husain Mir et al.   Advanced Materials Interfaces

Experimental investigation of a novel foam formulation to improve foam quality

(2016) Zeinab Derikvand et al.   JOURNAL OF MOLECULAR LIQUIDS

Fabrication of Polymer-Ag Honeycomb Hybrid Film by Metal Complexation Induced Phase Separation at the Air/Water Interface

(2016) Sajjad Husain Mir et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Development of Hierarchical Polymer@Pd Nanowire-Network: Synthesis and Application as Highly Active Recyclable Catalyst and Printable Conductive Ink

(2016) Sajjad Husain Mir et al.   ChemistryOpen

A laboratory and simulation study of preformed particle gels for water conformance control

(2015) Ali Goudarzi et al.   FUEL

Optimized synthesis and swelling properties of a pH-sensitive semi-IPN superabsorbent polymer based on sodium alginate-g-poly(acrylic acid-co-acrylamide) and polyvinylpyrrolidone and obtained via microwave irradiation

(2015) Mohammad Tally et al.   JOURNAL OF POLYMER RESEARCH

Preformed-Particle-Gel Extrusion Through Open Conduits During Conformance-Control Treatments

(2015) Abdulmohsin Imqam et al.   SPE JOURNAL

Degradable nanocomposite preformed particle gel for chemical enhanced oil recovery applications

(2014) Paul Tongwa et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Conformation and adsorption behavior of associative polymer for enhanced oil recovery using single molecule force spectroscopy

(2014) Peng Zhang et al.   JOURNAL OF POLYMER RESEARCH

Emerging electrochemical energy conversion and storage technologies

(2014) Sukhvinder P. S. Badwal et al.   Frontiers in Chemistry

Effect of pressure gradient on the flow of oil and water in gel-filled pore

(2011) Somenath Ganguly   CHEMICAL ENGINEERING RESEARCH & DESIGN

High strength poly(acrylamide)-clay hydrogels

(2011) Ekmel Helvacıoğlu et al.   JOURNAL OF POLYMER RESEARCH

New Gel Aggregates To Improve Sweep Efficiency During Waterflooding

(2011) Guanglun Lei et al.   SPE RESERVOIR EVALUATION & ENGINEERING

A comparison of composition and sequence distribution of p(AM-MADQUAT) prepared by solution and inverse microemulsion polymerization

(2009) Zhang Aiqin et al.   JOURNAL OF POLYMER RESEARCH

Synthesis and characterization of potassium humate–acrylic acid–acrylamide hydrogel

(2008) Wei Li et al.   JOURNAL OF POLYMER RESEARCH

Polymer-assisted solvothermal growth of CdS nanowires

(2008) Hongde Gai et al.   POLYMER BULLETIN