Superplasticity and mechanical properties of Al–Mg–Si alloy doped with eutectic-forming Ni and Fe, and dispersoid-forming Sc and Zr elements

The processing route towards outstanding performance of the severely deformed Al-Mg-Mn-Sc-Zr alloy

(2021) Elena Avtokratova et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization of Superplastic Deformation Behavior for a Novel Al-Mg-Fe-Ni-Zr-Sc Alloy: Arrhenius-Based Modeling and Artificial Neural Network Approach

(2021) Ahmed O. Mosleh et al.   Applied Sciences-Basel

A High-Strain-Rate Superplasticity of the Al-Mg-Si-Zr-Sc Alloy with Ni Addition

(2021) Andrey Mochugovskiy et al.   Materials

Microstructural Characterization and Tensile Properties of Al-Mg-Fe-Ce Alloy at Room and Elevated Temperatures

(2020) A. V. Mikhaylovskaya et al.   JOM

Recent Development of Superplasticity in Aluminum Alloys: A Review

(2020) Laxman Bhatta et al.   Metals

High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling

(2020) Olga Yakovtseva et al.   Materials

Effect of annealing temperature on microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn-Sc-Zr alloy

(2020) Zhongqin Tang et al.   APPLIED SURFACE SCIENCE

An investigation of thermal stability of structure and mechanical properties of Al-0.5Mg–Sc ultrafine-grained aluminum alloys

(2020) V.N. Chuvil’deev et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Experimental study of the superplastic deformation mechanisms of high-strength aluminum-based alloy

(2020) O.A. Yakovtseva et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Observation of low temperature superplasticity in an ultrafine grained AA6063 alloy

(2020) H.R. Jafarian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Superplastic Deformation Mechanisms in Fine-Grained 2050 Al-Cu-Li Alloys

(2020) Hongping Li et al.   Materials

Diffusional and dislocation accommodation mechanisms in superplastic materials

(2020) Hiroshi Masuda et al.   ACTA MATERIALIA

Effect of heat treatment on the grain size control, superplasticity, internal friction, and mechanical properties of zirconium-bearing aluminum-based alloy

(2020) A.G. Mochugovskiy et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Comparison of precipitation kinetics and mechanical properties in Zr and Sc-bearing aluminum-based alloys

(2020) A.G. Mochugovskiy et al.   MATERIALS LETTERS

The simple hyperbolic-sine equation for superplastic deformation and parameters optimization

(2020) Junzhou Yang et al.   Journal of Materials Research and Technology-JMR&T

Superplastic deformation mechanisms of an Al–Mg–Li alloy with banded microstructures

(2020) Xiaodong Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Understanding the formation of (Al,Si)3Sc and V-phase (AlSc2Si2) in Al-Si-Sc alloys via ex situ heat treatments and in situ transmission electron microscopy studies

(2020) Jayshri Dumbre et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation behavior and high strain rate superplasticity in a novel fine-grained aluminum based alloy

(2019) A.V. Mikhaylovskaya et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

New in-situ Al matrix composites based on Al-Ni-La eutectic

(2019) T.K. Akopyan et al.   MATERIALS LETTERS

Microstructure, mechanical properties and superplasticity of the Al–Cu–Y–Zr alloy

(2019) A.V. Pozdniakov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of coarse Al2CuLi phase on the hot deformation behavior of Al–Li alloy

(2019) Xiao-Ya Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of strain rate on grain refinement in the Al-Mg-Sc-Zr alloy during high-temperature multidirectional isothermal forging

(2019) Oleg Sitdikov et al.   MATERIALS CHARACTERIZATION

The effect of ultrafine-grained states on superplastic behavior of Al-Mg-Si alloy

(2019) Elena V. Bobruk et al.   MATERIALS LETTERS

The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy

(2019) A. A. Kishchik et al.   PHYSICS OF METALS AND METALLOGRAPHY

Precipitation behavior of L1 2 Al 3 Zr phase in Al-Mg-Zr alloy

(2018) A.V. Mikhaylovskaya et al.   MATERIALS CHARACTERIZATION

Al-Mg-Fe-Ni based alloy for high strain rate superplastic forming

(2018) A.A. Kishchik et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic anisotropic grain growth during superplasticity in Al–Mg–Mn alloy

(2018) Hiroshi Masuda et al.   SCRIPTA MATERIALIA

The mechanism of L12 phase precipitation, microstructure and tensile properties of Al-Mg-Er-Zr alloy

(2018) Andrey G. Mochugovskiy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Superplasticity of clad aluminium alloy

(2017) A.V. Mikhaylovskaya et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling

(2017) Mengjia Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys

(2017) Thomas Dorin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-strain-rate superplasticity of the Al–Zn–Mg–Cu alloys with Fe and Ni additions

(2017) A. D. Kotov et al.   PHYSICS OF METALS AND METALLOGRAPHY

Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment

(2016) A.D. Kotov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates

(2016) A.V. Mikhaylovskaya et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process

(2015) Liang Chen et al.   MATERIALS & DESIGN

Quench sensitivity of Al–Mg–Si alloys: A model for linear cooling and strengthening

(2015) B. Milkereit et al.   MATERIALS & DESIGN

Superplasticity of 6016 aluminum alloy at elevated temperatures

(2015) Ji-Xiang Zhang et al.   RARE METALS

A high-strength aluminium-based alloy with advanced superplasticity

(2014) A.V. Mikhaylovskaya et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of the solid-solution composition on the superplasticity characteristics of Al-Zn-Mg-Cu-Ni-Zr Alloys

(2014) A. D. Kotov et al.   PHYSICS OF METALS AND METALLOGRAPHY

Improving aging and creep resistance in a dilute Al–Sc alloy by microalloying with Si, Zr and Er

(2013) N.Q. Vo et al.   ACTA MATERIALIA

The influence of chromium on the structure and superplasticity of Al–Mg–Mn alloys

(2013) V.K. Portnoy et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy

(2012) E. Avtokratova et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity

(2011) Megumi Kawasaki et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Diffusion creep and superplasticity in aluminium alloys

(2009) K. Sotoudeh et al.   ACTA MATERIALIA

Formability in AA5083 and AA6061 alloys for light weight applications

(2009) Jun Liu et al.   MATERIALS & DESIGN

Microstructural characteristics and paint-bake response of Al-Mg-Si-Cu alloy

(2008) Yan-li JI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA