Fabrication and the mechanical and physical properties of nanocarbon-reinforced light metal matrix composites: A review and future directions

Enhancement of mechanical properties of vertically aligned carbon nanotube arrays due to N+ ion irradiation

(2020) Dariusz M Jarząbek et al.   NANOTECHNOLOGY

Effect of interfacial microstructure on the mechanical properties of GNPs/Al composites

(2020) Boyu Ju et al.   CARBON

GNP-Reinforced Al2024 Composite Fabricated through Powder Semi-Solid Processing

(2020) Lili Chen et al.   MATERIALS TRANSACTIONS

Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review

(2020) Somayeh Abazari et al.   Materials

Improving ductility of bimodal carbon nanotube/2009Al composites by optimizing coarse grain microstructure via hot extrusion

(2020) K. Ma et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Microstructure and properties of carbon nanotubes-reinforced magnesium matrix composites fabricated via novel in situ synthesis process

(2019) Haipeng Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure

(2019) Yeyang Xiang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Fabrication of aluminum-carbon nanotube nano-composite using aluminum-coated carbon nanotube precursor

(2019) Muhammad Mansoor et al.   JOURNAL OF COMPOSITE MATERIALS

Bioinspired, graphene-enabled Ni composites with high strength and toughness

(2019) Yunya Zhang et al.   Science Advances

Thermoelectric Properties of Carbon Nanotubes

(2019) Nguyen T. Hung et al.   Energies

Application of SiC particles coated with a protective Ni layer for production of Ni/SiC co-electrodeposited composite coatings with enhanced tribological properties

(2019) Piotr Jenczyk et al.   CERAMICS INTERNATIONAL

Enhanced interface interaction between modified carbon nanotubes and magnesium matrix

(2018) Bingcheng Fang et al.   COMPOSITE INTERFACES

The impact of weak interfacial bonding strength on mechanical properties of metal matrix – Ceramic reinforced composites

(2018) Dariusz M. Jarząbek   COMPOSITE STRUCTURES

Synthesis of reduced graphene oxide/aluminum nanocomposites via chemical-mechanical processes

(2018) Daeyoung Kim et al.   JOURNAL OF COMPOSITE MATERIALS

Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide

(2018) Qiu-hong Yuan et al.   MATERIALS CHARACTERIZATION

Strong, ductile, and thermally conductive carbon nanotube-reinforced aluminum matrix composites fabricated by ball-milling and hot extrusion of powders encapsulated in aluminum containers

(2018) Fumio Ogawa et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving high strength and ductility in graphene/magnesium composite via an in-situ reaction wetting process

(2018) Miao Wang et al.   CARBON

Graphene nanoplatelets and few-layer graphene studies in thermo-physical properties and particle characterization

(2018) Omer A. Alawi et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Thermal Conductivity and Tensile Properties of Carbon Nanofiber-Reinforced Aluminum-Matrix Composites Fabricated via Powder Metallurgy: Effects of Ball Milling and Extrusion Conditions on Microstructures and Resultant Composite Properties

(2018) Fumio Ogawa et al.   Acta Metallurgica Sinica-English Letters

Graphene Nanoplatelets-Based Advanced Materials and Recent Progress in Sustainable Applications

(2018) Pietro Cataldi et al.   Applied Sciences-Basel

Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method

(2018) Zhenhe Yu et al.   CARBON

In situ chemical vapor deposition of metals on vapor-grown carbon fibers and fabrication of aluminum-matrix composites reinforced by coated fibers

(2017) Fumio Ogawa et al.   JOURNAL OF MATERIALS SCIENCE

Interface Observation of Aluminum-Coated Carbon Nanofibers Prepared by in Situ Chemical Vapor Deposition

(2017) Fumio Ogawa et al.   Journal of Physical Chemistry C

Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network

(2017) Xiang Zhang et al.   Nanoscale

Quantification of the re-agglomeration of carbon nanofiber aqueous dispersion in cement pastes and effect on the early age flexural response

(2016) Catherine Stephens et al.   CARBON

Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions

(2016) B. Chen et al.   SCRIPTA MATERIALIA

Carbon Nanotube Sponges, Aerogels, and Hierarchical Composites: Synthesis, Properties, and Energy Applications

(2016) Zhiqiang Lin et al.   Advanced Energy Materials

Functionalized graphene nanoplatelets from ball milling for energy applications

(2016) Xueliu Fan et al.   Current Opinion in Chemical Engineering

Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials

(2016) Sanjay Kumar Vajpai et al.   Materials Research Letters

Microstructure evolution during fabrication and microstructure–property relationships in vapour-grown carbon nanofibre-reinforced aluminium matrix composites fabricated via powder metallurgy

(2015) Fumio Ogawa et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Deformation behavior of aluminum alloy matrix composites reinforced with few-layer graphene

(2015) S.E. Shin et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The measurement of the adhesion force between ceramic particles and metal matrix in ceramic reinforced-metal matrix composites

(2015) Dariusz M. Jarząbek et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A facile one-step method of coating aluminum on multiwall carbon nanotubes

(2015) Muhammad Mansoor et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Role of interface tailoring by Cu coating carbon nanotubes to optimize Cu–W composites

(2015) Pingan Chen et al.   JOURNAL OF MATERIALS RESEARCH

Ultrasonic Processing of Materials

(2015) Qingyou Han   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Interfacial Control of Magnetic Properties at LaMnO3/LaNiO3 Interfaces

(2015) M. Gibert et al.   NANO LETTERS

Enhanced Mechanical Properties of Graphene (Reduced Graphene Oxide)/Aluminum Composites with a Bioinspired Nanolaminated Structure

(2015) Zan Li et al.   NANO LETTERS

Defining Nano, Nanotechnology and Nanomedicine: Why Should It Matter?

(2015) Priya Satalkar et al.   SCIENCE AND ENGINEERING ETHICS

Importance of Bimodal Structure Topology in the Control of Mechanical Properties of a Stainless Steel

(2014) Zhe Zhang et al.   ADVANCED ENGINEERING MATERIALS

Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

(2014) Mina Bastwros et al.   COMPOSITES PART B-ENGINEERING

Micromechanical study of influence of interface strength on mechanical properties of metal matrix composites under uniaxial and biaxial tensile loadings

(2014) Hai Qing   COMPUTATIONAL MATERIALS SCIENCE

Powder metallurgy of Mg–1%Al–1%Sn alloy reinforced with low content of graphene nanoplatelets (GNPs)

(2014) Muhammad Rashad et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites

(2014) Mui Hoon Nai et al.   MATERIALS & DESIGN

Improved mechanical properties of magnesium–graphene composites with copper–graphene hybrids

(2014) M. Rashad et al.   MATERIALS SCIENCE AND TECHNOLOGY

Carbon Nanofibers and Their Composites: A Review of Synthesizing, Properties and Applications

(2014) Lichao Feng et al.   Materials

Nanotechnology: emerging tools for biology and medicine

(2013) I. Y. Wong et al.   GENES & DEVELOPMENT

Electroless nickel, alloy, composite and nano coatings – A critical review

(2013) Jothi Sudagar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fracture toughness of fiber metal laminates: Carbon nanotube modified Ti–polymer–matrix composite interface

(2013) Hieu TX Truong et al.   JOURNAL OF COMPOSITE MATERIALS

Discrete dislocation modeling of fracture in plastically anisotropic metals

(2013) S. Olarnrithinun et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

The role of carbon nanofiber defects on the electrical and mechanical properties of CNF-based resins

(2013) Liberata Guadagno et al.   NANOTECHNOLOGY

Additive manufacturing (AM) and nanotechnology: promises and challenges

(2013) Olga Ivanova et al.   RAPID PROTOTYPING JOURNAL

Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design

(2013) Hui Wei et al.   SCRIPTA MATERIALIA

Synthesis and properties of bulk graphene nanoplatelets consolidated by spark plasma sintering

(2012) Andy Nieto et al.   CARBON

The mechanics of graphene nanocomposites: A review

(2012) Robert J. Young et al.   COMPOSITES SCIENCE AND TECHNOLOGY

SiC formation on carbon nanotube surface for improving wettability with aluminum

(2012) Kang Pyo So et al.   COMPOSITES SCIENCE AND TECHNOLOGY

An eXtended Finite Element Method (XFEM) study on the effect of reinforcing particles on the crack propagation behavior in a metal–matrix composite

(2012) Chang Ye et al.   INTERNATIONAL JOURNAL OF FATIGUE

The Interface and Interphase in Polymer Matrix Composites: Effect on Mechanical Properties and Methods for Identification

(2012) David A. Jesson et al.   Polymer Reviews

Effect of filler dispersion on the electromechanical response of epoxy/vapor-grown carbon nanofiber composites

(2012) A Ferreira et al.   Smart Materials and Structures

Improving the wettability of aluminum on carbon nanotubes

(2011) Kang Pyo So et al.   ACTA MATERIALIA

Carbon nanotube–polymer interactions in nanocomposites: A review

(2011) Meysam Rahmat et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites

(2011) Ali Mazahery et al.   JOURNAL OF COMPOSITE MATERIALS

Fabrication of Carbon Nanotube Reinforced Aluminum Matrix Composite by Spark Plasma Sintering and Hot Extrusion Hybrid Process

(2011) Hiroki Kurita et al.   JOURNAL OF THE JAPAN INSTITUTE OF METALS

Multi-Walled Carbon Nanotube-Aluminum Matrix Composites Prepared by Combination of Hetero-Agglomeration Method, Spark Plasma Sintering and Hot Extrusion

(2011) Hiroki Kurita et al.   MATERIALS TRANSACTIONS

Aluminium in Innovative Light-Weight Car Design

(2011) Jürgen Hirsch   MATERIALS TRANSACTIONS

One-dimensional ZnO nanostructures: Solution growth and functional properties

(2011) Sheng Xu et al.   Nano Research

Stress-gradient plasticity

(2011) S. S. Chakravarthy et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes

(2011) Lin Jiang et al.   SCRIPTA MATERIALIA

Environmental Implications of Nanotechnology—An Update

(2011) Leo Stander et al.   International Journal of Environmental Research and Public Health

Highly dispersed carbon nanotube reinforced cement based materials

(2010) Maria S. Konsta-Gdoutos et al.   CEMENT AND CONCRETE RESEARCH

Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review

(2010) Peng-Cheng Ma et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Thermal conductivity of carbon nanotube reinforced aluminum composites: A multi-scale study using object oriented finite element method

(2010) Srinivasa R. Bakshi et al.   COMPUTATIONAL MATERIALS SCIENCE

Effects of ultrasonic treatment on microstructure and tensile strength of AZ91 magnesium alloy

(2010) M. Khosro Aghayani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites

(2010) Katsuyoshi Kondoh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanocomposites: Structure, Phase Behavior, and Properties

(2010) Sanat K. Kumar et al.   Annual Review of Chemical and Biomolecular Engineering

Carbon Nanotube Sponges

(2009) Xuchun Gui et al.   ADVANCED MATERIALS

Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming

(2009) T. Laha et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites

(2009) Hyunjoo Choi et al.   JOURNAL OF MATERIALS RESEARCH

Nanocomposites: synthesis, structure, properties and new application opportunities

(2009) Pedro Henrique Cury Camargo et al.   Materials Research-Ibero-american Journal of Materials

Influence of Fiber Surface Structure on Interfacial Structure between Fiber and Matrix in Vapor Grown Carbon Fiber Reinforced Aluminum Matrix Composites

(2009) Kuang-Chih Chang et al.   MATERIALS TRANSACTIONS

Fabrication and Electrical Conductivity of Vapor Grown Carbon Fiber Reinforced Aluminum Composites

(2009) Zhe-Feng Xu et al.   MATERIALS TRANSACTIONS

Nanocomposite polymer hydrogels

(2008) Patrick Schexnailder et al.   COLLOID AND POLYMER SCIENCE

Carbon Nanofiber Production

(2008) Vikas Khanna et al.   JOURNAL OF INDUSTRIAL ECOLOGY

Reinforcement with carbon nanotubes in aluminum matrix composites

(2008) H CHOI et al.   SCRIPTA MATERIALIA

Synthesis of Amphiphilic Graphene Nanoplatelets

(2008) Jianfeng Shen et al.   Small

Multi-walled carbon nanotube-reinforced magnesium alloy composites

(2007) Y. Shimizu et al.   SCRIPTA MATERIALIA